Broadband sharing Internet access, broadband sharing usage method

Landlord,Since you are given a fixed IP and gateway and DNS,It probably belongs to what kind of community network.。

It is recommended that you use the Sygate Home version, which is relatively easy to use, and through Sygate

As a **, we have connected more than a dozen computing units of the company on an ADSL line, and there has been no problem.

Just buy a road bike.

Nowadays, it is not too mature to use software to share the Internet.

The most effective way to do this is to use a computer as a host.

Or buy a router.

XP's built-in connection sharing + hub, just right.

One person dials up as the host.

Others set both the gateway and DNS as the host IP

You can share the Internet.

With a router. If it's adsl, his own cat has a routing function, you can log in to the gateway, the IP address is generally: or, the user name is your adsl account, the password is your ** number, set your cat as a router inside, and as long as you log in to the network after the hub is directly connected outside, the cat will dial by itself, and it is very convenient to share the Internet.

Depressed! Why do you always have such a problem?

Go to My Space to find out! I've written a solution specifically for people like you.

In the academic discussion area inside, find it yourself.

1. Click on the small computer (network) icon in the lower right corner of the screen, which has the open network and sharing center.

2. Select Manage Wireless Network in the upper left corner - select Add.

3. Select Create Temporary Network - click Next - Enter the network name (this is free to think of yourself, it is best to use a combination of numbers and letters).

4. Select WEP as the security type - the security key is 10 digits - and then check the lower left corner to save this network (very important, otherwise it will have to be recreated in the future), create a new one, and then close it.

5. Go back - find and change adapter settings - right-click on the local connection, select Properties, and then select Share, and select the option as"Wi-Fi connection", then put that one to allow other networks, tick on it, and click OK, okay, sharing is done.

6. Search for the network name you took on your mobile phone or computer to connect, and enter the password; After going online, click on the network name you set to connect to the Internet, the computer connection prompt is waiting for the user, and when your mobile phone is also connected to this network, the connection is successful.

1. Add a wireless router.

2. If you use wifi through the computer, you must first have a notebook, and the system is win7, win8 has not found this setting, refer to the following settings:

The network status in the lower right corner of the taskbar, right-click to open the network and sharing center, a new network setting option will pop up, drag the scroll bar to the last column, find the option to set up a wireless temporary network, select the next step, there will be a connection introduction about the temporary network, followed by the wireless network name and security password setting options, after setting the name and password, save the network, and then the system will automatically configure. After the configuration, the system prompts that the wireless network can be used, click below to start the Internet sharing connection, the system will automatically set the sharing configuration, and the system prompts that the inernet connection sharing has been enabled, then you can turn on other devices or laptop devices to turn on the WiFi, and connect this hotspot to surf the Internet.

It can also be done through a free software called connectify. After installation, you can share the wireless network after a simple setting, note that the mode option is wireless access mode, select access point, wap2 mode.

If you use a router, you can choose a network router.

1. In the start menu, locate all programs - accessories - command prompt, right-click on the command prompt, and then select [Run as administrator], if the dialog box for entering the password pops up, enter your login password.

2. In the command prompt, we enter the following command: netshwlansethostednetworkmode-allowssid=cmcckey=: whether to enable the virtual wifi network card, change to allow to enable, the virtual network card will disappear.

The SSID specifies the name of the wireless network, which is the name of the network that someone else sees when they search for a wireless network. key, the password for the wireless network. This password is used to encrypt the Wi-Fi network securely, so it can prevent others from using your network.

3. Tap the wireless network icon on the taskbar to open a list, then click [Network and Sharing Center], and click [Change Adapter Settings] in the Network and Sharing Center.

4. Find the network where you can access the Internet, I am using the local connection to access the Internet, right-click the local connection, and then select [Properties].

5. In the properties dialog box that opens, switch to the sharing option and check [Allow other network users to pass this ......Then select one of the drop-down lists below labeled [MicrosoftVirtualWiFi......There is this description under Wireless Network 2, so we select Wireless Network 2 and then click the OK button. You'll see that the word "shared" appears here on the local connection.

6. Then go back to the command prompt of Paiyou and enter netshwlanstarthostednetwork to turn on the wireless network we set up before. Change start to stop to turn off the wireless network. Then go to someone else's computer to find out if there is a network you have set up, connect and enter the password, and the other person will be able to surf the Internet.

However, after you restart your computer, you will not be able to share the network, so for more convenient settings, we provide the following methods.

7. Open a notepad, type netshwlanstarthostednetwork, click File--Save, and save the file.

8. In the Save As dialog box, set the suffix of the file to cmd, and then save.

9. Find the file you saved, double-click to open the network sharing, every time you turn on the computer, if you want to share the network, just double-click the file.

Shared broadband refers to the access mode in which multiple people share the same broadband resource.

Generally, enterprises and cell broadband use shared broadband, because the size of this bandwidth is fixed.