After the barrel automatic washing machine is powered on, the indicator light is on, and the reason

Maybe I pressed that button. You unplug it and try again. My washing machine sometimes has to be unplugged and plugged in.

The panel lights of the automatic washing machine are all on, but there is no action, and the fault is eliminated in this way:

1. The panel lights of the automatic washing machine are all on, but there is no action, which is due to the failure of the computer board or the failure of the computer board buttons.

Second, the fault handling method:

1. First of all, check whether the contact of the keys of the computer board is normal, if it is normal, it is the internal fault of the computer board.

2. Replace the computer board, or contact professional personnel for maintenance.

Possible reasons for the partial failure of the buttons on the operation panel of the fully automatic washing machine:

1. It may be due to the high humidity of the use environment, which causes the key contacts to be damp.

2. The failure of the keys may be poor contact, or the computer board is damaged.

3. Button failure may also be a circuit board failure.

4. It is recommended to contact professional maintenance personnel for maintenance.

A1The base mat of the washing machine should be inspected once every one to two months, and the lower drain must be higher than the drain pipe to avoid residual moisture in the drain pipe; Open the sink lid from time to time to allow the water in the washing machine to dry naturally to prevent mold growth.

2.When the washing machine is not used for a long time, unplug it.

3.After washing clothes, the water in the washing machine must be drained, the lid opened to dry, so that the residual water does not form microorganisms in the machine. The water filling port of the washing machine is easily clogged by dirt when used for a long time, reducing the water flow rate.

Therefore, it should be cleaned regularly, and the drain of the washing machine should also be cleaned to avoid the growth of bacteria.

1. Please confirm whether to press the on/off button to start, and you need to press the start button after the washing machine is plugged in. When you confirm that the power supply is fine, check the computer board again.

Second, it may be a problem with the computer control board. How to check the computer board:

1. Lift the outer edge of the control panel upwards with your hand to separate it from the frame.

2. Unscrew the screws, take out the waterproof board first, remove the circuit board, and unplug the wire plug from the computer board.

3. Loosen the water level switch, install the fastening screws of the switch and the power switch, and remove the switches one by one.

Summary. There are many reasons for this: 1. First of all, the most likely thing to happen is that the door of the drum washing machine is not closed in place, so that the drum washing machine is powered on but cannot be started; Just close the drum washing machine door back in place. 2. Capacitors are most likely to have problems, followed by motors.

Check if the capacitor and motor are working properly. 3. Secondly, check whether the brake of the dryer is correct and whether a spring of the brake falls off. 4. Open the back cover and check whether the brake line is broken and whether the brake is locked.

5. The aging and loosening of the belt will also cause dehydration and weakness. 6. Check whether the computer board is damaged. Article 2-6 faults are warranted to the after-sales service center of the manufacturer of the drum washing machine, and the after-sales service center will send personnel to the site for inspection and maintenance.

The drum washing machine, power on and press Qijian, only the display does not start running. What is the fault?

Pro, there are many reasons 1, first of all, the most likely thing to happen is that the door of the drum washing machine is not closed in place, so that the hand drum washing machine is energized but cannot be started; Just close the drum washing machine door back in place. 2. Capacitors are most likely to have problems, followed by motors. Check if the capacitor and motor are working properly.

3. Secondly, check whether the brake of the dryer is taking the false suspicion, and whether the brake has a spring falling off. 4. Open the back cover and check whether the brake line is broken and whether the brake is locked. 5. The aging and loosening of the belt will also make a reputation and become dehydrated and weak.

6. Check whether the computer board is damaged. Article 2-6 faults are warranted to the after-sales service center of the manufacturer of the drum washing machine, and the after-sales service center will send personnel to the site for inspection and maintenance.

Drum washing machine, originated in Europe, the washing method is designed to imitate the principle of rod hammer hitting clothes, by stainless steel inner barrel, mechanical program controller, after phosphating, electrophoresis, spraying triple protection of the shell, and a number of bulky water vertical mud blocks are used to balance the huge centrifugal force generated when the drum rotates to do repetitive movement, plus the joint action of washing powder and water to make the clothes clean. Because the materials used for the collapse of wax are mainly made of steel, the life span is generally about 10 or 20 years.

There are many cases where a front-loading washing machine turns on automatically.

1. The display screen flashes, and the display screen of the washing machine flashes, which may be caused by changes in the external environment, such as changes in temperature and humidity. It can also be caused by a malfunction of the internal circuitry. These problems can cause the washing machine to not work properly.

2. The power supply voltage is too low, the voltage that the washing machine should reach is about 5V when the washing machine is working normally, if it is lower than this voltage, it will cause the motor to not start, or the inverter will be damaged, and the display screen will also flicker. Solution: Disconnect the power supply and turn it back on.

If this phenomenon does not occur in the washing machine, it means that the battery is dead.

3. The motor does not rotate, under normal circumstances, the Bosch drum washing machine motor does not rotate, usually appears in the start and stop stages can not run smoothly. First of all, you should check whether the motor and power supply are wired correctly. Secondly, check whether the power cord and motor housing are loose.

Third, turn the knob by hand to turn the washing machine 3 times and determine whether to turn to the desired speed. If the motor does not rotate and the knob does not turn slowly, it means that there is a problem with the motor or power cable. If the motor does not rotate or the bearing is loose and affects the service life of the motor and the sound made when the motor is running, it proves that the motor may be damaged.

If the damaged parts of the Hengfan are not replaced in time after damage, it will generally appear in the washing process, and the control power interface and control board should be checked to see if they are in good condition. At the end of washing, the washing machine should be turned off and laid flat so that it can be smoothly dehydrated and the air can be released. Finally, open the lid and let it dry, cleaning the interior and surroundings of dust.

4. The battery is aging, and when the washing machine is operating normally, electricity will be generated, and in the process of our use, the battery will also be aging and damaged. Therefore, when the battery is insufficient, it will also cause the display screen to flicker. Workaround:

Check that the power plug of the washing machine is plugged in securely and replace it with a longer battery. Or check whether the inner cylinder, water pipe, electrical switch is in a closed state, if there is water leakage, it means that the inner cylinder, electrical switch has been aged and lost its flexible state and short circuit, leakage.

5. If the circuit fails, first check whether the power cord is loose or falling off or loose to a certain extent, and the power switch needs to be replaced or repaired.

Summary. Hello dear, happy to answer your <>

If the display light of the drum washing machine is not on, but it can work normally, there are generally the following possible situations:1Faulty display light:

It may be caused by the failure of the display light itself or the loose wiring. 2.Power failure:

The display light of the drum washing machine is related to the power supply**, if there is a problem with the power supply, it may cause the display light to not light <>up

<> what is the situation when the drum washing machine does not show that the light is on and can work normally.

Hello Stove Oak, happy to answer your <>

If the display light of the drum laundry concealment machine is not on, but it can work normally, there are generally the following possible situations: 1Faulty display light:

It may be caused by the failure of the display light itself or the loose wiring. 2.Power failure:

The display light of the drum washing machine is related to the power supply**, if there is a problem with the power supply, it may cause the display light to not light <>up

<> kiss, and there is <>

It should be noted that if the display light of the drum washing machine is not lit, but it can work normally, there may be some hidden dangers, such as the fault cannot be found in time or the problem cannot be solved in time. It is recommended to repair or replace it in a timely manner. If you are not familiar with the operation <>of maintenance shirts, it is recommended to seek professional maintenance services