What should I do if the bucket of my Siemens drum washing machine is broken?

1. Bearing damage or lack of lubricating oil Due to the long-term use of the washing machine, the motor bearing and the inner shank spindle bearing lack lubricating oil, or the shaft bearing is broken. Strong noises and unusual noises are emitted during washing, especially during high-speed dewatering.

During the overhaul, the power source motor should be inspected first, and then the transmission system should be analyzed and checked. Remove the front-loading washing machine first.

The back cover, the transmission is all exposed. Lubricating oil can be filled into the main shaft through the motor bearing or through the fork oil injection hole of the outer barrel, and the noise can be eliminated after starting the washing machine. If the noise is not significantly reduced, it means that the bearing is damaged, and the motor bearing or the bearing of the washing inner barrel spindle should be replaced.

Abnormal noise can be eliminated after replacement.

2. The problem of the transmission belt The quality of the transmission pulley is poor, the wheel groove is not important, or the belt is aging, there are burrs or the size of the pulley is deviated during assembly, and there is no level, which will lead to the appearance of noise.

When overhauling, the pulley should be removed to readjust the position of the transmission wheel and the tension of the belt. If the pulley is of poor quality or the belt is aged, it needs to be replaced with a new belt and the abnormal noise of the pulley can be erased.

3. If the position of the heater moves or the foreign body is stuck in the moving part, after long-term use, the heating tube of the heater is deformed, and the washing compartment is rubbed against the heater when it rotates, making an abnormal sound. Or there is a foreign body stuck in the moving part, or the inner handle is deformed, so that the inner and outer barrels rub against each other when rotating, making abnormal sounds.

The drum washing machine for Siemens after-sales service has become the main model in the current international washing machine market due to its many advantages such as low wear, non-winding, washable cashmere, silk fabric and large capacity. There are many brands of drum washing machines on the market, which seem to be similar, but in fact, there are still differences in the quality and function of different brands of drum washing machines, so be sure to compare them carefully when purchasing. Usually, the drum washing machine is a front-opening type, which needs to occupy a large space, and Chinese families generally place the washing machine in a small kitchen or bathroom, which is very inconvenient to use.

Therefore, consumers need to consider many factors when buying a front-loading washing machine and understand some precautions when purchasing a front-loading washing machine. 1. Function selection drum washing machine launched "full intelligence" type, some washing machines have countless functions, whether we really need these functions, it is necessary to decide according to the different needs of each family. This is the intelligent function of the drum washing machine, such as automatic foam detection, good fabric clothes, need to use low-foam laundry detergent, more advanced drum washing machine brands have a detection function; There are also automatic detection of drying, automatic detection of dehydration balance, etc.

2. The washing capacity of the drum washing machine is selected Our common drum washing machine capacity includes kg, kg, 6 kg, 7 kg, 8 kg, 9 kg, 10 kg, etc. Washing capacity The most common washing capacity of drum washing machines is kg, which is suitable for 3-4 people in general. You can wash about 10 pounds of clothes.

The capacity of 7 kg - 8 kg can already clean floor-to-ceiling curtains. Through the survey of consumers' laundry habits, some companies have produced and manufactured smaller capacity washing machines, so that consumers no longer worry about the accumulation of clothes, and small pieces of clothes can be washed at any time without accumulation.

girl Siemens washing machine no dehydration Fault phenomenon: no water comes out of the washing machine when washing clothes Analysis of the automatic washing machine when dehydration, add rated capacity clothes, the reason for the weak operation of the dehydration bucket: The belt is relaxed, worn and elongated, so that the belt runs slippery and cannot drive the dehydration bucket to operate, resulting in dehydration weakness; The wear diameter of the clutch square wire torsion spring becomes larger and rusty, so that the square wire torsion spring cannot hold the dehydration shaft and drive the normal operation of the dehydration barrel, resulting in dehydration weakness.

Solution 1Tighten the belt. Move the motor position backwards or replace the belt; 2.

Remove the clutch pulley, replace the square wire torsion spring, or replace the clutch. During the operation of the dehydration bucket of the Siemens washing machine, it suddenly stops running and changes the water inlet state Fault phenomenon: during the operation of the dehydration bucket, it suddenly stops running and changes the water inlet state Analyze the reason why the dehydration bucket suddenly stops running and changes the water inlet state during the operation process:

The whole machine is unevenly placed, the barrel body is unbalanced during operation, the shaking amplitude is too large, and the safety switch is hit, and the computer board automatically judges that the clothes are unbalanced, and the water inlet corrects the unbalanced state; The clothes in the bucket are biased to one side or the contact pressure of the safety switch is not enough, the operation vibration hits the safety switch, and the computer board stops running and changes the water rinsing program to correct the imbalance in the barrel. Solution 1

Adjust the balance of the fuselage or place the clothes and close the cover; 2.Adjust the contact pressure of the safety switch; 3.Replace the safety switch.

Siemens washing machine dehydration bucket does not rotate, wave wheel rotation Fault phenomenon: washing machine dehydration bucket does not rotate, wave rotation Analysis When the washing machine enters the dehydration state, the dehydration bucket does not rotate, and the wave wheel rotates: The clutch pawl is not opened, so that the square wire torsion spring can not hold the brake wheel to drive the dehydration bucket to run; The clutch square wire torsion spring is rusty and weared, so that the diameter of the square wire torsion spring becomes larger, and the brake wheel cannot be held tightly to drive the dehydration bucket to run; The drain sleeve screw is loose, the distance between the brake arm and the gear sleeve is too open, or the electromagnet is burned, causing the clutch pawl to not be opened, so that the square wire torsion spring can not hold the brake wheel to drive the dehydration bucket to run.

Solution 1Adjust the distance by which the clutch pawl is opened in millimeters; 2.Replace the square wire torsion spring or clutch; 3.

Adjust the distance between the gear sleeve screw and the brake arm in millimeters; 4.Replace the drain solenoid. Although here is the maintenance common sense of Siemens drum washing machines, we can also compare these solutions to repair other types of Siemens washing machines, and some of the principles are still the same.

Check the warranty card to see if it's under warranty. Contact after-sales service to deal with it in a timely manner.

Siemens drum washing machine according to the requirements, an average of once a year need to be cleaned and maintained, when your washing machine has laundry and dehydration when there is abnormal noise, do not reluctantly use, and the washing machine vibration or noise, should immediately stop using, and immediately call our company maintenance **400-889-9999, waiting for our company's maintenance personnel to come to your door to eliminate the fault.

1. Advantages of Siemens drum washing machines.

1. Clothes will not appear overwinded.

2. It has a drying function.

3. High cleanliness.

4. Little wear and tear on clothes: the clothes are in contact with the convex groove of the inner cylinder, forming rubbing and beating, just like hand washing, and it is necessary to choose the drum washing machine for silk, wool and other more valuable clothes suitable for machine washing.

5. Water saving: Washing by rolling the drum does not require a large amount of water flow, so it can save water.

Second, the general treatment method of Siemens washing machine is dehydrated and not dry.

1. Check the safety switch, the washing machine is adjusted to the dehydration state, press the safety switch brake arm to low, if the computer board alarms and the digital tube shows E1, the safety switch or computer board should be replaced.

2. If the safety switch brake arm can be dehydrated normally after pressing it with hands or tools, it means that the power-off distance of the safety switch is low, and the safety switch should be replaced at this time.

3. If in the dehydration state, only the wave wheel rotates and the inner barrel does not rotate, at this time the tractor should be checked whether the clutch pawl and ratchet wheel have been separated, if not, it may be that the adjusting rod nut on the drain valve is loose and worn, resulting in insufficient opening distance, at this time, the distance of the adjusting rod should be readjusted to make it able to separate the pawl and ratchet of the clutch.

3. The treatment method of dehydration and non-drying of Siemens washing machine without drainage and dehydration.

1. Disassemble the washing machine and check whether the plug-ins of the computer board and drain valve are loose. 2. Select the dehydration function, and use a universal meter to measure whether there is voltage between the two plug-ins of the tractor (drain valve).

There is 220v, which means that the tractor (drain valve) is broken; There is no 220v, saying that the brain plate is broken.

4. Precautions: When the washing machine is dehydrated or not dry:

1. The belt is aging and needs to be replaced.

2. If the washing machine adjuster fails, some can be repaired, and some need to be replaced.

3. The capacitor of the motor is aging, and the capacity becomes smaller and needs to be replaced (the probability of failure is very small). Occasionally, if there is no dehydration: 1. The possible situation is that the upper cover is not covered well, and the reason why the lid is not covered well may also be caused by the poor contact of the travel switch in the cover, and the key is to see whether the display screen shows E2.

2. It may also be that the clothes are uneven, and the washing machine needs to re-enter the water and wash it again after sensing the unevenness.

3. In addition, see whether the foot of the washing machine is flat, the bottom corner of the front can be adjusted in height, in short, the bottom angle should be adjusted to make the washing machine in a horizontal state, which can ensure that the center of gravity of the inner cylinder is on the motor shaft, in order to dehydrate normally.

The above content is for you to introduce the Siemens washing machine dehydration and do not dry the treatment method, I hope this knowledge will help you deal with the problem of dehydration and not drying of the Siemens washing machine you purchased.

Is there a sound tube does not rotate or no sound does not turn, there is a sound indicating that the motor and other problems may be broken, there is no sound to check it is troublesome, there are many reasons, including power supply, motor, control board, etc., need professionals to judge.

Suggested treatment: 1. The washing machine drum is broken and needs to be repaired and replaced. Since the washing machine has not been designed in a unified way, the parts of the washing machine produced by each factory are different.

It is necessary to repair or purchase replacement drum parts for the washing machine. 2. It is recommended to contact the after-sales service department of the washing machine according to the model and brand of the washing machine, repair or purchase and replace, or ask professional maintenance personnel to come to see. There are several reasons for this:

1. The reason for not entering the water. After the power is turned on, use your hand to sense whether there is a slight vibration sensation at the water inlet valve. 2. The water does not stop.

When the faucet is turned on, water will enter, and the inlet valve will be stuck with foreign objects; Turn down the water level, the inlet water is obviously high, or adjust the water level, the inlet water flows from the overflow pipe, adjust the sensor screws or change the sensor. 3. Can't hold water. Whether the retractor movement channel is stuck, hand pull the drain lever, test whether the drain valve and clutch brake lever are stuck or have too much resistance.

4. No washing fault. The water level is low or the water inflow is slow, and the water level standard is not met; Listen to the sound of the motor working. 5. Washing one-way rotation (can only turn counterclockwise, not clockwise).

6. Repeated rinsing, symptoms: After draining, suddenly brake and enter the water when spinning. 6. No drainage or slow drainage.

Whether the drain pipe is down, whether the water in the drain pipe freezes into ice clogging.

Summary. Kiss <>

I'm glad to answer for you, Siemens drum washing machine things fall in, under normal circumstances, larger things can't get into the drum washing machine between the inner and outer barrels. If something really goes in, it doesn't matter, at the bottom of the drum washing machine, at the drain pump, there is a dirty outlet, open it, and the things that can't be drained are stored in it. Generally, this sewage outlet is in the lower right corner of the machine, note that there will be water in it when opened, and there is no less.

When you open it, you can see the dirt directly. <>

Siemens front-loading washing machine stuff fell in.

Kiss <>

I'm glad to answer for you, Siemens drum washing machine things fall in, under normal circumstances, larger things can't get into the drum washing machine between the inner and outer barrels. If something really goes in, it doesn't matter, at the bottom of the drum washing machine, at the drain pump, there is a dirty outlet, open it, and the things that can't be drained are stored in it. Generally, this sewage outlet is in the lower right corner of the machine, note that there will be water in it when opened, and there is no less.

When you open it, you can see the dirt directly. <>

<> knowledge expansion <>

: How to remove foreign objects from the drum of the washing machine: 1. Remove the upper cover of the washing machine and remove the cover between the inner and outer cylinders.

2. Then put the washing machine down, lift the back of the washing machine and shake it vigorously, and the coin will fall down the inner wall of the outer cylinder. 3. Use a small magnet, bolt it tightly with a sturdy thin line (such as surgical sutures used in hospitals), put it down from the position of the drainage outlet between the inner bucket and the outer Jane filled with water, and keep pulling the rope up and down. 4. Finally, it is necessary to disassemble the machine to take foreign objects, and it is recommended to contact professional maintenance personnel to operate.

If something really goes in, it doesn't matter, at the bottom of the drum washing machine, at the drain pump, there is a dirty outlet, open it, and the things that can't be drained are stored in it.

Summary. If your Siemens washing machine bucket is broken, you need to replace it with a new one. Generally, a repairman can replace a new bucket for you, but the cost can be high, and since the washing machine is six years old, there may be problems with other parts.

So, when considering whether or not to make a repair, weigh the cost of the repair against the cost of buying a new washing machine and make a decision based on the actual situation.

If your Siemens Jianchang washing machine bucket is broken, you need to replace it with a new one. Generally speaking, the repairman can replace the bucket with a new one, but the cost can be high, and since the washing machine has been in use for six years, there may be problems with other parts. So, when considering whether or not to make a repair, weigh the cost of the repair against the cost of buying a new washing machine and make a decision based on the actual situation.

As soon as this washing machine in my house heats up, the electricity goes off.

As soon as the washing machine is heated, the electricity will be turned off, which may be due to the following reasons:1Circuit Fault:

There are problems with the circuit of the laundry machine, such as aging circuits, poor contact, etc. 2.Heater failure:

There is a problem with the heater of the washing machine, such as overload, damage, etc. 3.Line overload:

If you use other high-power household appliances (such as pins and air conditioners, microwave ovens, etc.) at the same time, it will cause the total line to be overloaded and trip. It is recommended that you check whether there are any of the above conditions first, and contact professional maintenance personnel in time for investigation and treatment. Before repairing, be sure to disconnect the power supply of the front bucket of the washing machine to ensure safety.