What does it mean when the gas meter shows S E N D 65

1. This is a common fault of the gas meter**.

2. E-10 indicates that the card type is not recognized by the table, and the card type is wrong or bad.

1. Gas meter.

The gas meter is a kind of gas flow meter, also known as gas meter, which is a compulsory verification measuring instrument listed in the national compulsory inspection catalog.

The use of gas meters by users must be qualified by the quality and technical supervision department for the first time.

2. Principle. A gas meter is a flow measurement instrument used to accumulate the total volume of gas flowing through a pipeline. There are two measuring boxes in the meter, each containing a volume of skin made of thin sheepskin or synthetic rubber soaked in oil.

When the gas flows through, the bladder expands and expands the gauge, thus changing the volume between the bladder and the metering box, and changing the position of the slide valve. When the left spool valve moves to the right, chamber A takes in air and chamber B discharges, the right spool valve is in the middle, and chambers C and D stop intake and exhaust. After the air intake of chamber A, the left spool valve moves left to the middle, and the right spool valve moves left, at this time, the air intake in chamber D, chamber C exhaust, and chamber A and B stop intake and exhaust.

Then the left spool valve moves to the left, and the right spool valve moves to the middle, at this time, the B chamber is intake, the A chamber is exhausted, and the C and D chambers stop the intake and exhaust. Then the left spool valve moves to the middle, the right spool valve moves to the right, at this time the C chamber is intake, the D chamber is exhausted, and the A and B chambers stop the intake and exhaust. In this way, the gas of the volume of two metering boxes is discharged in one cycle, and the crank swings once at the same time, driving the gear to rotate, and the rotation of the gear drives the counter.

The reading of the counter is the volume of the gas discharged.

The gas meter shows that the valve may be closed in the following situations: 1. The circuit board is damp and short-circuited. It is recommended to replace the gas meter.

2. If the battery is wrong, please replace the alkaline battery. 3. If the gas meter has been used for a period of time and the local humidity is high, you can wipe the battery contact points in the meter with sandpaper or metal objects. 1. Overpressure protection measures for household gas meters:

1) Adopt advanced imported pressure regulator with overpressure release and quick shut-off device. (2) Install a quick shut-off valve in front of the medium-low pressure regulator. (3) The double-circuit pressure regulator and quick shut-off valve system is adopted, which is composed of 2 pressure regulators and 2 quick shut-off valves.

4) Install an over-underpressure automatic shut-off valve in front of the household gas meter to replace the ball valve in front of the meter. 2. How to read the gas meter correctly: (1) The gas meter has an 8-digit word wheel, of which the first 5 digits are black word wheels, and the last 3 digits are red word wheels.

2) Among them, the black word wheel represents the whole number, the red word wheel represents the decimal number, and at the same time, there should also be a decimal point on the outermost nameplate. (3) If it is an IC card single LCD gas meter, most of these meters are IC card intelligent control meters and remote transmission meters, and most of them are integrated design. In order to facilitate debugging and reduce costs, an LCD panel is used instead of the original word wheel counter to display the readings.

The remaining gas volume in the card is displayed normally, and the cumulative gas volume in operation is displayed after the card is inserted.

What does it mean to display E-1007 on the gas meter.

Hello, glad to answer for you. E-4002E-1005, E-1006, E-1007, E-1009Note: Some IoT meters display "LO" on the screen, indicating that the power supply of the gas meter is insufficient and 4 No. 5 batteries need to be replaced.

When the gas shows the E1 mark, it means that the gas ignition has failed or the ignition has been turned off halfway. In this case, open the face cover of the water heater, turn on the water heater, and quietly observe whether the fire hole can make a spark, if there is no spark, it means that the ignition of the gas is damaged and the ignition needs to be replaced.

When the gas appears E1, it is not easy to ignite, it is likely that it is because of some reasons and parts are damaged, causing the gas to not ignite, in this case there will be an E1 logo, so in the process of replacement must improve the quality of gas parts, so as to ensure that its service life is not easy to damage.

How to deal with gas display e1.

In this case, it may also be because the water pipe is blocked due to dirt in the waterway, which will lead to excessive flow pressure, and when it is large to a certain extent, this situation will also occur, and when this happens, we need to dredge the pipe of the water pipe.

After dredging, if this sign still appears, it is recommended to immediately remove the scale in the water heater, and other stains, the dirt in the water heater will also appear after a long time of accumulation, even if the problem is solved, it needs to be cleaned regularly, so as to avoid this kind of thing from happening again.

The natural gas meter shows that E-07 means timed overflow.

It is recommended that you can change the gas meter or ask the maintenance personnel to repair it. 1. The gas valve is not opened or the diameter is too small.

2. The gas pressure is too small or the composition changes.

3. The ignition needle and thread fall off or burn.

Solution: 1. Open the gas valve or replace the large bore valve.

2. Find a gas company to adjust the gas composition.

3. Replace the ignition pin and lead.

4. Readjust the parameters of the main controller.

Extended Information: If the number does not appear on the natural gas meter, it is possible that the natural gas battery is dead.

The natural gas meter will alarm when there is still the last 5 cubic meters of gas left, and the natural gas meter will make a ticking sound. When the natural gas meter makes a sound, it is best to observe the natural gas meter, and if it is almost out of gas, you should quickly go to the bank or the natural gas company to pay for the natural gas.

For a natural gas meter with a battery installed, the numbers on the natural gas meter will not be displayed when the battery is not charged, and there will be no natural gas at the same time**. You can check whether the digital display of the natural gas meter is back to normal after replacing it with a suitable new battery. You can press the button on the top of the natural gas meter to check the amount of natural gas remaining and the amount of natural gas that has been used.

The presence of err07 on the gas meter indicates an error or malfunction.

Gas metering instruments include household meter series and G6, G10, G16, G25, G40, G65, G100 industrial meter series, as well as smart IC card gas meter, ** prepaid gas meter, direct reading intelligent remote meter series.

Outside the gas meter, you can only see a digital scroll wheel in the small glass window, and there are also seven digits on the wheel, the first four decimal places are black, and the last three digits are red.

Extended Information: Repair and Maintenance of Natural Gas Meters.

1. The product shall not be cleaned with strong salty, gasoline, alcohol and other solvents when used, and can be washed with neutral cleaning agents.

2. If the product fails, it should be reported to the management department in time, and it should be overhauled by professionals, and the user shall not disassemble it by himself.

3. Since the date of delivery, if there is a quality problem found within 18 months, the user shall abide by the relevant provisions in the manual, and the lead seal has not been moved.

The natural gas meter shows that E-07 is a fault**, and the meaning of the fault** of the natural gas meter is different for different manufacturers. So call in a professional to troubleshoot.

The gas meter shows E1006, which means that the gas battery is low and the No. 5 battery needs to be replaced.

The gas meter shows E-1006, and some models show lo, which means that the gas meter is not full of power, and if there is still an error after replacing the battery**, there may be a problem with the circuit. If you haven't opened an account yet, your gas meter may also show an E-1006 error**.

E-1006, insufficient gas meter battery; E-1007, contact maintenance personnel to replace the lithium battery or replace the table; E-4001, please wait 20 minutes before attempting communication.

If the gas meter does not work properly and there is no fault code, you can check it through the GPRS network, or contact the maintenance personnel directly.

Summary. Hello, the gas meter shows that the valve E-06 is closed abnormally because the meter does not match the card number, and it is not the user card of this meter. There are mainly external factors such as electromagnetic interference, air pressure fluctuations, temperature and humidity changes, and insufficient battery power supply; Of course, if the watch is broken, the valve will be closed.

When you hit the closing valve, first take the recharge card and re-swipe the meter, which will generally be fine. The second most common way is to pull out the battery, wait for two minutes and then reinstall it, and swipe the card again. The third is that it is time to replace the battery, some batteries have poor power supply, and batteries of different brands, models, and batch numbers can also be mixed here.

The natural gas meter card shows E-6

Hello, the gas meter shows that the valve E-06 is closed abnormally because the meter does not match the card number, and it is not the user card of this meter. There are mainly external factors such as electromagnetic interference, air pressure fluctuations, temperature and humidity changes, and insufficient battery power supply. Of course, if the watch is broken, the valve will be closed. When you hit the closing valve, please take the recharge card and swipe the meter again, it will generally be fine.

The second most common way is to pull out the battery, wait for two minutes to replace it again, and then swipe the card. The third is that it is time to replace the battery, some batteries have poor power supply, and batteries of different brands, models, and batch numbers can also be mixed here.

e-6？Natural gas shows E-6 which means that the effluent temperature is overheated, and the dry burn is protected. The reason is that the surface of the temperature measurement probe is seriously scaled and the temperature measurement response is sluggish.

The natural gas meter card shows E-6 and cannot be read on the card.

Hello, you can 1First of all, confirm whether the direction of the chip is correct when inserting the card 2Replug and unplug it a few times to see if the card is not in place to cause 3

To confirm whether the recharge in the card is successful, you can go to the business hall to check the recharge situation 4The chip is oxidized or there is dust, but wipe the core with a cloth and other items to indicate that the empty piece will try again. 5.

Common reading faults of gas meters** and the main reasons are:

Raid 1E01 Non-BAI system card Non-system issued card, DU manufacturer's logo does not match, ZHI or card insertion reversed;

2.e02 Write back card DAO error The new card logo is not written as the old card;

3.E03 IC Card Circuit Error IC Card Circuit Detection Error;

4.E04 Data Verification Error The data in the table is incorrect.

5.E05 Mismatch in the number of card purchases After the user purchases the card, it can only be used validly once, and after the purchase amount is read into the table, the card cannot be reused before recharging;

6.E06 User card, the table does not match the card number of the card Non-table user card (one table and one card);

7.e07 timed time overflow aThe table b. was not used for the set timeBase table gear damage cdamaged reed switch;

8.e08 Data Reading Verification Error Card reading data verification error;

9.E09 Old Card This card has been written as an old card;

10.e10 The card type is not recognized by the table This system card, the definition of the card type is wrong or the card is bad;

11.e11 Password Verification Error Card password verification error;

12.E12 Alarm Alarm External Alarm Alarm;

13.E13 Multiple Card Usage Error This table is not new, and multiple cards cannot be used.

The table does not match the card number, and it is not a Ben meter user card.

LCD display error**. Place the IC card.

Insert the deck while observing the LCD screen.

1-1 indicates circuit failure, 1-2 indicates control valve failure, 2-1 indicates that a metal conductive material is inserted, 2-2 indicates strong magnetic field interference, 3-1 card has been read, 3-2 is not the system card, 3-3 The input gas volume exceeds 9999 cubic meters, 3-4 is not the user card, 3-5 is withdrawn in advance, the valve is closed, and 3-6 is not cleared before opening an account.

Reasons why you can't use gas:

1.If the valve in front of the table is not opened, open the valve in front of the meter.

2.Gas appliances are faulty or the pipeline network is out of order, and the gas appliances are repaired or waiting for the gas supply to be restored.

3.If the card is not displayed and the IC card meter is faulty, notify the gas pipe elimination department for maintenance.

4.Close the valve when the gas volume is exhausted, and go to the gas department with the IC card to purchase gas.

5.due to electromagnetic interference.

Close the valve, press the query button or insert the user card to open the valve.

6.If you use an illegal card to close the valve more than 3 times, press the query button or insert the nuclear verification user card to open the valve.