How to look at the IC card gas meter, how to look at the IC card smart gas meter

Updated on technology 2024-03-25
4 answers
  1. Anonymous users2024-02-07

    1.Move the right side of the battery cover under the gas meter and open the battery cover.

    2.Insert the gas card face up, with the side with the metal chip facing inward, into the gas meter.

    3.The upper row shows how many cubic meters of natural gas was used, and the lower LCD shows the balance.

    The distinctive feature of C card gas meter is "pay first, then use gas", which fundamentally solves the shortcomings of traditional charging methods, and is favored by many families because it greatly facilitates the management department and users. The following is an introduction to this kind of gas meter and teach you how to see the balance of the IC card gas meter.

    Gas metering instruments include household meter series and G6, G10, G16, G25, G40, G65, G100 industrial meter series, as well as smart IC card gas meter, ** prepaid gas meter, direct reading intelligent remote meter series.

    Comparison of advantages and disadvantages.

    There are many advantages of the roller counter, but it has a big disadvantage, that is, when the high wheel is driven at the same time when carrying, it has to overcome a lot of frictional resistance. Gas meters can overcome this disadvantage due to their relatively large driving force.

    It is generally believed that the IC card gas meter represents the future development direction of pipeline gas billing management, so it is necessary to have a basic understanding of it and learn how to look at its balance.

  2. Anonymous users2024-02-06

    LCD.

    It is to show the IC card after you insert the card.

    on the balance. And your watch reading is to look at the mechanical wheel number, black is the cubic number, red is the decimal number!

    There are three ways to view it:

    1. If the table is installed with a query button, press this button to see it.

    2. Use your gas purchase card to insert the gas meter into the card slot in reverse.

    will prompt you, and you can see at this point.

    3. Power off. The power-off meter will not be written because the motherboard is not working, and the internal valves will also close at the same time. When you power it back on in a few minutes, you'll see how much you have left. At the same time, the motherboard works and the valve opens.

  3. Anonymous users2024-02-05

    Nowadays, many families are installing IC smart gas meters, and this kind of smart gas meters have an LCD screen, which is very convenient if we want to know the balance and gas consumption. Today, I will take you to understand how to look at the IC smart gas meter?

    1. How to look at the IC card smart gas meter.

    1. Under normal circumstances, the remaining gas volume and gas consumption in the meter will be displayed on the smart gas meter, and the user can read it directly through the LCD display core Zhenye display screen, we can see that the left side of the LCD screen will display the remaining two words, and on the right side, the remaining gas consumption will be seen, for example, the remaining gas consumption is cubic meters.

    You can set it to query how much gas has been used, and you can query it by switching the query button above, and you can also query the status of the gas meter, lead or electricity consumption, etc.

    2. Some IC card smart gas meters do not have the button function of query, we can remove the battery, and then replace it again, and then by reinserting the IC card, the remaining amount and the remaining gas consumption will be displayed.

    2. What aspects need to be paid attention to when using gas meters?

    1. If you don't use gas at home for a long time, you can remove the battery in the gas meter, generally speaking, there are 4 No. 5 batteries, which can avoid the battery from corroding the gas equipment.

    2. When the battery is insufficient, you need to replace it with a new one, and the display will prompt after 30 seconds. If you are using an IC gas meter, when the gas consumption is insufficient, it will beep to warn you and remind the user to recharge in time.

    3. When using IC card gas meter, you must protect the card at ordinary times, and you can't fold it at will, and you can't lose it, otherwise it will affect the use.

    4. When using the IC card gas meter, change the shouting if you need to press the button to query or insert the card, pay attention to the softer action to avoid excessive force.

    5. You should also pay attention to cleaning and maintenance, you can wipe it with a soft cloth, and pay attention to not flush it directly with water, or use some hard objects to scratch the gas meter.

    6. The gas IC card can only be used by individual families, if the IC card is lent, it will cause the heating meter to not work normally or will cause economic losses.

    Through the description, I believe that we have a deep understanding of how to see the balance and gas consumption of the smart IC card gas meter, and we should also pay attention to the maintenance of the gas meter in order to extend its service life.

  4. Anonymous users2024-02-04

    The IC card gas meter is divided into three areas, the area with rolling numbers is the amount of gas that has been used, the unit is cubic, the electronic screen display area is the remaining gas volume, and the bottom is the card area, and the card area is also the area where the battery is installed, and three No. 5 batteries need to be installed to use.

    Communication between the IC card and the reader can be contactless or contactless. According to the communication interface, IC cards are divided into contact IC cards, contactless ICs, and dual interface cards (with contact and contactless communication interfaces). The core of the IC card is the integrated circuit chip, which adopts modern advanced microelectronics technology, and its development and manufacturing technology is much more complex than that of magnetic cards.

    The main skills of IC card include hardware technology, software technology and related business technology.

    Zheng Congqi IC card has a wide range of applications, such as communication, security, medical, business, and identity recognition.

    Data development: The IC card charging system includes the collection of electricity, water, gas, communication, parking and other consumer fees, which can improve management efficiency and reliability. By charging in advance, it is possible to increase the available funds of the management department, provide high-quality services to residents, and change the unreasonable situation of consuming resources first and charging later.

Related questions
7 answers2024-03-25

The heat meter runs off the meter, and the flow rate represents how many cubic meters of water is used per hour. >>>More

13 answers2024-03-25

The method of checking the authenticity of the mobile phone is as follows: >>>More

12 answers2024-03-25

Visual acuity is usually divided into two categories: distance vision and near vision. Distance vision, mostly using the international standard eye chart, this table is composed of 14 lines of different sizes, different opening directions of the E word, measured from, each line has a mark. >>>More

30 answers2024-03-25

First of all, no matter what model of the single fee control energy meter, and the manufacturer's energy meter, the measurement principle of the single fee control energy meter is the same, and the energy meter has a memory inside, which can store 12 months of historical electricity. >>>More

7 answers2024-03-25

Generally speaking, it is not easy to see if there is a problem with a balance sheet alone. >>>More