What are the treatment methods for water pipe leakage in the wall? Describe specifically how to deal

1.First determine whether the water pipe is leaking: use an iron rod to follow the line of the water pipe, one end against the wall or the ground, and the other end on the ear, listen carefully, and generally you can find the leakage.

It may be a misjudgment caused by the high overflow level of the toilet and water tank, and the water secretly flowed away, and you didn't find it.

2.You can cut off the water source first, then remove the male and female nuts that connect the compression fittings, wrap several layers of thread sealant around the threads, and then reattach the fittings.

3.If a sleeve joint leaks, it may be necessary to remove the fitting and reinstall a lot of pipes, so you should report it to the repairman for repair.

4.No matter what kind of water pipe joint leaks, you can use the special adhesive tape to repair the water pipe for temporary repair.

The specific operation method is: first close the valve, cut off the water source, open the faucet to the appropriate position, to relieve most of the pressure in the water pipe, and then tie the leaking part with special adhesive tape, or seal it with ring gas resin adhesive.

The easiest and most direct way to leak water pipes in the wall is to find a property or renovation company to chisel the wall where the water pipe is leaking, find the water pipe leakage point, and repair it thoroughly to prevent further damage to the wall.

Water pipe leakage treatment method in the wall:

1. Inspection: There are water droplets on the wall is not necessarily caused by the leakage of the inner water pipe, then it should be judged whether there is a problem with the water pipe in the wall and the leakage situation, the specific operation method is to use a wire rod along the water pipe to follow the flow of the water pipe, while leaning against the wall, while sticking to the ear to listen carefully, this can not only clearly judge whether the water pipe in the wall is leaking but also understand the source of the water pipe leakage, as long as it is judged that the water pipe in the wall is leaking, you can find the material pipe to come to deal with it.

Second, measures: since the previous step to find the leakage point of the water pipe in the wall, then first of all, you have to close the main water source, and then remove the yin and yang nuts connected to the compression joint, wrap the adhesive tape on the nut to make the sealing performance of the nut better, and finally reinstall the compression joint, boiling water to see if there is water leakage, no is repaired, if there is still water leakage, you need to remove the compression joint and reinstall the water pipe, in this case, remember to act recklessly, should be reported to the repairman in time for maintenance.

3. Maintenance: In ordinary life, whether the water pipe in the wall is leaking or not, you can first use the special adhesive tape for repairing the water pipe to temporarily repair the leaking water pipe, and pay attention to cutting off the water source before operation; In addition, the waterway diagram of the room should be made at the end of the water pipe installation to facilitate future protection and maintenance.

1. Causes and treatment methods of leakage of exterior wall water pipes: If it is an exterior wall, it may be that the exterior wall paint is aging or cracked, resulting in rainwater infiltration of the exterior wall, which makes the wall in the room fall off by moisture. In this case, the property or professional company should be asked to repair the cracked part of the exterior wall, and the peeling part of the interior wall should be removed and repainted after drying.

2. The leakage of the embedded water pipe in the wall causes the dampness of the wall, which generally appears in the place near the bathroom, or the top surface, or the wall, and generally the embedded water pipe joint has leakage, which includes whether the water pipe in the wall of your home and your neighbor upstairs is leaking, and the water seeping into the partition wall. You can ask the people of the property to come and see, they have a house structure plan, ** there are water pipes are more clear. After finding it, connect the water pipe and redo the waterproofing.

How to leak water pipes: use waterproof tape, re-cut water pipes, and paste them with glue.

1. If it is only a slight water leakage, you can wrap it with waterproof tape several times at the joint of the water pipe, and it should be tighter; For the sake of safety, it can also be smeared with cement mortar on it to completely solve the water leakage problem.

2. But if the water leakage is more serious, you can re-cut the two sections of water pipe by cutting the method, and then paste it well, so that the effect is better than winding with tape, and the waterproof effect is more prominent.

3. If the water pipe has been ruptured, we need to find the ruptured place, if it is some small holes, we can find the leakage point by repairing the tire. After finding it, clean up the leakage, polish it with sandpaper, and paste it with PVC glue.

Causes of leaking water pipes

1. Water pipe joint leakage.

This situation is usually a relatively minor problem, even if it is not difficult to deal with, it is because the interface between the water pipe and the faucet is not well connected, as long as the interface is well connected, it is fine, it is not a big problem, and there is no need to ask maintenance personnel, you can solve it yourself.

2. The sewer pipe is blocked and leaking.

If the water pipe is hardened or there are foreign objects in the water pipe blocking the water pipe for a long time, it will cause the water pipe to be blocked, especially if there are some sundries in the sewer pipe in some kitchens, it will cause the water pipe to be blocked for a long time, and in serious cases, it will also lead to the water pipe leakage due to the rupture of the water pipe, and this problem can only be replaced.

First of all, the location of the water pipe leak is determined by the pressure of the water pipe. Then turn off the water source and dig the wall at the leaking point of the dark water pipe, and protect the furniture and floor. Cut off the leaking section of the pipe, cover the interface, align the new pipe with the interface, and then use a hot melter to connect the new pipe.

After connection, use waterproof glue to waterproof the pipe and pipe groove. Related information: 1. When there is a leakage of water pipes in the wall, it is necessary to find out the specific leakage point first, and then repair and deal with it.

And when encountering the leakage of the water pipe in the wall, it is necessary to turn off the water source in time, and the wall can not be arbitrarily damaged by the water, otherwise it will not only be more difficult to maintain for a long time, but also affect the health and decoration of the family. 2. After finding the correct leakage point, you can replace and repair the leaking pipe. First dig the wall of the leakage point of the dark water pipe, and pay attention to the finished product protection of the furniture floor when digging.

Then cut the damaged pipe, pay attention to the interface sleeve, and align the new pipe with the interface opening, and the direction should be straight. The new pipe is then hot-melted with a fuser. After the connection, use waterproof glue to waterproof the pipe and pipe groove, and the repair work is completed.

3. If it is a professional master, you can let the master use a press machine to suppress the detection, if it is determined that the water pipe in the wall is leaking, you can directly chisel the wall to find the water pipe leakage.

1. Check which section of the outlet pipe is leaking through the hydraulic test, or find the leakage: understand the direction of the water pipe according to the construction drawings to determine the leakage location.

2. Close the water inlet valve, which can avoid leakage all the time and facilitate maintenance.

3. Chisel the wall on the surface of the water pipe at the leakage until the water pipe is exposed, and it is best to dig more parts on both sides to facilitate operation.

4. Wipe the leakage of the water pipe to see the leakage, if there is only a hole with a large needle's eye, only use glass glue or AB glue to repair it. If it is cracked, you need to use a small hacksaw to see off this part of the water pipe, it is best to sawn off some more length, to avoid there will be spreading cracks inside, use sandpaper to polish the ports on both sides of the sawed flat smooth, and then use two joints to connect the new pipe to it, and apply glue to ensure that it is fastened.

5. The water pipe is repaired, the results are tested under pressure, and the surface layer is repaired with cement mortar, and the decorative layer of the wall is restored.