How to store and maintain electronic components? How to take care of electronics.

Anti-static when cleaning.

Clean the power bank and the charging port of the power bank regularly, and it is recommended to clean the power bank with an anti-static brush when cleaning.

Waterproof and moisture-proof. As an electronic product, accidentally falling into water or being exposed to humid air for a long time will cause varying degrees of corrosion or oxidation to the electronic components inside. Therefore, the power bank must be placed in a dry and cool place.

Drop and shock resistant. The power bank is actually a very fragile item, and the internal components cannot withstand beating. In particular, it is necessary to prevent accidental landing during use. Do not throw, knock, or drop the power bank. Rough-and-done power banks will destroy the circuit boards inside.

Protect against cold and heat. Do not put the power bank in a place where the temperature is too high, avoid exposing the power bank to sunlight for a long time, high temperature will shorten the life of electronic components, destroy the power bank, deform or melt some plastic parts, the storage temperature of the power bank can not exceed 45 degrees Celsius, otherwise it will affect the performance of the battery, shorten the service life of the battery and even cause danger.

Do not put the power bank in a super-cold place, when the power bank is working in a super-cold environment, when the internal temperature rises, moisture will form inside the power bank, causing a short circuit and destroying the circuit board.

Anti-harsh chemicals.

Not only should the power bank be kept away from water, but also remember not to use strong chemicals, cleaning agents or strong detergents to clean the power bank. To remove the appearance stains of the power bank, you can use cotton dipped in a small amount of anhydrous alcohol to clean.

Timed charge and discharge.

If the power bank is not used for a long time, it should be charged and discharged every once in a while to maintain its normal performance. It is best to charge and discharge the power bank once a month, so as to ensure the best state of the internal battery cell and effectively extend its service life.

The maintenance of electronic products includes the maintenance of the circuit board and the maintenance of the battery: 1. The maintenance of the circuit board is to minimize the bumps and falls that are easy to cause the circuit to be soldered, and try to keep the electronic products in a dry and normal temperature environment; 2. The maintenance of the battery is generally a lithium-ion battery.

Charge as you go, keep the battery at more than 20%!

I don't know which kind of digital product I am talking about, because each kind of digital product has different maintenance skills and frequency of use, such as some moisture-proof and dust-proof, and some are not. I'll give you an example of not being dustproof or waterproof.

For example, DSLR cameras.

His maintenance is relatively important, because the light source equipment involved in him is very small, and the glass lens group in his lens and the reflective lens in the body are very weak.

Therefore, almost all the machines need to be handled carefully. In order to avoid collisions, when the camera is not in use, you can use lens paper to remove the dust on the glass, do not replace it with a rag and hand, because it will accidentally leave irreparable scars, and you can match a UV lens on the lens cover.

It plays a dustproof role in the lens.

In addition, it is the problem of moisture, if you have more lenses and cameras, it is recommended to buy a moisture-proof box, which plays a role in cold, waterproof, dustproof and moisture-proof. Digital electronic products are consumable things, many of which are static, so they are very attached to a lot of dust, remember to clean the dust of the camera itself before putting it in the moisture-proof box. There is also a moisture-proof phase when the battery in the camera is taken out and put in.

Battery life, generally speaking, the quality and life of the original battery will be longer, but a battery with a SLR is definitely not enough.

Therefore, many times it is equipped with a battery from the factory, do not charge the battery overnight, it should stop charging when it is full, and remember to turn off the power before replacing the battery after the camera is out of power. Also, always pay attention to whether the external structure of the battery is deformed due to battery variation, and replace it immediately if found.

It is best to choose a place with clean air to replace the camera and lens when disconnecting and splicing, because it will be difficult to take care of dust if it flies in. The lifting and splicing actions should be gentle, so as not to break the interface.

Electronic products must be powered on once in a while, and cannot be powered off at will, because power failure has a great loss of electronic parts. 2

Keep it dry and don't come into contact with water, contact with moisture can cause necrosis of the circuit, and some components will be damaged after moisture!

Secondly, you must do internal cleaning and maintenance every month or two! For example, dust and oil stealing and its feces, etc., are the main culprits for damaging electronics!

The maintenance of electronic products includes the maintenance of the circuit board and the maintenance of the battery: 1. The maintenance of the circuit board is to minimize the bumps and falls that are easy to cause the circuit to be soldered, and try to keep the electronic products in a dry and normal temperature environment; 2. The maintenance of the battery is generally a lithium-ion battery, which can be charged at any time and kept at more than 20%!

Keep out of contact with moisture and keep dry