-
It should be caused by the inability to boot normally, and this English letter will appear. There are many reasons why the notebook cannot be turned on, including the corresponding fault phenomenon, and we can judge different fault causes according to different fault phenomena, so as to find the corresponding solution.
1.Phenomenon: After pressing the power on/off button, you can see the logo interface, and then you can't enter the system, the screen prompts to fix the computer or English error message, press F2 in the logo interface to enter the BIOS setting interface.
Cause: The system was compromised.
Solution: If you are using a pre-installed genuine Win7 system, it is recommended to restore the backup data in the logo interface by pressing Alt+F10 with one click; If you are not using a pre-installed system, it is recommended to back up your data and reinstall the system.
2.Phenomenon: After pressing the power on/off button, you can see the logo interface, and then you can't enter the system, the screen prompts an English error message, and pressing F2 on the logo interface can't enter the BIOS setting interface.
Cause: Failure of other hardware such as hard disks.
Solution: It is recommended to send the local service station for testing hardware. It's best not to turn on your laptop when switching between battery power and AC power.
That is, the battery is used until it is almost empty, and it is used after the shutdown and charging are completed. Otherwise, it is easy to be damaged. In your case:
1. The battery is exhausted and the system is shut down abnormally, resulting in the loss of system files, which is easy to occur in the XP system. It is recommended to reinstall the system. 2. It may be that the hard disk is damaged.
3. The BIOS settings do not match the hardware. When the battery runs out, the motherboard battery also runs out. The BIOS was restored to factory settings when it was turned on again.
If it weren't for the hardware upgrade and laptop use for more than two years, it wouldn't be a big problem. It is advisable to reinstall the system, if that doesn't work yet. It should be sent for after-sales maintenance.
-
This is generally when you turn on the computer by pressing F 8 9 10 11 one of these keys to enter the BIOS system you try.
-
If the boot device is not found, it is generally that the hard disk is not found or there is no system in the hard disk.
-
Note: Why did you start it on the Internet? Don't have a system locally?
-
Hello: The following methods are for your reference:
This situation is probably due to the loss of operating system files due to the installation of optimization software or anti-virus software, so the shutdown process cannot realize the access to the relevant files, so you restart. In this case, we recommend that you directly restore the factory operating system or reinstall the operating system.
-
Now according to what you said, you can't judge what the reason is.,It's recommended to go into the BIOS and turn off the boot logo.,Look at the information of its self-check.,What went wrong?,And then self-check according to this.,I can't do it well.,Just go to the maintenance point.。
-
Press F8 to go to safe mode to fully disinfect the virus, but it is not possible to configure the mode correctly for the last time when F8 is turned on.
-
According to what you said, you can't judge what the reason is, but it definitely has nothing to do with the battery, first of all, the BIOS turns off the boot logo, turn off the option of error checking at startup and try again, and the continuous restart is mostly the reason for the memory or hard disk, the black screen to the restart time period may be the memory or network card, and the long time may be the hard disk.
If you can enter the PE system. Fix the detection as above.
-
Try to see if you can enter the PE system. Fix the detection as above.
-
The disk with the operating system installed could not be found.
The hard drive is not plugged in.
There is no operating system installed in the hard drive.
The operating system is corrupted and needs to be reinstalled.
-
Invalid system hard disk.
Please replace the hard drive.
It is estimated that the hard disk is not installed.
-
It should be a problem with the hard disk, and it should be no problem to fix it with a professional tool, or reinstall the system.
-
Notebook computer (abbreviation: notebook, nb), also known as notebook, laptop or laptop computer in Chinese
A laptop computer is a small, portable personal computer that typically weighs 1-3 kg. The trend is to be smaller and lighter, but more powerful. Like Netbook, which is commonly known as netbook, the main difference from PC is that it is easy to carry, abbreviated"pc"。
1. Turn on or restart the computer, when the self-test screen or motherboard logo appears, press the F2 button quickly and continuously (different brands and models of computers have different BIOS hotkeys, notebooks are generally F2 keys, desktops are generally DEL keys) to enter the BIOS setting interface.
2. In the BIOS settings interface, enter the Boot (or Startups) tab and select the hard disk (displayed as HDD or specific hard disk model, SATA: PS-WDC WD5000AAKX in the figure below) as the first boot item by pressing the up and down arrow keys to select, press + or - keys to move the position, and then press Enter to confirm. Some old motherboards need to go to the Advanced BIOS Features tab, press Enter in the "1st Boot Device" section, and then select the hard disk.
Some new motherboards support pressing F12 or F11 to enter the boot options menu after booting, and you can directly select the hard disk to boot the computer without entering the BIOS interface (SATA-0 and SATA-1 in the figure below).
3. Press F10 to save and exit and restart the computer, which will boot directly from the hard disk into the system.
-
Hello, there are many possibilities when the English alphabet appears on the computer.
Hello, there are many possibilities when the English alphabet appears on the computer.
First, the computer cannot recognize the hard disk and cannot enter the system, and second, the computer cannot be booted in the wrong order and cannot be started.
You can start by shutting down and restarting your computer.
Press Del or F1 to enter the BIOS at startup, switch to the boot interface, select 1st boot device to press Enter, the Options dialog box pops up, and select Hard Drive Enter to confirm.
Select Hard Disk Drives Enter to enter the settings, select 1st Drive Enter, and select SATA hard disk item, which means that the hard disk is set as the first boot item, press F10 Enter to save.
Just reboot it.
-
It can't be a hardware problem, it's recommended, just find the nearest master to see.
-
In the startup menu in the BIOS, you select the boot device order is network, hard disk, U disk, so it will first find out if there is an Internet café boot disk, if not, use the hard disk to boot, just boot the hard disk in advance to the network boot on the line.
-
The boot device is selected incorrectly, and the network card is booted in front of the hard disk.
studio13 is good Its configuration is much better than studio14, that is, the screen is smaller, but the performance is much stronger, and it is more convenient to carry, studio14 plastic feeling is too strong, 13 metal feeling is good.
Screen cable components account for more than 90% of such failures. >>>More
Summary. The solution to the Dell laptop with a black screen and 7 consecutive alarms is as follows: >>>More
This is nothing more than a software or hardware problem, right, let's take a look. Start with the software, that is, the driver, re-follow the driver's camera, use the driver life or the driver wizard to update the driver, if not, go to the official website** to see, Lenovo will go to the Lenovo official website, Dell will go to Dell**, the camera's camera is similar to the driver. If you can't do it, ask the service people of those brands, and ask **. >>>More
Hello, it is recommended that you buy from the official website, under the premise of ensuring better quality, ** will be more favorable. Dell has always been based on the official website direct sales model, and there is still a difference in configuration from the computers sold by dealers. Factory direct sales are produced with better raw materials after the customer buys, and it is impossible for dealers to customize the production. >>>More