Is there a crack in the paint on the door of the fuse?

The field is painted until a complete, smooth surface is exposed, then repainted. Regular waxing and regular maintenance can also alleviate or even avoid this condition.

Car paint is what many of our car friends pay more attention to, especially for some new cars, if the car paint is not well maintained, it is easy to reduce the service life of our car paint. If you don't take some necessary care of your car's paint surface, metallic paint can cause a very fine crack.

It will continue to penetrate the paint until it "breaks through" the entire layer of paint, a phenomenon called "cracking" and very unsightly. This generally happens on metallic paints. The crack is difficult to detect with the naked eye at the beginning, but it is more serious when it is visible to the naked eye.

Under the irradiation of the sun's ultraviolet rays, the paint film continuously evaporates oil into the air to protect itself. Over time, the oil content of the paint surface will be too dispersed. The brightness and depth of the paint surface are greatly reduced, so that the paint surface slowly whitens, forming an oxide layer, and shortening the life of the paint.

Whether the vehicle is insured with paint scratch insurance.

When the vehicle is only scratched by the paint and there are no potholes, you need to take separate paint scratch insurance, but you must ensure that your vehicle has purchased this additional insurance when buying car insurance.

Take the insurance along with other injured parts of the vehicle.

When taking insurance (the vehicle has bought scratch insurance), if the vehicle has other scratches, or not obvious collisions, it is recommended to take insurance with this scratch insurance, and it is generally okay to discuss with the claims adjuster, and you can just say that it happened once.

Having said so much, thank you friends!

One is to wipe carefully with a wet towel, some small marks may be wiped off, but this situation is often aimed at very small scars, and the actual situation that can be used is relatively small The second is waxing, the owner can choose to remove the slight scratches of the car wax to deal with it, its effect will be more obvious.

Hello The solution to cracks in car paint is as follows:

1.Re-paint the crack area until a complete, smooth surface is exposed;

2.If the degree of crack in the car paint is light, waxing is sufficient. If the degree of crack in the paint surface of the car is serious, respray the paint on the car to improve the overall aesthetics and enhance the protection ability of the car;

3.Cracks in car paint can be treated by grinding and polishing, and after grinding and polishing, the vehicle can be temporarily restored to color.

Hello, for this situation, it is likely to be caused by the aging of the car paint, this is recommended to go to the repair shop or car beauty shop to do a polishing, generally can be repaired.

Now it is divided into 2 situations, 1 bottom, that is, after the paint cracks, you can see the coating or substrate at the bottom, and this kind of situation needs to be repaired in a professional place! 2.If you don't see the bottom, the paint is cracked or the primary color, and you only need to buy some wax and polish in this kind of situation!

Cracks in the paint after spraying paint are mostly due to poor craftsmanship or cutting corners.

Suggestion: Use a grinder to thoroughly polish the cracked area and spray the primer, then polish and apply the topcoat, varnish and polish.

You can go to the car repair place and just fix it.

Of course, it can be repaired, this sheet metal spray paint is about 500 yuan, it can be repaired in two to three days, the insurance depends on whether you have been out of insurance, you have reported it, you have not reported it, you have reported that you have paid a few hundred, and it will rise to a few hundred in the coming year, which is of little significance.

The door of the car is concave, and there is a little crack, a little bigger than a fist, this can be repaired, you need to do sheet metal and painting, it can be done in a day or so, mainly when the paint is dry. The cost is around 300 yuan. It's not cost-effective to take insurance, so pay for it yourself.

It's okay to just fix the depression, but if it's cracked, it can't be repaired, and you have to change the door. If the insurance company reported the case at that time, you can go to insurance.

Hello, it can be fixed. You can go to the 4S shop and see how much he says it will cost to repair. If you don't have to pay 500 yuan, you can do it yourself. More contact insurance.

If you drive at night without turning on your lights, you will generally not be fined, but if you are found by the traffic police, you may face an administrative penalty of warning or a fine of between 20 yuan and 200 yuan, and 1 point.

Because there is currently no electronic police capture equipment specifically for this behavior, the traffic police will only remind or warn at most if they encounter it, and will not be punished.

However, there are penalties for this in traffic regulations:

Anyone who drives a motor vehicle and does not use lights in accordance with the regulations shall be given a warning or a fine of not less than 20 yuan but not more than 200 yuan, and 1 point shall be deducted.

The door is marked, and the repair needs to be taken care of. First of all, it is necessary to look at the sheet metal welding treatment, and secondly, whether to operate according to the sheet metal spraying process six times, if it is handled well, it will not crack without external force, I hope it can help you, thank you!

If the rear bumper of the car is broken, the car will not be inspected.

Among them, the exterior inspection before starting needs to check the flatness of the body: check the flatness of the steel plate and bumper of the body, and there should be no abnormal depression and bulge. The anti-scuff strip and decorative line of the car body should be straight, the transition should be smooth, and the gap at the interface should be consistent.

It is also necessary to check whether the door gaps are uniform (some of the gaps are large and some are small, and some of the front covers are asymmetrical gaps on both sides), whether the door opening is flexible, whether the paint surface is scratched, whether there is rust on the corner edges, etc. It can be seen that the bumper is broken, which is not given to the inspection of the car.

You can pass, because it does not directly affect the usability, does not cause direct and indirect safety hazards can be passed, and then to check the car is generally to check the vehicle exhaust emission content, braking performance, whether the connection of the chassis is broken, sprained, the traffic police in the last stamp of the driving license annual seal, will open the nose cover to check whether the car is modified, such as turbocharging, engine and gearbox have not replaced non-standard, and then check whether it is pasted with reflective film and non-original xenon headlights, will not care about the appearance of your body, But if it is super damaged, such as a big hole in the door and front and rear bars, it will definitely be reviewed after you deal with it. No one cares about minor problems.

Being able to inspect a car is nothing more than checking the brakes, lights, reversing lights, 、、、 and so on.

The bumper should not be damaged.

I can inspect the car, and the upstairs is right.

Yes, the sheet metal painting will be repaired.

Sheet metal painting is a kind of car repair technology, that is, the deformed part of the metal shell of the car is repaired, such as the body shell is hit by a pit, you can restore it to its original state through sheet metal, and then through spraying special paint, the deformed metal surface of the car is restored to the same as other intact places, as bright as ever.

Is it possible to fix it, do you take a closer look at your car paint is really off? Or hit your other car paint left on your body, scratches are not too obvious, there is no need to repair, the repair paint is different from the original car paint! Go to the car wash and take a look at the blackened parts of the car.

Yes, the concave place can be topped out about 50, and the paint can be resprayed on one side about 300 to 400, which is different in each place.

You go to the 4S store and ask, it should be able to be repaired.

1. First of all, remove the entire bumper and find the location that needs to be repaired.

3. Use a plastic welding torch to heat and weld along the crack.

4. Finally, you only need to wait for the temperature to return to the normal value.

1. Remove the entire bumper and find the location that needs to be repaired.

3. Heating and welding along the crack.

4. Finally, you only need to wait for the temperature to return to the normal value.

Bumper protection.

1. Use the corner indicator column to judge the position of the bumper.

The markings erected at the corners of the bumper are indicator columns, and some companies have models that automatically expand and contract with the motor drive. This kind of corner indicator post can correctly confirm the position of the bumper corner, prevent damage to the bumper, improve driving skills, and if you are often prone to abrasion on the bumper, it is best to install one and give it a try. With this corner marker, you can correctly judge the position of the bumper from the driver's seat, which is very convenient.

Second, the installation of corner rubber can reduce the damage to the bumper.

The corners of the bumper are the most easily damaged parts of the car's shell, and people who don't feel good about driving tend to rub the corners and get scars all over the place. This part is protected by corner rubber, which can be attached to the corner of the bumper, and it is very easy to install. This can reduce the extent of damage to the bumper.

Of course, if the rubber is bruised, it is enough to replace it with a new one. In addition, the corner rubber is a thick rubber pad that is attached to the corners of the bumper, and if you want to look integral to the body, you can spray paint.

Of all the exterior parts of a car, the front and rear bumpers are the most vulnerable to damage. If the bumper is badly deformed or shattered, it can only be replaced. But in general, if the bumper is only slightly knocked out of shape, or there is a not very serious crack, there is a way to repair it without replacing it.

The cracking repair process is as follows:

First, remove the bumper and identify the location that needs to be repaired.

2.The back side of the crack is heat-welded with a plastic welding torch.

3.While heating the plastic electrode, move along the crack.

4.After welding, the repair can be completed by waiting for the temperature to drop.

The bumper does not come.

Yes, all sources of the situation can be repaired.

Complex. Holes and so on

If the damage is larger, it cannot be repaired; Bumpers, such as ramps, that are less damaged than DAOs and are damaged in a straight line, can be repaired.

Specific steps for repair:

1. Remove the bumper. 2. Remove the bumper attachment. 3. Use repair plastic strips and plastic welding guns for repair. 4. Polishing the repaired bumper. 5. Re-paint. 6. The installation accessories can be installed.

The rupture area is not small, if you spend your own money, you can repair it, you can do a welding, and then spray paint, it will cost more than 100 yuan. What kind of car are you, if it is a van like Wuling, it is good to change it, and the ordinary front bar is free of paint, which is about 100 yuan.

Looking at the shape and hard cracks of the front bar of your car, it is likely to be a van or a pickup truck, and the bar is not worth much, so it is better to replace it.

It cannot be repaired, and if you want to use it, you can use it with a wire piercing and suturing.

1.Remove the screws and buckles that hold the bumper in place, and remove the bumper and place it on the ground.

2.Plug the soldering iron in, then go back to the place where the soldering iron is cracked and align it with your hands, and wait for the soldering iron to heat up and ,..

3.After fixing, attach the bumper to the vehicle and adjust the gap between the bumper and the body.

4.Paste a protective film around the bumper, then smooth the welded parts with sandpaper, paste putty ash, and wait for the ,.. to dry

5.After drying, spray the car paint, wait for the car paint to dry, and then tear off the protective film around it, and the crack is perfectly solved. end

No. If you spray paint, it will be treated, and you will remove the original one and make a new one.

It is good to dispose of the original primer and re-spray, it is recommended that the quality of the 4S shop is more reliable, but it is a little expensive, if you can take insurance.

If it really cracks, you must polish off the original paint and re-spray it, and you can't keep it.

The paint is baked. You layman doesn't understand anything.