How to make beeswax and how to refine beeswax

Here's how beeswax is made:1. When boiling beeswax, waxing is the most important step, waxing is to put the prepared beeswax or the old honeycomb into the cauldron of melting wax, and then add a small amount of water, and wait for all the components of the beeswax to be liquid, pour it into a tank that can keep warm, add part of the hot water, and after a period of time, the impurities in the beeswax will sink to the bottom of the water, and the wax liquid on it can be taken out for later use.

2. Prepare the wax plate, keep the temperature of the beeswax melt at about 70 degrees, and then pour the beeswax liquid on the wax plate, and soak the wax plate in cold water after the beeswax solidifies, so that the beeswax flakes inside are separated from the wooden mold to obtain natural beeswax flakes.

3. If you don't want beeswax tablets, you can also prepare a special mold according to your own needs, pour the beeswax liquid into the mold, and wait for it to completely solidify, you can take it out and make beeswax blocks with different shapes.

The steps of beeswax refining: honeycomb add water to heat in the pot, prepare the filter screen, wait for solidification, filter impurities, pour into the container, and demould.

1. Add water to the honeycomb and pour it into the pot to heat, the amount of water is not proportional, and the stool can be closed at one point, anyway, it will still be separated later.

2. Heat to boiling, prepare a filter screen, spread a layer of gauze with a higher density for filtration (sold in pharmacies), use two chopsticks to stand on a small basin, put a filter on top of the chopsticks, and pour in the boiling beeswax liquid. When it cools, it will turn into wax directly, so keep it hot.

3. Let stand for a while and wait for solidification. If you put it in a cooler place, it will solidify quickly, and if you are not in a hurry, you can leave it overnight. The water and wax will be separated, the surface wax will be removed, and the water will be poured out.

4. Put the wax directly into a clean pot and heat it without adding water, and then add a filter gauze with high density to the previous steps of the jujube crack. This gauze can be spread in the filter screen in step 2, and smaller impurities will be filtered out.

5. Pour into the container you want it to shape, and it would be best if there is a tool for easy demoulding.

6. In the winter of the Northeast, it takes about an hour to dry (open the window) and it will take shape. Half an hour is left to demold and tear off the paper on the wax surface, leaving no scraps of paper.

Tips:

After the beeswax melts, be careful not to burn your hands when pouring it into the container.

Materials: firewood, water, beehive, pot, spoon.

1. Heat the pot over high heat.

2. Pour 200g of water into the pot.

3. Heat for 3 minutes.

4. Put 500g of beehives into the pot.

5. Control the fire at a low level.

6. Use the heat of water to start boiling the honeycomb.

7. Stay up until you can't see the beehive.

8. Pour the filtered beeswax into the basin.

9. Scoop off the surface residue.

10. Wait for the beeswax to solidify and cool down.

11. There are ripples on the surface of natural beeswax, and beeswax can be obtained after solidification.

The beeswax boiling method is as follows:

Prepare materials: honeycomb, water.

1. Heat the pot over high heat, pour 200g of water into the pot and heat for 3 minutes.

2. Put 500g of honeycomb into the pot.

3. Control the fire at a low level.

4. Use the heat of water to start boiling the hive.

5. Stay up until you can't see the beehive.

6. Pour the filtered beeswax into the basin.

7. Scoop off the surface residue.

8. Wait for the beeswax to solidify and cool down.

9. There are ripples on the surface of natural beeswax, and beeswax can be obtained after solidification.

Many friends don't know how beeswax comes from, in fact, boiling beeswax is so simple.

1. Step 1: Heat the pan over high heat.

2. Step 2: Pour 200 grams of water into the pot.

3. Step 3: Heat for 3 minutes.

4. Step 4: Put 500 grams of beehives in the pot.

5. Step 5: Put it on a low heat.

6. Step 6: Start boiling the beehive with the heat of water.

7. Step 7: Until the hive is out of sight.

8. Step 8: Pour the filtered beeswax into a bowl.

9. Step 9: Dig out the residue on the surface.

10. Step 10: Wait for the beeswax to solidify and cool.

11. Step 11: The surface of natural beeswax is wavy, and it can be obtained after curing.

How to boil beeswax in the hive teaches you a trick without filtering, boiling beeswax method.

The collection of beeswax is mostly done in spring and autumn. Beekeepers by strengthening the management of bee colony, promote bees to secrete more wax, more spleen, and then use the old nest spleen, build the spleen, cut off the wax cover of the beehive, the base and the honey cover cut when shaking the honey collection, after manual extraction, generally the honey after the honey is removed, put into the water pot to heat and melt, remove the upper layer of cocoons, bee corpses, foam and other impurities, filter while hot, let cool, beeswax will condense into a block, float on the water surface, take out, that is, yellow wax. Yellow wax is then smelted, decolorized and other processing processes to become white wax.

The steps of how to make beeswax are as follows:

Prepare materials: beeswax, soup bags, gauze, etc.

1. Buy a honeycomb without honey, if there is honey, use gauze to remove the honey, add twice the water to the honeycomb and boil until the honeycomb melts.

2. Use a disposable soup bag to pass the slag, and when it cools, the beeswax will solidify on it. Letter.

3. Take out the beeswax, if the amount is large, you can use a basin to heat and melt, and then wait for it to cool and cut into pieces and store it at room temperature. Due to the small amount of cooking, Dantan feast is heated and kneaded into a ball.

Precautions

1. Safe operation: The melting process of beeswax requires the use of heat source, please ensure safe operation to avoid accidents caused by fire source or high temperature. When using a double-walled pot for melting, make sure there is the right amount of water in the bottom pot so that the honeycomb doesn't overheat or burn.

2. Material selection: choose fresh and clean honeycombs for production. Avoid using contaminated or odorous hives.

3. Filtration step: Filtering honeycomb residue or impurities through a fine mesh can ensure the purity of beeswax. Use a suitable filter tool for filtration, such as gauze or a strainer. This results in beeswax with better quality mold silver.

4. Storage method: pour the filtered beeswax into a clean container and wait for it to cool and solidify. When storing beeswax, choose a well-sealed container and place it in a cool, dry place away from direct sunlight and exposure to high temperatures.

Prepare materials: Before boiling beeswax, you should prepare tools and raw materials, the most important raw materials are honeycombs, tools include pots, suitable molds, and fine gauze.

1. Put the prepared crushed beehive in a pot, add a small amount of water, then start heating, after boiling, slowly cook for a while over low heat, so that all the wax in the honeycomb melts into the water;

2. After boiling, prepare a basin, filter the boiled liquid with fine gauze, remove the honeycomb fragments inside, and then wait for the liquid and water in the basin to cool down naturally, and the water and beeswax can be separated naturally after cooling;

3. Take out the separated beeswax, put it in the pot for the second time and then boil it, and after the beeswax is all melted, pour it directly into the prepared mold, and wait for the beeswax to cool down and set, you can take it out of the mold, and the beeswax block made by yourself will appear, which is particularly convenient no matter how you use it.

It should be noted that when boiling beeswax, adding a little less water will not affect the purity of beeswax, on the contrary, it is easier to remove the water-soluble impurities in the beeswax, so that the purity of the beeswax is higher.