When repairing a car, are the original parts necessarily better than the analogue?

Generally, when we go to repair the car, we will tell the car repairer to replace the best accessories, so what is the best accessories? Generally speaking, it must be the original parts that are best, right, so many people choose to use the original parts. But there are also people who choose to use analogue accessories in order to save some money.

Then some people have questions, what is the difference between the original accessories and the accessories of the auxiliary factory? What's the difference in using it? Today I'm going to tell you about the difference between the two.

Now, there are a lot of black-hearted merchants. It's not estimated to go to the black repair shop, but there must be this kind of existence, take the auxiliary parts to sell you with the original parts, and fool you with the idea that you don't understand what accessories to change on it anyway, so there are many whites who will be deceived. I'll tell you how to distinguish between original parts and analogues.

Original parts are produced with the manufacturer's logo, which is generally produced by the automobile manufacturer or has been authorized by the automobile manufacturer. The parts produced are certified by the main engine factory, so they also have the manufacturer's logo. When you inspect the car, see if there is the manufacturer's logo on this accessory, generally there are original parts.

No, or the logo is not clear, the dirty one may be the analogue. Therefore, this can be used as a reference for inspection during the car inspection. If the parts replaced in the 4S shop generally do not need to worry about whether they are auxiliary parts, the 4S shop is the most secure.

But the same is that ** will also be higher.

What is the difference between original and analogue? In fact, you don't have to think about it, the original factory is better than the deputy factory. Compared with the original factory and the auxiliary factory, the quality, performance, and matching degree are very high.

But ** is also about twice as high as the deputy factory. However, the general original parts can only be replaced by 4S stores, because they are not sold to the outside world. Unless you can't see the light.

So if you're out repairing a car, and the master swears to you that it's the original parts, you have to think about it.

In fact, not only quality, performance, and matching degree are stronger than those of the deputy factory. After-sales service is also very in place. As mentioned above, the original parts can only be replaced in the 4S store, so every time you replace the parts in the 4S store, there is a record.

If there is a problem with the above in the later stage, you can go to it to solve it with this record, and if you replace the analogue accessories outside, you will not have this treatment.

Usually the original is good, but not absolutely.

The original parts are indeed a little more reliable.

This is generally true, the original will be more suitable.

Not necessarily, the quality of the analogues is also good.

Indeed, the original parts are better than the ones of the analogue.

In principle, it's better.

What is the difference between original parts and analogues when repairing a car? I will explain it thoroughly to you at one time, and I am not afraid of being pitted.

This depends on the quality of the specific accessories, and no conclusions can be made.

Not necessarily, but the original factory should be a little better.

I can't say that, it still depends on the level of production.

Not necessarily, it depends on their workmanship.

I believe that many people, in real life, will encounter vehicle breakdown problems when using vehicles. In general, the vehicle failure may be caused by a problem with the parts, so at this time. The corresponding parts need to be replaced.

So when we go to the 4S shop to repair the car, how can we judge whether the parts are original or sub-factory? In fact, with the development of society. The popularization of science, for the identification of this aspect, is also relatively simple, most accessories.

He has an anti-counterfeiting code, we only need to scan the code, you can determine his channel, and be able to distinguish its authenticity, so it is very simple, I hope you can pay attention, because for us, if there is a problem with the accessories. So the impact is very big, what is the impact, let's take a brief look at it together? <>

The first is the assembly mismatch, which is the simplest and most direct effect. That's the assembly mismatch. We know because the automotive market is in very high demand.

So for this kind of accessory, we have a wide range of options. There are various brands, this kind of thing, his brand is different, and the quality is also uneven, so, when assembling. Maybe because of different brands, the assembly does not match, resulting in a very big problem?

The second is the issue of compatibility. We know that the car is through various systems, together to provide work, therefore, for each component and each system, there are strict requirements, if a replacement of an accessory, but the accessory can not meet the standard requirements, then there may be compatibility problems, and directly affect the work of the entire car. <>

Therefore, I hope that everyone can pay attention to it, because for such an impact, we cannot afford it, and his loss is very large, so only if we pay attention to it, can we avoid it, and can we really reduce the impact and trouble in this regard. So, everyone must take it seriously.

First of all, we must look at the packaging, the general original packaging is very standardized, and the standard is also unified, the handwriting is particularly clear, the accessories packaging of the auxiliary factory is very poor, and the details are particularly bad, look at the process of the original factory is very exquisite, the appearance is also very good, the sealing is particularly good, and some inferior products, its process is particularly poor, you can also see the joint, the general original factory is very tight, and the inferior ones are generally particularly easy to have seams.

Hello dear, I am inquiring for you here, please wait a while, I will reply to you immediately

Hello, the result of your inquiry here is: 1. Original parts: original parts refer to the auto parts produced by the parts factory directly authorized by the automobile manufacturer.

The products and packaging are uniformly using the trademark logo of the automobile manufacturer, and the product parameters and the manufacturer's ** address will be indicated on the packaging. It should be noted here that the original parts are only circulated in the sales system of the automobile manufacturer, such as the brand 4S store of the vehicle manufacturer, or the directly authorized special dealer. 2. Analogues:

Analogue parts refer to auto parts produced by parts factories that have not been authorized by automobile manufacturers. The products and packaging are uniformly using the trademark logo of the automobile manufacturer, and the product parameters and the manufacturer's ** address will be indicated on the packaging. It should be noted here that the original parts are only circulated in the sales system of the automobile manufacturer, such as the brand 4S store of the vehicle manufacturer, or the directly authorized special dealer.

It can be judged by the trademark on the accessories and the date of production, because the original accessories have the logo of the original factory on them, and the logo of the auxiliary parts and the original accessories are different.

We can tell the staff in the store that we will inspect the goods after they arrive, and there is a part number on the package, and we can check this part by the number.

It is impossible for the outside auto repair shop to get the original parts, and the original parts are directly supplied and distributed by the 4S store.

Get it in the repair shop outside, at most it is a high-imitation accessories, and moreover, the insurance company will assess the damage, and it will not give the ** of the 4S shop outside. Therefore, it is impossible for the repair shop to get you the original parts.

An auto repair shop is a unit specializing in the repair of automobiles and assemblies, which is generally located inside the bus station, and there are also separate enterprises. The basic methods of automobile repair can be divided into on-the-spot car repair and assembly interchange repair.

Automobile repair refers to the regular vehicle cleaning, parts inspection and lubrication, as well as the replacement and maintenance of damaged parts, etc., the main purpose is to effectively ensure the working effect and good technical condition of the car, avoid the failure caused by the loss of parts, and provide a good guarantee for people's travel safety and traffic safety.

I will choose to change the auxiliary factory, because the auxiliary factory is relatively cheap, and their degree of solidity and other aspects are about the same, and there is not much error, the only difference is that when you change the car, the original factory may be more expensive than the deputy factory, which is easier for others to accept.

When changing auto parts, I will choose to change the original parts, because the quality is better, and the size is more appropriate, the difference between them is that the service life and size are not the same, and the service life of the analogues is short.

Replace the original parts, there will be no more problems in the future, and it will be better for the car. It is also very consistent with the car model. If you change the sub-manufacturer, then it is not quite in line with your own car.

In life, it may be often repaired, and the quality is not particularly passable, and there will often be some damage, so you should choose the original parts, now than higher quality is better. The service life will also be longer.

Hello, look at what accessories to change Accessories that do not affect safety and performance can be considered by the analogue.

We call vehicle manufacturers automobile manufacturers, and some automobile manufacturers are more technical and can produce most of the key components on the car. However, there are also some car manufacturers whose technology is relatively not so good, and some key components on the vehicle, even the three major parts, cannot be made by virtue of their own level. Many people think that the original parts of the vehicle are the original parts of the vehicle manufacturer, but they are not.

When the automobile manufacturer outsources some parts of the single core part or even some key parts later, it <>

Automobile manufacturers will look for dealers to produce and manufacture such outsourced components. However, after the dealer has finished producing the components of the car company, he should not affix his own trademark on the product, but should affix the trademark of the automobile manufacturer, and we call this kind of parts original parts. Genuine parts:

It is the spare parts produced by the standard manufacturer, which is not necessarily manufactured by the original vehicle factory, but as long as there is the name of the manufacturer, the brand of the product and the production address, and the certificate of conformity, it can be regarded as genuine parts.

Refurbished parts: mainly used in second-hand accident cars, or scrapped car parts. The way process of refurbished parts is the general second-hand accident car according to the commercial insurance company International Auction Second-hand accident car customer The whole car is disassembled and then enters the spare parts sales market, this kind of spare parts, there is no problem to become the dismantling of the car parts, and some of the older or problematic parts will be sold to small processing plants and manufacturers without safety precautions to carry out refurbishment.

Most of the refurbished parts have major safety hazards and equipment failure rates, it is best not to buy a unified application of their own trademark logo, and the outer packaging will also indicate the technical parameters and the production company's best location.

The difference between the characteristics of original parts and by-factory parts: The origin is different: original parts are generally second-class spare parts dealers designated by automobile manufacturers.

In order to distinguish such parts from factory parts, there is usually a mark. Original Equipment Manufacturer or Original Equipment Manufacturer Distributor. Some parts do not need to be reviewed by automobile manufacturers, but parts manufacturers can produce and sell them themselves, which is more complicated; Spread:

Generally, the original parts** will be 10% to 20% higher than the market channel, and the price of factory parts is relatively low; The quality and degree of integration are different: the quality and integration level of original parts are very high, while the quality and integration level of analogues are the opposite.

It is the difference between the original parts and the most expensive, the genuine parts in the middle, and the analogues are the cheapest.

The difference lies in the quality, and the quality ranking is that the original parts are greater than the original parts, and the original parts are greater than the analogues.

The quality of the original parts is the highest, the adaptability is also the best, and the quality of the genuine parts is also more guaranteed, but after all, it is not the original Shenyuan customization, and it may be almost interesting in terms of adaptability.