How do you determine the distance between the wheels and the edge of the road during the 3rd exam?

It's best not to step on the line, because it's all smart detection.

You can tell by the mirrors and the front of the car.

It is judged by the distance between the front of the car and the rearview mirror.

You can tell the distance by the front of the car.

This still depends on the feeling, and there is also the habit of practicing the car.

About a third of the way up the front locomotive canopy.

It depends on how well you practice.

You can tell what the distance is from the front and rear mirrors.

This one. I think it's important to set the spot, we look at the wipers.

The body of the body, all the cases of finding the edge line are within 30 cm of the distance from the body.

1. Subject 3, also known as road safety driving test, is a part of the motor vehicle driver's license assessment, and is the abbreviation of road driving skills and safe and civilized driving knowledge test subjects in the motor vehicle driver test. The content of the road driving skills test is different for different types of prospective vehicles.

2. The three main test contents of the driver's license subject: preparation for getting on the bus, starting, driving in a straight line, changing lanes, passing the intersection, pulling over, passing the pedestrian crossing line, passing the school area, passing the bus stop, meeting the car, overtaking, making a U-turn, and driving at night. The traffic management department of the provincial-level public security organ may, according to the actual situation in each locality, increase the test items of the quasi-driving type of automobiles, and determine the test items of other quasi-driving types.

It depends on how your coach teaches you.

The details of Subject 3 have always been a concern for students. Whether in a driving test or in everyday driving, it is very important to determine the distance of the right wheel from the curb by 10cm.

1.Revolver position judgment.

Judging that the left wheel will be pressed to **, you can avoid the tires pressing to the solid line, or avoid potholes and stones on the road. When our line of sight coincides with an object on the ground through the raised hail node of the left wiper, our left wheel will be pressed against the object while driving.

When the wiper node coincides with the ground centerline, the tire will be pressed against the centerline.

2.Travel distance 60 cm from the centerline.

It is safer to be 60 cm away from the centerline for daily driving. When our line of sight coincides with the centerline through the intersection of the panel and the A-pillar, the body is exactly 60 cm from the centerline.

3.Determine the position of the right wheel.

When our line of sight crosses the target through the right wiper, the tires cross the target.

When the wiper node coincides with the ground centerline, the tire will cross the centerline.

4.Drive 60 cm from the right side of the road.

When the right-hand sprinkler overlaps with a roadside target, the body is 60 cm from the roadside.

5.Park on the right.

When the node of the right wiper overlaps the curb with the curb, pull slightly to the left to pull more than 10 cm away from the curb.

It is very important for the driver to judge that the right wheel is 10cm away from the curb, and the same is true for the driver's license. After all, if the wheel is pressed, it will fail directly.

The distance between the driving test subject three and the side parking is less than 30 cm, which generally refers to the distance between the body and the sideline, in fact, it is also possible to use the wheel as the standard.

When hearing the voice prompt "Please pull over", the candidate turns the right turn signal (more than 3 seconds), and at the same time observes the traffic situation on the right rear through the (right) rearview mirror, and after confirming the safety, park the vehicle (on the right side) in parallel within 30 cm of the curb stone (or the solid line on the edge of the road), but not on the curb stone (or the solid line on the edge of the road), stop the vehicle, pull up the parking brake, and pick up neutral.

Subject 3: Operation steps for pulling over:

1. Before parking, observe the traffic conditions in the rear and on the right side through the inner and outer rearview mirrors, and turn on the right turn signal.

2. Press the brake pedal appropriately.

3. Turn the steering wheel to the right (the first wheel is to the right).

4. Press the clutch pedal when the speed of the vehicle is reduced to a speed lower than the first gear, and when the right front wheel is close to the curb, turn to the left (the second wheel, adjust the vehicle and adjust the distance between the body and the curb).

5. Stop quickly in the direction of turning to the left (the third wheel, the wheel of the car is positive). When the vehicle is close to stopping, lift the brake pedal slightly to slow down the braking inertia and stop smoothly.

6. Tighten the hand brake, hang neutral, lift the clutch and brake pedal, and turn off the turn signal.

7. The ratio of the three wheels of the steering wheel is 2:3:1.

8. After parking, the body shall not exceed the right edge line of the road or the edge of the sidewalk, and the body shall not be greater than 30 cm from the right edge line of the road or the edge of the sidewalk.

9. After parking, before opening the door in the car, you should look sideways to observe the traffic conditions on the side and the rear and left.

10. After parking, tighten the parking brake.

11. Do not relax the car brake pedal before tightening the parking brake.

12. Close the door after getting out of the car.

13. Turn off the engine before getting out of the car.

14. Turn off the headlights and turn on the warning lights when temporarily parking on the roadside at night. Motor vehicles must display wide lights and tail lights at night or in wind, rain, snow and fog.