What should I do if the Apple 5S keeps showing the logo and can t turn on?

This is the phenomenon of white apples on the phone, and the state of white apples appears, so it is recommended to reinstall and update the system through DFU mode:

2. Connect the phone to iTunes, turn off the phone, then press and hold the home button and the power button at the same time for about 10 seconds, release the power button, and continue to press and hold the home button until you see the device in the DFU state on the computer, after the computer prompts, release the home button, select the recovery option button on iTunes, and click to confirm the recovery in the pop-up selection box;

3. Next.

itunes

A pop-up prompt will erase everything, and it will also be associated with.

4. Note that the locked version of the mobile phone needs to be replaced with a new card after restoration to activate it.

Press and hold the power button first to turn on the computer, then the Apple logo will appear on the screen, do not release the power button.

Then press and hold the Home screen.

home button until the screen goes black.

When the screen goes black, release the power button to the home screen.

Do not release the home button until it is on the computer.

itunes

A recovery mode has been detected.

iphone。

Then click on the Restore button.

Then. itunes

We will be prompted to verify with Apple's update server and click on the restore button to continue.

Finally wait. itunes

Restore the firmware to the device, and after the recovery is complete, reactivate the device.

Summary. Hello, the system crashed, you need to restore the system.

Apple keeps appearing that the logo can't be turned on.

The Apple logo keeps appearing on the Apple phone when it doesn't turn on.

Hello, the system crashed, you need to restore the system.

Hello, the details are as follows: 1. Turn off the phone, press the volume plus button, and then press the volume down button. 2. Then press and hold the power button, and when the Apple logo appears, release the power button.

3. Continue to press and hold the power button until you enter iPhone recovery mode. 4. Open the Tenorshare iPhone repair tool on the computer, connect the phone with the computer with a data cable, and select Restore when the computer detects the phone.

Hello, the steps of Apple system repair are as follows: 1. Connect the iOS device with the computer Tenorshare Apple Phone Repair Tool through a data cable.

You can recover yourself.

2. Select "Standard Repair" or "Deep Repair" according to the specific situation. Note: Standard repair will not cause data loss, but deep repair will cause data loss, so you need to back up data in advance.

Note: The repair process will take about 10 minutes, please do not disconnect the connection between the computer and the mobile phone during this process, after the repair is completed, the repair success interface will pop up according to the prompts.

Dear, you can try.

Good. Dear, if it still doesn't work, go to the local physical store to find a professional to investigate.

The solution to the Apple logo that keeps showing the Apple logo after turning on the iPhone is as follows:

Operating mobile phone: Apple 13

Operating system with Zen system: iOS 13

1. When the Apple phone is turned on, it can't boot normally, but white apples appear, which Lu may need to recover the system at this time.

2. First of all, find a computer with iTunes installed, open the iTunes software on the computer, and connect the iPhone and the computer with a data cable.

3. At this time, prompts such as "Extract Software" and "Prepare Software Update" will appear on the computer.

4. Find the management interface of your iPhone on your computer, find the "Restore iPhone" option in the lower right corner, and click to enter.

5. Find the "Restore and Update" option in the next interface and click to enter.

6. At this time, you can see that iTunes is in recovery mode, which means that it is recovering.

7. You can see the remaining time for recovery on the page.

8. When a white apple appears and there is a progress bar underneath it, when the progress bar is completed, the recovery is completed. <>

Summary. Hello, it may be that your phone is an old phone, or a refurbished phone, so it is unstable itself. So it leads to a black screen.

Apple 5S turns on Apple logo and the screen goes black after it appears, why?

Hello, it may be that your phone is an old phone, or a refurbished phone, so it is unstable itself. So it leads to a black screen.

Black screen after iPhone logo is turned on.

Can it still be repaired. If it is a system failure, you can press and hold the power button and home to turn it on, or press and hold the power button and the sound button together for 10 seconds to try to turn it back on.

When the phone is turned on, the logo screen goes black.

If it doesn't work, go to the mobile phone to repair it, and it is estimated that dozens of dollars will solve the problem. Just find someone nearby to fix your phone.

Well, thanks. Uh-huh, you're welcome, give a thumbs up if you can. Have a great day.

Hello dear, I'm glad to answer for you, Apple Yuanying brother has been appearing logo can't turn on, it's the system that has gone wrong. You can directly press and hold the power button and the home button at the same time. Generally, it is possible to solve the orange attack. Here's how to force restart.

With the help of a third-party mobile phone assistant. Since some computers can't use iTunes normally, they can only be solved by other software, but there are certain risks.

The mobile phone has never been turned off due to long-term use, and the mobile phone has prompted that the memory is insufficient, this situation is very prone to the failure of the white apple not to boot, the solution is only to use the computer to recover the system, there is also a part of the problem that occurs after updating the system, if the system has been installed to dismantle the leakage of the white apple, then only need to force a restart to solve, if the system is not installed before the search, at this time the phone will directly enter the recovery mode, Connect to a computer recovery system and you can solve the problem.

The phone can't be turned on or turned off.

Yes, you need to use a computer connection to force the boot in this case.

The phone can't be turned on, and it can't be connected to the computer.

Which software.

AIS Assistant. What is the name of which software in AISI can force boot?

It's a one-click flash.

The phone is white Apple, and there is no response when connected to the computer.

Can the phone be re-energized, normally yes.

Summary. Hello. For you:

When there is a software problem or hardware problem with the Apple mobile phone, the mobile phone will be stuck in the interface of the Apple logo and cannot enter the system, if it is a system problem, we can try to force restart the mobile phone or flash the mobile phone to solve it, if it is a hardware problem, then we need to send it to a professional mobile phone repair shop for maintenance. If there is a problem with the system of the Apple mobile phone, such as the mobile phone is installed with incompatible software, the mobile phone has cracked the highest permission, the mobile phone memory is too full, etc., it will cause the mobile phone system to crash, once the system collapses, the mobile phone will appear to boot up has been infinite white Apple interface, the solution is that we can first try to force restart the mobile phone, if this is no way, you can go to the person who repairs the mobile phone.

Hello. For you to inquire: when there is a software problem or hardware problem with the Apple mobile phone, the mobile phone will be turned on and stuck in the interface of the Apple logo can not enter the system, if it is a system problem, we can try to force restart the mobile phone or flash the mobile phone to solve it, if it is a hardware problem, then we need to send it to a professional mobile phone repair shop for maintenance.

If there is a problem with the system of the Apple mobile phone, such as the mobile phone is installed with incompatible software, the mobile phone has cracked the highest permission, the mobile phone memory is too full, etc., it will cause the mobile phone system to crash, once the system collapses, the mobile phone will appear to boot up has been infinite white Apple interface, the solution is that we can first try to force restart the mobile phone, if this is no way, you can go to the person who repairs the mobile phone.

This is how to force restart your phone.

It's been flashing. I was just listening to a song and suddenly the screen went black.

Then I pressed the power button, and he kept flashing his apple logo, and then it went black and then it flashed again.

Force a reboot.

Get your feet wet. It didn't work, what was going on.

If the force restart still doesn't work, it's a hardware problem!

I'm going to find someone who specializes in repairing mobile phones.

How much does it cost to fix this?

Not much.

You don't need to change anything.

If you need to change something, it will be more expensive.

Apple's logo keeps appearing that it won't turn on may be because of dead power, software failure, system crash, system problem, hardware problem, etc.

1. There is no power.

If all the battery power is consumed, the charge needs to be charged to 5% before it can be turned on normally. So in this case, please let the phone charge for a while and then try to turn it on.

2. Software failure.

If you are sure that the current battery of the mobile phone is sufficient, but it cannot be turned on normally, there may be a problem with the software system of the mobile phone. When this trillion Zheng Qi is in place, we can choose a professional iOS system repair software: Niu Xuechang iPhone Repair Tool to repair or clean up.

3. System crash.

4. System problems.

If there is a problem with the system of the Apple mobile phone, such as the mobile phone has installed incompatible software, the mobile phone has cracked the highest authority, the mobile phone memory is too full, etc., it will cause the mobile phone system to crash, and once the system collapses, the mobile phone will appear to boot up the interface of infinite white apple.

5. Hardware problems.

Common hardware problems include short circuit of the boot button caused by water ingress in the mobile phone, corrosion of the face component, damage to the tail plug barometric pressure sensor, disconnection of the mobile phone motherboard, damage to the compass chip, and disconnection of the large audio on the motherboard. <>

The Apple phone boots up and shows the Apple logo, and if it can't be turned on, it is generally the system crash. You can force restart your phone to see if it turns on:

If the force restart won't turn on, you can also use iTunes to restore your iPhone.

1. After connecting your phone to the computer, open the iTunes software.

2. After setting your iPhone into recovery mode, select "Restore iPhone".

3. Confirm the recovery and wait for the automatic recovery to complete.

Fix iPhone with Mad Master Apple Repair Master:

1. Start Crazy Master Apple Repair Master, and then click "Standard Modular Cluster Trillion Plum Style". (This mode can fix the problem of leaking the iPhone without causing data loss).

2. Connect your iPhone to the computer, set your iPhone into DFU mode or recovery mode, and wait for the software to recognize it.

4. Start repairing the device, and you can re-use the iPhone after the repair is completed. <>