Why does Apple 5s show this cable not working

Apple 5s shows that this cable does not work together, then there are the following solutions:

1. If you are sure to use the original data cable, wipe the charging head with an eraser, or blow the charging hole with a hair dryer to avoid static electricity.

2. If you are using a 5S or other model data cable, it is best to change it and try it to ensure that it is not a problem with the mobile phone. Of course, if this problem has never occurred with the data cable of the mobile phone before, and it suddenly appears this time, then don't worry. Plug your phone into your computer and see if it can be charged.

Because it is the problem of the adapter to be avoided.

3. If you have tried all of them and none of them meet your problem, then please connect to the computer, update or restore the system and try again.

4. If it is not possible to restore the system, then please try to charge it after shutting down. Because after the shutdown, the machine software will not determine the adaptation of the data cable. Of course, shutting down and charging is not the ultimate solution.

The incompatibility of mobile phone accessories will cause damage to the battery and the phone, if the phone is under warranty, you can get Apple after-sales service to replace the data cable for free.

5. The general reason why Apple 5s shows that this cable cannot work together may be that the charging data cable is a non-original data cable, and sometimes the mobile phone will automatically recognize the non-original data cable. Because some non-original data cables do not meet the charging needs of Apple mobile phones, which may cause serious battery loss or insufficient charging, try to match the original data cable for charging.

If you are sure that you are using an original cable, then there are the following solutions:

If you use an original data cable, then wipe the charging head with an eraser, or blow the charging hole with a hair dryer to avoid static electricity.

If you are using a 5S or other model data cable, it is best to try it again to ensure that it is not a problem with the phone.

Of course, if this problem has never occurred with the data cable of the mobile phone before, and it suddenly appears this time, then don't worry. Plug your phone into your computer and see if it can be charged. Because it is the problem of the adapter to be avoided.

If you have tried all three and none of them meet your problem, then please connect to your computer, update or restore the system and try again.

If restoring the system doesn't work, then please shut down and try to see if it can be charged. Because after the shutdown, the machine software will not determine the adaptation of the data cable.

Of course, shutting down and charging is not the ultimate solution. The incompatibility of mobile phone accessories will cause damage to the battery and the phone, if the phone is under warranty, you can get Apple after-sales service to replace the data cable for free.

1. Make sure that the mobile phone uses the original data cable.

2. Sometimes the mobile phone will automatically identify the non-original data cable.

3. Some non-original data cables do not meet the charging needs of Apple mobile phones, which may cause serious battery loss or insufficient charging, so try to match the original data cable for charging.

Apple's new system adds verification of cables, which can be used after jailbreaking.

Apple Charge is not certified:

Reason 1: The IC of the lightning interface of the data cable is not working properly, the data cable is damaged, replace the data cable.

Reason 2: The Lightning interface IC of the data cable works normally, but the IC and a code match of the mobile phone cannot work normally, maybe the gold finger of the Lightning interface has been used for a long time and is dirty, try to clean it.

Reason 3: There is a problem of virtual soldering between the lightning interface of the data cable and the PCBA (circuit board) under the gold finger, and the data cable is damaged, so replace the data cable.

Reason 4: The probability of this problem in the cottage data cable is very high, and generally upgrading a new system may lead to such a prompt, please replace the original data cable.

The cable is not original.

If you have a data cable problem, it would be nice to change it.

It should be that the data cable has not passed the Apple MFI certification, and the regular cable will have this logo.

The obvious logo of the certified product on the market is the following Apple MFI authorization logo with black letters on a white background on the front of the package, Apple allows authorized manufacturers to print the authorization label on the product packaging, these logos designed by Apple have very strict regulations when used, the requirements are extremely demanding, and the pass rate of certification is only 2%, in order to maintain the product life cycle and ensure the brand image, Apple requires the authorized accessories to ensure that their quality and taste are consistent with their own. In any case, the product design, product quality, and product compatibility with MFI Apple certified accessories can provide consumers with more credible guarantees in quality assurance than other accessories without certification.