The table at home is always moldy, so what should I do?

1.If the table is always moldy, it tends to be a poor quality table because it is painted too few times, and poor paint quality can cause mold, so try not to let the table get wet. If the table is seriously moldy, it is only possible to replace it with a new one.

If the mold on the table is not severe, you can use a tool such as a hair dryer to dry the table first, and then wipe the moldy areas off the table. Don't put moldy things on the table, such as cakes, which can easily cause the table to become moldy. It can usually be dried with a tool, ventilated for more than 4 hours a day, and put as many western items as possible in the drawer of the table, such as books, etc.

And it also reduces mildew.

2.At home, you should also pay attention to opening windows frequently for ventilation, and do not use humidifiers at home.

After mopping the floor every day, pay attention to opening the window or fan, and wipe the air conditioner to dry the water in time; Clean furniture surfaces with a feather duster instead of a damp rag to keep the tabletop dry. The most effective way to control mold growth is to control humidity. Here are some things you can do to fix the source of the leak by looking for a plumber or HVAC, which is the most likely cause of the moisture that mold depends on.

Reduce the indoor humidity, the optimal indoor humidity is about 40%.

3.Turn on the exhaust fan when cooking, washing dishes, and cleaning.

Use soap and a sponge to remove visible mold spots. If the moldy area is dry, you can lightly spray it with a mist of water to prevent mold spores from being fed into the air during cleaning. There are leather furniture, clothes, etc.

At home. It is best to remove the mildew with a mold remover after the dust is dry, and then apply leather maintenance oil to its surface. If the mold is not too severe, it is enough to wash the walls with 80% alcohol.

Pay attention to ventilation when washing, and wear protective gloves, masks and glasses.

4.In order to avoid re-mold, care should be taken to dry the walls thoroughly, eliminate the cause of mold, and properly heat and ventilate. Buy a desiccant for indoor use.

It can effectively remove indoor moisture. After the desiccant is used up, it needs to be replaced in time. The best way to prevent mold on your walls is to prevent condensation on your walls. In the northern region.

When the room temperature is 18 degrees Celsius, the relative humidity.

At 60%, anything below Celsius will condense.

You can maintain it, ventilate it more, understand the moldy situation of the table, and deal with it according to the experience of life.

You can clean it with an anti-mold cleaner, and then apply some wax to the moldy area, or spray the mold prevention agent after cleaning it with another mold remover, or you can use alcohol or bleach to treat the moldy furniture, and then put it in a ventilated place to expose it to the sun, which can improve the mold situation of the table.

It should be washed once a week, and you can put some dish soap when cleaning. This way, it can be handled well and there will be no mold.

In family life, it is more convenient to buy some dining tables, desks and the like to place items, and it can also improve the life taste of the family, so what should I do if the table is moldy?

First of all, the table is susceptible to the influence of humid air because of its special material, if your table is damp and moldy, you can use a clean cotton cloth dipped in a special furniture cleaner to remove mildew, and then apply a layer of wax or special furniture essential oil on the moldy **. If you don't have a furniture cleaner at home, you can replace it with tea. However, when wiping it down, be careful not to leave marks on the table.

Secondly, we can put a piece of soap to remove the musty smell after the table is moldy, or you can also take the tea leaves that you don't use at home and put them on a plate or put them in a gauze bag to remove the musty **. The tea leaves here can be reused, just dry them after they have been damp and they can be used again.

Finally, the cleaning method of the table after being damp and moldy is also affected by the seasonality, and the air humidity in spring and summer.

On a larger scale, you can wipe the table with a dry cotton cloth dipped in detergent or tea. In autumn and winter, when the humidity in the air is low, you should wipe your slightly damp face along the wood grain when you wipe it again, and do not use a dry cotton cloth to avoid rubbing the table.

If you want to quickly remove the mold on the table, you can use a soft brush to clean the mold on the table, and then use a damp cloth that has been wrung out to wipe the mold on the table, and wait. Leave for about 10 minutes, then spray the anti-mildew antibacterial agent evenly on the moldy part of the table, and finally wait for the table to dry naturally.

If you want to quickly remove the mildew on the moldy part of the table, you can also use a toothbrush to clean the moldy spot on the table, then apply the toothpaste evenly to the moldy area of the table, then use a toothbrush to continuously brush the moldy area of the table, and then use a damp rag to wipe the moldy area of the table clean.

1. You can first use a neutral detergent or a special cleaning agent to remove it, apply some wax to the moldy place, and then wipe it clean with a towel.

2. Use a mold remover, first clean the surface, and spray the mildew with a mold remover after cleaning the mold.

3. If there is alcohol or bleach at home, it can also be used to deal with moldy furniture, and wipe the furniture with a towel after diluting the bleach.

Spray the brush or sponge with anti-mold cleaner to clean the mold ash on the table thoroughly, and then spray the table with a spray gun equipped with anti-mold agent after drying in the natural environment.

If the table at home is always moldy, first of all, we must ventilate it more and put it in a sunny place for exposure, so as to improve the mold of the table.

Wash off the moldy area and blow it dry.

Remove the cabinet and check whether the wall is damp, an important reason for the mold of the cabinet is caused by the dampness of the wall on the back of the cabinet, and there is a water source on the other side of the wall.

If the cabinet is moldy, it is likely that the kitchen environment is not good, and the cabinet is in a humid environment for a long time due to impermeability, so if you want to solve it thoroughly, you have to find a way to dry the kitchen, open the window for ventilation, and for families without windows in the kitchen, you should leave the kitchen door open for a long time and let it dry naturally.

Hello friend: The table is moldy because:1.

The room is too humid, and bacteria can easily grow, leading to frequent mold. Pay attention to open windows frequently for ventilation. Do not use a humidifier inside the house.

After mopping the floor, pay attention to open the window or turn on the fan and air conditioner to dry the water in time.

2.The product quality is not good, the product quality has nothing to do with the first, and expensive does not mean good. Mold is caused by the fact that the paint is applied too few times and the poor quality of the paint can lead to mold. You can wash with a rag coated with petroleum jelly and wipe with a clean cloth.

3. Clean the surface of the furniture and try not to use wet rags. You can use a feather duster, a dry rag, and a special detergent.

4.Find a cardboard box at home and put it in quicklime, put it in an inconspicuous place in the room, it's OK, both damp and disinfect, kill two birds with one stone, and wish you a happy life!

1. If you want to quickly remove the mildew on the moldy part of the table, you can also dilute the drifting water and water together according to the ratio of 1:3, then stir it fully, and then use a rag dipped in some dilution to continuously wipe the moldy position of the table.

2. If you want to quickly remove the mildew on the moldy position of the table, you can first use a soft brush to clean the mildew on the moldy position of the table, and then use a wet rag that has been wrung out to wipe the moldy position of the table, wait for about ten minutes, and then spray the antifungal antibacterial agent evenly on the moldy position of the table, and finally wait for the table to dry naturally.

3. In order to effectively avoid mold on the table, it is recommended that you can put some newspapers, desiccant, mothballs, etc. in the inside of the table or in the drawer, which can not only keep the table dry, but also help the table to absorb excess water, so as to effectively avoid mold on the table.

4. If you want to quickly remove the mildew on the moldy part of the table, you can also use a toothbrush to clean the mildew on the moldy part of the table, then evenly apply the toothpaste to the moldy position of the table, and then use a toothbrush to continuously brush the moldy position of the table, and then use a wet rag to wipe the moldy position of the table clean.

Spray the brush or sponge with an anti-mildew cleaner to clean the table thoroughly, and then spray the table with a spray gun equipped with anti-mildew agent after it has dried in the natural environment.

The antifungal agent will form a protective film on the surface of the wooden frame, and the mechanical sterilization will not seep or wander, and will not be consumed by microorganisms.

A table is a commonly used piece of furniture with a flat surface on it and pillars on the bottom. It is possible to put things or do things on it. Furniture with smooth slabs, held in place by legs or other supports, is used for eating, writing, working, or playing cards.

The origin of the table:

The table was originally called several. It's a hieroglyph. There are two types, one is made by people, and the other is a utensil for human use, that is, a modern table.

If you want to talk about the origin, although there is no conclusive conclusion, if you talk about the development of civilization, it must be used, and the natural stones or other uses used by primitive people have long formed a habit, so the table is born. But that is more of a matter of nature, an objective order of matter.

From the perspective of the Chinese character Youtan, it can be seen that there are a few words in the oracle bone inscription, and don't forget that in ancient times, people used to sit and kneel, so it was very inconvenient to eat and drink, so they needed objects such as tables, so they took things according to their talents, and according to more distant customs, they popularized the use of tables, and made a few of them.

You can dilute bleach and water together and stir according to the ratio of 1:3, and then use a rag dipped in a diluted solution to wipe the moldy area of the table to remove the mold, or you can also use toothpaste to apply it to the moldy area of the table, and then use a toothbrush to continuously scrub it, and finally wipe it clean with a damp rag.

Moldy tables are usually caused by too much moisture in the room and bacteria breeding, so pay attention to opening windows frequently to ventilate to keep the room dry.

It is recommended to put some old newspapers, desiccant, mothballs, etc. in the inside of the table or in the drawer, which can keep the table dry and absorb excess water, so as to effectively avoid the phenomenon of mold on the table.

Generally speaking, try not to use wet rags for cleaning furniture surfaces, and it is recommended to use a feather duster, dry rag or special detergent to clean.

1. Open windows for ventilation. Too much moisture in the room is also one of the important causes of mold in wood materials, so you can't use a humidifier in the room, and you should often open the window to accelerate the flow of air and the evaporation of water.

2. Do not clean with a wet rag. When cleaning the table, do not use a wet rag, wipe it with a feather duster or a dry rag, or mix it with some special detergents for cleaning.

3. Release lime. If the Chaozhou Huaiqi in the room is particularly large, you can fill a box of quicklime and put it in an inconspicuous place, the quicklime bucket can absorb the water in the air, and it can also be disinfected and sterilized.