If the sink is coated with condensation, there will be no condensation

It has a certain effect on reducing the appearance of water droplets.

The role of coating:

The first is the anti-condensation function. Although the sink does not seep water, if you put frozen food such as hairtail in the tank. Condensation tends to form on the outer wall of the sink, which is usually the case in summer.

When the outer wall condenses to a certain extent, the cabinet will be wetted, affecting the service life of the cabinet. Therefore, the addition of a layer can reduce the temperature difference between the inner and outer walls, absorb part of the water vapor, and destroy the formation conditions of water droplets.

The second is that when the water flowing out of the faucet hits the inner wall of the sink, it will produce a certain noise, which is generally acceptable to us, but the addition of coating and rubber pads can effectively reduce the sound of the faucet's impact on the bottom of the basin.

Conditions for the formation of condensate:

When it is necessary to store frozen objects for a long time;

It must be in a particular season, and winter is certainly not there;

The air must reach a certain humidity; Only when these three conditions are met at the same time will condensation occur.

It is difficult to have all three conditions at the same time.

Market status: The coating of the sink on the market is more beneficial to those black-hearted merchants. 80% of the sinks on the market are due to annealing and stretching, so the back of the sink is darker, and the layer covers the sink and obscures the consumer's sight, so that it is shoddy.

There is also a sink with poor processing technology, with thin walls, burrs on the outer wall, welding defects, microcracks, and coatings, so that consumers cannot figure out its quality problems. And many unscrupulous merchants use paint on the surface of the sink to confuse the public, and use it as a selling point**. In fact, the paint does not have a moisture-proof effect at all, and it will also bring odors.

At present, qualified merchants will use alkaline cement or moisture-proof paint to coat the outer wall of the stainless steel sink, forming a pothole-like effect and having the characteristics of moisture absorption.

How to identify a good coating:

A drop of water on it will not bubble and will not change color.

There is a treasure on it, but many fakes are not necessarily 304, so they can be used alive.

It can only be reduced, but if you use hot water for too long in the northern winter, there will be a small amount, and now there is generally heating in the home, so there should be no condensation.

Hello dear. If the coating is not dry, wipe it off with a towel. If it has been dried and formed into a film, it cannot be wiped off with a wet towel.

There are many reasons for this problem, such as the merchant said that the factory time is too short, and it may also be related to the dry environment, and it may also be related to the construction methods of your custom cabinets including sink construction personnel. If you are not at ease or look uncomfortable, you can ask the master to help Jingyuan with the construction again, in fact, it doesn't matter if you don't remedy, our sink rarely puts frozen food, so there is no code draft mold has much impact.

Summary. It may also have something to do with the construction methods of your custom cabinets, including sink builders. If you are not at ease or look uncomfortable, you can ask the master to help with the construction again, in fact, it doesn't matter if you don't remedy, our sink rarely puts frozen food, so it doesn't have much impact.

If it is a sink with electroplating on the metal surface, it is estimated that the sink should be taken down and taken to a special electroplating workshop for processing.

Hello dear! We are happy to help you answer your questions! The anti-condensation coating of the sink should be removed in this way, "The coating can be wiped off with a towel before it is dry."

If it has been dried and formed into a film, it cannot be wiped off with a wet towel. There are many reasons for this problem, such as the merchant said that the factory time is too short, and it may also be related to the dry environment, and it may also be related to the construction methods of the construction personnel of your custom cabinet containing water defeat grooves. If you are not at ease or look uncomfortable, you can ask the master to help with the construction again, in fact, it doesn't matter if you don't remedy, our sink rarely puts frozen food, so it doesn't have much impact.

If it is a sink for metal surface plating, it is estimated that the sink should be taken down and taken to a special large leakage electroplating workshop for processing.