What is the moisture proof strategy for the new home wooden floor in the rainy season? What are the

Every year in July and August, the persistent rainy weather fills the home with moisture. If we don't take good care of the wooden floor, it may crack and deform due to moisture. So, how should we properly maintain the floor during the rainy season? I've gathered for you some moisture protection strategies for wooden floors.

Hazard 1: Warping and deformation of wooden floors. Because the overall indoor space is too humid, it will cause the wood floor to absorb too much moisture in the air, and the high indoor temperature in summer will cause the inside of the wood floor to expand and warp.

Damage 2. The floor was too wet. During the rainy season, the ground of your new home will be relatively wet.

If we don't dry the floor surface in time, it can easily cause family members to slip. Hazard 3: Insects breed inside wooden floors.

Most floor insects are caused by an excessively humid environment, and the main reason for the occurrence of floor insects is that the humidity and temperature in the wooden floor are suitable for the survival of insects. Therefore, if you want to prevent insects, you should mainly do a good job of preventing moisture indoors. Hazard 4:

Mold grows on wooden floors. An excessively humid environment can create a lot of mold on the wooden floors of your new home. If people live in this environment for a long time, it can damage the body's respiratory system.

Introduction to the moisture-proof wooden floor of the new home in the rainy season. Cleaning is necessary in the routine maintenance of the floor. General stains can be treated with a soft, dry rag.

If the stain must be washed with water, it is recommended to use a cloth that is soaked and wrung out until there are no drips. Immediately after wiping the floor, open the doors and windows to allow air to circulate and blow dry the floor. In wet weather, wipe again with a dry cloth and dehumidify with an air conditioner.

Every rainy season, we need to ventilate our rooms regularly. In general, it's best to choose a time when the outside temperature is higher in the middle of the day. In addition, if it rains, it is best to close the doors and windows of the home to avoid a large amount of external moisture pouring into the indoor space; At the same time, when we clean the surface of the floor every day, it is best to use a dry mop to avoid moisture entering the inside of the wooden floor; If we have an air conditioner at home, we can also turn on the dehumidification mode, which can effectively remove moisture from the indoor air.

Laminate flooring is much easier to care for than hardwood flooring. When cleaning the floor, pay attention to keep the floor dry, do not rinse with a large amount of water, and pay attention to avoid long-term immersion of the floor.

When cleaning stains, use neutral detergents to avoid direct sunlight, rain, moisture, etc. In addition, paying attention to indoor ventilation and maintaining indoor temperature are also conducive to prolonging the life of the floor. Laminate flooring does not require paint and waxing, and unlike solid wood flooring, it should never be sanded and polished.

Try to avoid long-term contact with water, especially not with hot water, once there is hot water sprinkled on the floor, it should be dried in time. Avoid sharp objects scratching the floor, don't place anything too hot on the floor, and try to avoid dragging heavy furniture.

You can lay some towels on the floor, you can clean the water on the floor in time, you can open the windows for ventilation, you can also raise the temperature in the home, and you can also treat the floor from moisture. It can cause the floor to rot, it can cause the floor to become hairy, it can cause bacteria to grow, and it can cause the floor to collapse.

You can buy some moisture-proof facilities and equipment, in this way to prevent moisture, the wood floor is easy to cause deformation, easy to lead to mildew, will seriously affect the quality.

If it is in summer or spring, the humidity is very heavy in the area of interior decoration, and the wooden floor is very easy to return to moisture. Geographical advantages and according to different areas have different interior decoration methods, different home decoration materials, interior decoration, if the owner has to install the floor in the damp leakage area, then the quality of the wooden floor will return. People and floor paving is all necessary to have a certain skill and technique, please ask the master is especially critical, he knows what kind of flooring, <>

How to lay your wooden floor to maintain a good posture. If you encounter a master who is not very technically good, then your wooden floor is not just as simple as returning to moisture. Before the construction of the base treatment project, check whether the bottom layer has uneven gaps.

If it is uneven, you can choose cement sand ground leveling or cement self-leveling ground leveling; However, the gaps can be repaired with the materials of the polished bottom layer, and the wooden floor can be laid after repair.

Laying a moisture-proof mat on the floor is a moisture-proof mat that is a bit like a foam cushion to ensure that the wooden floor is not easy to return moisture when paved. Find a rainy season in good weather is really not suitable for interior decoration, whether it is wall paint or floor paving, will ruin the good mood of new house decoration. So try to find a good time to start your interior renovation plan when the weather is nice.

There are many kinds of wood flooring on the market, so you must first do a good job of professional knowledge before decoration, and then find a trustworthy business to buy wood flooring with guaranteed quality.

Find an experienced master to find a user to review five-star praise, technical five-star praise is very important. If your house is more damp and cold, it is not recommended that you install wooden flooring, because once the wooden floor returns to moisture, it is equivalent to scrapping, and the better choice is to paste the floor tiles under the premise that the house is too damp, not afraid of moisture, and has a long service life. If the house is temporarily damp and cold due to the renovation project, you don't need to worry, the indoor ventilation for a period of time, immediately start to lay the wooden floor, and spread the moisture-proof film under the floor, it will not happen that you are worried about the problem!

It is indeed more afraid of moisture, which is very easy to lead to deformation and rot.

Yes, so in the Tohoku region, wood flooring is generally not chosen. It will only be used in Shanghai. Because the weather in Shanghai is relatively dry.

I think this is indeed the case, because we must choose some moisture-proof wood flooring, and then if the moisture-proof performance is not good, under the low-heat barbecue for a long time, once moisture enters, it will make its corners warp and cause damage to the floor.

1. Clean and moisture-proof.

Daily cleaning is essential for sports wood flooring. In the process of cleaning sports wood flooring, it is necessary to pay attention to waterproof and moisture-proof. For example, don't use wet mops, don't sprinkle water on the sports wood floor, etc.

2. Weather waterproof.

People have good fortunes and misfortunes, and the sky has unpredictable storms and clouds. Especially on windy and rainy days, remember to close the windows in time to prevent the outside rainwater from drenching on the sports wooden floor.

3. Anti-soaking water.

The daily maintenance staff of the stadium wooden floor should often overhaul the floor heating and water pipe facilities of the stadium to prevent water leakage and water soaking accidents on the sports wooden floor.

4. Balance moisture content.

Sports wood flooring has the characteristics of thermal expansion and cold contraction, to maintain the balanced moisture content of sports wood flooring, and keep it between 6% and 12%, so as not to cause the floor to deform due to water absorption or water loss;

5. Indoor ventilation.

The indoor dry humidity of the stadium should be constant, the indoor temperature and humidity of the stadium should be monitored, the ventilation facilities should be always open, and the ventilation holes should work normally. Create a constant indoor environment for sports wood flooring.

1. Do not expose to the light.

Sports wood flooring should try to avoid direct exposure to strong sunlight and long-term scorching of high-temperature artificial light sources, so as to avoid premature cracking and aging of the floor surface.

Basketball hall floor.

2. Close the windows in the rainy season.

Keep your windows closed during the rainy season to avoid the rain soaking the floor. At the same time, it is necessary to pay attention to indoor ventilation, dissipate indoor moisture, and maintain a normal indoor temperature is also conducive to the extension of the life of the floor.

3. Humidification should be done in autumn and winter.

In autumn and winter, in order to increase indoor air humidity, you can use a humidifier to keep the indoor air humidity at 50 to 70.

4. North and South regions.

The climate in the north and south of our country is very different. In the stadiums in the southern region, the windows should be always opened, and the air conditioning should be turned on indoors to maintain air circulation and maintain the dryness of the sports wood floor; In the northern region, the floor is prone to cracks and cracks due to the dry climate. Therefore, when the climate is dry, it is necessary to pay attention to increasing the humidity of the floor surface appropriately.

The moisture-proof measures when laying wooden floors are mainly as follows:

1. Before paving the wooden floor, a layer of moisture-proof cloth and a layer of moisture-proof pad should be placed on the ground line. This is the most basic and important moisture protection measure for all floors before they are installed.

2. Fully consider that the wooden floor is greatly affected by cold and heat, so it is necessary to leave enough gaps for the floor during paving, so that the wooden floor shrinks and does not have enough space to warp at the low temperature in winter.

3. When paving wooden floors, the thickness of the baseboard should be in centimeters. Make sure that there are enough expansion joints when the wood floor expands and contracts hotly and coldly. (Note:.)

If the floor area exceeds 8 square meters, a divider should be set up to separate the excessive area, which can also play a good role in avoiding the uplift and deformation of the floor. ）

The moisture-proof task is the most important work before the laying of the wooden floor, and the moisture-proof performance is also the most important technical indicator of the wooden floor. The moisture-proof work of the floor before laying is not done well, and during use, moisture will slowly soak into the floor, causing the floor to swell or warp the edges. Wood flooring should pay special attention to moisture protection, so it is important to take moisture protection measures before laying wood flooring.

Moisture is everywhere, making it impossible to prevent it, and the wooden floor is prone to mildew, decay and deformation when damp. Moisture not only affects the normal use of wood flooring, but also breeds harmful bacteria and parasites. So, how can Jinan consumers make the wooden floor and their families safe and moisture-proof, and let Jinan rest assured that Abu will teach you a few tricks:

First of all, Jinan Anxin Floor reminds you: when choosing a wooden floor, you should not only consider the material, lacquer technology, and design style of the wooden floor, but also choose a strong brand of wood flooring. When regular brands select raw materials, they generally dry the wood floor in advance, and take moisture-proof measures in the process of production, transportation and storage.

Therefore, choosing a good wood floor is a key step in the protection of the floor from moisture.

Again, Jinan Anxin floor believes that the wooden floor is "three points of the floor and seven points of installation", no matter how good the material of the wood floor, if the paving is not meticulous, it may also cause the wood floor to be damp in the rainy season. Therefore, it is necessary to hire a professional construction team and supervise the home decoration.

After choosing a good wooden floor, you can not ignore the supervision of the installation link, and you can also install a moisture-proof film before the installation of the wooden floor.

Finally, Jinan Anxin Floor believes that the right time should be selected when paving wooden floors in order to absolutely achieve moisture-proof work. The time to install the wooden floor should be selected in sunny weather, it is best to install the wooden floor for 7 days on a sunny day, and after the ground is dry.

Under the floor, a layer of waterproof membrane should be laid (sold in building materials stores), and then some camphor wood blocks (sold in building materials stores).

Household dehumidifiers, ** ranging from 1000-3000.

Wax the floor frequently, at least once every 3 months.

Glue the moisture-proof mat interface with adhesive tape.

1. Drying of sports wood floors.

In the production process of solid wood sports wood flooring, a professional drying process must be carried out. This art is very important. When the sports wood floor leaves the factory, the moisture content of the sports wood floor should be balanced. How much exactly? It should be adapted to the climate and environment where the stadium is located.

2. Install moisture-proof measures.

Before the installation of sports wood flooring, it is necessary to level the pavement floor of the stadium and do a good job of dehumidification; The sports wood floor installation system should be equipped with moisture-proof membranes, ventilation holes and other moisture-proof accessories; Expansion joints should also be reserved during the installation of sports wood flooring, which can prevent dampness and bulging of sports wood flooring.

3. The humidity in the gymnasium is guaranteed to be between 35% and 50%.

Good external conditions are the basis for the maintenance of sports wood flooring, especially the environment in the gymnasium, and it is best to keep the humidity in the gymnasium between 35%-50%. If the outside air is dry due to the influence of the northern monsoon during the dry winter season, the air humidity in the building will be reduced, so it is necessary to keep the museum closed and reduce air ventilation and convection.

4. Maintenance and waterproofing.

Sports wood flooring should be waterproof in daily maintenance, such as sports wood flooring should not be soaked in water, and the water facilities of the stadium should be tested at ordinary times to prevent the sports wood floor from soaking in water.

In fact, no matter what type of floor has a characteristic, that is, it is easy to crack and arch and deform when it is damp or soaked in water, and once this happens, the service life of the wooden floor will be greatly shortened. Therefore, wood flooring needs to pay special attention to waterproof and moisture-proof in the purchase, installation and future maintenance. The following king coconut board will take you to understand how to buy flooring.

1. Check the surface for cracks.

Cracks in the floor not only affect the appearance of the paving, but also in the wet season, moisture and moisture will seep into the inside of the floor along the cracks, causing the floor to regain moisture.

During the inspection, you need to carefully observe the surface of the floor and touch it with your hands to feel if it will scratch your hands.

2. Check the thickness of the floor.

The thickness of the floor in line with the national standard is generally 8mm, if the thickness of the floor is lower than this standard, the floor is not strong enough, easy to break, and the waterproof and moisture-proof performance is poor, and the floor is usually lower than 8mm for inferior laminate flooring (except for imported and high-end).

3. Check whether there are wormholes.

Wormholes are common in many wooden floors. If the area of the wormhole is large, it will affect the moisture-proof performance of the floor, but the small diameter and evenly distributed wormhole can be used as a kind of texture decoration for the wooden floor. When purchasing, it is necessary to check the area and distribution of wormholes in the floor, which usually appears in pure solid wood flooring or multi-layer three-layer wood flooring.

4. Knock on the surface to check the internal decay.

The raw material of the floor is wood, and some floors will rot due to improper storage and other reasons. Decay is divided into internal decay and external decay. The rotten floor is easy to deform, mildew, and poor waterproofing after being paved.

If the sound is dull and the weight is light, it means that the floor may have internal decay.

5. Test its water absorption with clean water.

The density of the substrate of high-quality wood flooring is very high, and it is not easy to absorb water and return moisture. You can pour water on the substrate of the floor, and if it floats on the substrate like dewdrops, it is of good quality. But if you absorb it when you see water, you should buy it with caution.