The fastest way to transfer files from two computers

First: You can use a USB drive, move a hard drive or something like that.

The second option is to connect the two computers directly with a network cable and must be under the same workgroup to transfer the shared file.

Type 3: Same as the second type, but no wireless network.

The main workarounds are:

1. If it is a local area network, it can be transmitted over the Internet, such as directly using QQ to transfer files, and the speed can reach several megabits per second (depending on the local area network).

2. If it's not a LAN, then use a mobile hard disk.

3. If you don't have a mobile hard disk, you can consider using a network cable to interconnect and transmit it through sharing.

4. If there is no network cable, the two computers are equipped with Bluetooth devices, which can be transmitted through Bluetooth.

Increase the default speed limit of the computer, and 10ms will be increased. Use a good thread.

How to turn on Run --Computer Configuration --- Management Templates --Network --- QoS Packet Scheduler --- throttling the reserved bandwidth.

Select Enable, then change 20 to zero.

200g is so big, why can't it be faster. It may be faster to configure the notebook.

Sometimes we need to transfer large-capacity files between two computers, such as the image file of the system backup, or to copy the files in the entire hard disk, and we can't find such a large removable storage device, what should we do, in fact, in the absence of a network and large-capacity removable disk, we can use a network cable to operate, easy to solve the problem. The principle is to use the function of LAN transmission between computers, and use network cables to directly connect two computers to quickly transfer large files.

Tools Raw materials.

Two computers. A network cable.

Method steps.

1.Turn on the two computers first, and then connect them with network cables, and plug them directly into the ports you usually use to surf the Internet.

2.First, find the file you want to transfer on your computer. Then set up sharing.

For example, if I want to transfer files from one disk to another computer, I can set the disk to be shared, or it can be a folder. Method: Select the Chinese folder, right-click, click Share, and operate in turn.

3.Query the IP address after setting the sharing: method, enter cmd in the run, click OK, then enter ipconfig in the pop-up window, and press the enter key, so that you can see the IP, and make a note of this IP.

5.Once you're OK, you'll see that we're connected to both computers and can see the files we shared earlier. Now you can select the file and right-click to copy it to the disk on your local computer.

6.You can open the local disk, right-click to copy and paste, and achieve the purpose of our file transfer. This method can be used to transfer and restore system backup files, or it can be used to share files between domains.

1. Turn on the two computers first, connect them with network cables, and plug them directly into the ports you usually use to access the Internet.

2. Find the file you want to transfer on your computer. Then set up sharing.

3. Method: Select Chinese folder.

Right-click, tap Share, and then do the following.

4. Query the IP address after setting up sharing.

method, enter cmd in the runtime, and click OK.

5. Enter ipconfig in the pop-up window, press enter, you can see the IP, and write down the IP.

7. I am connected to two computers, and I can see the files that I shared before. Select the file and right-click to copy it to the local computer's disk.

8. You can open the local disk, right-click to copy and paste, and achieve the purpose of file transfer.

2. You can use the file sharing function of the computer to share and copy the file.

3. If only the LAN can be set up and sharing will not be set, the software can be used to transfer files to each other.

4. Files can be copied through data disks such as USB flash drives.

How do I transfer files between two computers via WiFi?

1.Both computers are connected to the same wifi network.

2.Then log in to QQ on every computer, and the two QQ are friends with each other.

3.Find a QQ friend who logged in to another computer in QQ on one computer.

4.You can transfer files or folders via QQ chat.

5.On another computer, click - Save As to transfer the file to that computer.

The principle is to use the LAN transmission function between computers, and directly connect two computers with network cables to quickly transfer large files.

Steps:1Turn on the two computers first, and then connect them with network cables, which can be directly plugged into the ports you usually use to surf the Internet;

2. Find the file you need to transfer on your computer, and then set up sharing, by selecting the Chinese folder, right-clicking, and clicking Share;

3. After setting up the sharing, you can query the IP address, you can enter cmd in the run, click OK, and then enter ipconfig in the pop-up window, and then press the enter key, so that you can see the IP;

4. Enter the IP address you have checked before in the operation of another computer;

5. After clicking OK, you can connect to the two computers, and you can see the previously shared files;

6. Finally, open the local disk, right-click to copy and paste, and you can achieve the purpose of file transfer.

Copying with a portable SSD or USB flash drive is the fastest.

The fastest way to transfer files between two computers is to share files, so look for a tutorial on how to share files on the Internet.

If two computers need to go to the Internet, it is generally common to compress the file through QQ, WeChat, email, and cloud disk links. The speed of the fast transfer depends on the network speed of both computers. If the two computers are connected to the local area network, you can use computer resource sharing, or you can use software such as HFS to share the local area network, which is super fast.