How to do the print on the street light pole

One is laser marking, and the other is stamped out of advertising iron plates.

The printing on the street lamp pole is done through a series of processes and techniques. A common printing process will be described below.

First, make a printed design pattern. According to the needs and themes, the designer uses computer software or hand-drawing technology to design the printed patterns on the street lamp poles. This design pattern needs to take into account the shape and size of the pole, as well as the feasibility of the print.

Next, transfer the design pattern to the print template. A stencil is a mold that resembles the shape of a street lamp pole and can be used to make a print. The design is transferred to a template that can be drawn using a digital printer or by hand.

Then, prepare the printing material. The printing material is usually a special ink or pigment that creates a long-lasting pattern on a street light pole. Choose the right color and material according to your design needs.

Next, apply the printing material to the printing template. Using a tool such as a scraper or brush, apply the printed material evenly to the stencil. Ensure the thickness and uniformity of the application to guarantee the quality of the printing effect.

Then, place the stencil on the street light pole. Place the stencil coated with the printed material carefully on the street light pole, making sure that the pattern is in the correct position and orientation.

Finally, the printing is carried out. Using a press or by hand, the printing material on the printing template is transferred to the street lamp pole. By applying the appropriate pressure, the printed material is in contact with the surface of the street light pole, so that the pattern is transferred to the street light pole.

After the printing is done, it needs to be dried and cured. Depending on the characteristics of the printing material, choose the appropriate drying method, such as natural drying or the use of drying equipment. Curing can increase the durability and fading resistance of the print.

In general, the printing on the street lamp pole is done through a series of processes and techniques such as designing, making templates, applying printing materials, printing and curing. These steps require professional designers and technicians, as well as the appropriate equipment and materials, to produce beautiful, long-lasting prints.

First, carve the words that need to be sprayed into a hollow font mold on plastic paper, and then paste the font mold on the lamp pole, and then spray paint towards the hollow place, and remove the font mold after spraying.

A plate is fixed in the middle of the flagpole of the upper and lower two ends, the flagpole of the upper and lower ends and the plate fixed in the middle form an advertising board, and the fixture that connects the street lamppost is arranged on this advertising board. The fixture is welded to the plate and is a ring structure with clamping screws at the end. The advertising board formed by the flagpole at the upper and lower ends and the plate fixed in the middle is divided into two layouts on the left and right, and two sets of fixtures are arranged on the flagpole at the upper and lower ends.

It is convenient to locate, and if you are lost or criminal, you can locate your location at the first time, and when repairing the lamp, you can also quickly locate the street lamp itself.

It is a paste made of flour and is difficult to tear off.

Now another new material can be pasted on the light pole, and small advertisements cannot be pasted.

Street lights are basically powered off during the day and only powered on at night, and the cameras can't work without power. The solution is to lay another power supply line, but it is expensive; Or use the three-state inverter smart street lamp of the opening and closing electrical appliances, and the three-state inverter smart street lamp turns off the LED light during the day and turns on the LED light at night, so that the street lamp and the camera share the power supply line and save money.

There are many ways, depending on how you choose.

At the same time, you should also budget first, after all, you also have to consider the cost.

There is also the need to resist the wind.

Since there are too many advertisements on the telephone poles, why don't you consider making a base?

I have a few styles in my hand, which were originally made for Zibo Electric Power, and now the project is completed. If you want. You can call ** for me. 024 8222 5058 Mr. Wang.

This should be a cable burglar alarm device. If the cable is stolen and cut, the device can send an alarm signal to the control center.