How to do the renovation of street lamp poles, and how many years do street lamp poles be replaced

The refurbishment of street light poles is to enhance their appearance and function, and extend their lifespan. Here are some methods and steps for street light pole renovation.

First, carry out exterior cleaning. Use detergent and water to clean the surface of the pole to remove dust, dirt, and buildup. It can be cleaned with a brush or a high-pressure water jet to ensure that the surface of the pole is clean.

Next, check the structure and stability of the light pole. Inspect the pole for cracks, rust, or other damage. If there is damage, it needs to be repaired or replaced. Ensure that the structure of the light pole is stable and able to withstand the influence of the natural environment such as wind and rain.

Then, it is sprayed. Choose the right spraying material, such as anti-rust paint or anti-corrosion paint, and spray the light pole. The spraying material should be weather- and corrosion-resistant, able to protect the surface of the pole from oxidation and corrosion.

When spraying, pay attention to even application to avoid dripping and missing coating.

Next, the electrical system is overhauled. Check the electrical equipment inside the pole, such as light fixtures, wires, and switches, to make sure they are working properly. Repair or replace if needed. At the same time, check the grounding system and insulation system to ensure electrical safety.

Finally, the decoration and identification of the light pole is carried out. Decorations such as flower baskets, flags or billboards can be installed on the light poles to increase their aesthetics and publicity effect. At the same time, the street lamp number, road name or other relevant information can be identified on the light pole to facilitate management and maintenance.

In summary, the refurbishment of street light poles requires steps such as exterior cleaning, structural inspection, spraying, electrical system overhaul and decorative signage. Through these steps, the appearance and function of street light poles can be improved, their service life can be extended, and better lighting and safety can be provided for pedestrians and vehicles.

It's simpler, with a lift truck for direct surface treatment and direct painting.

Kiss, <>

I am glad to answer for you, oh, the street lamp pole is replaced once every 4 years, and the street lamp pole is an obtuse angle, and the street lamp illuminates the ground area of the old Qiao, so that the answer to the two poles of the street lamp is as small as possible. If the street lamp pole is an acute angle or right angle, there will be a large lighting blind area between the two pole street lamps, the circumference of the standard street lamp pole is centimeters, the main pole is a tapered pole, the diameter of the upper mouth is about 85mm, the diameter of the lower mouth is about 200mm, the pole is made of steel pipe with a diameter of 60mm, the outer length of the motor lane is meters, the sidewalk is meters, and the wall thickness is 3mm. The average diameter of the pole = mm, the circumference = * mm = cm, I hope mine can help you!