What to do if the loquat only grows saplings and does not bear fruit

No, why is that? In addition to the influence of variety, rootstock and land conditions, and seedling quality, there are several main reasons.

1.Fertilizer and water input is less in the young tree stage, if the fertilizer and watering are less, let the growth, the young tree is not nutritious enough to meet the material needs of the flowering stage. For this "starving" young tree, fertilizer and water should be increased to improve the nutritional status in order to bear fruit in time.

2.Improper pruning for young trees If the pruning of young trees is 1 year 1 stub, and too heavy stubs, it will inevitably cause vigorous growth, unstable tree momentum, and it is difficult to flower and bear fruit. The pruning of young trees should be based on the long-term goal of shaping, with the purpose of increasing branches and expanding the crown and stabilizing the tree potential.

3.If it is a young tree that does not open at the angle of the branch, the tree will inevitably be vigorous and not slow, the growth center will move outward, the inner hall will be closed, the ventilation and light transmission conditions will deteriorate, and it will be difficult to flower and bear fruit. The solution is to open the branch angles during the growing season by brace, pulling, pinning, hanging, etc., which is the structural basis for early fruiting.

4.Effects of pests and diseases and intercropping Orchard management is extensive, and most of the pests and diseases are serious. Branches, shoots and leaves were damaged to varying degrees, which inhibited normal growth and delayed the fruiting period.

Some orchards unscientifically plant some intercrops, compete with fruit trees for fertilizer and water, compete for light, and even become the host of fruit tree pests, which is not conducive to the growth of fruit trees and the sunburn.

The flowering season of loquat overlaps with the season of harvesting late-maturing corn, and the adults of some corn borers will fly to the flower buds of loquat to lay eggs and reproduce offspring, because their larvae will eat part of the flower buds, so it is clear that the flower buds later become leaf buds, if this is the case, drugs can be used to control their reproduction. There is also a possibility that the vegetative growth of the tree is better than the reproductive growth, and some physical and chemical methods can be used to control it.

Did your grandfather cut off the tooth branches when he was pruning?

Did your grandfather have the skills to get into loquats?

It's that after the loquat bears fruit, the branch that bears fruit is the branch of the next year's tooth tree.

Hello, there are many reasons why loquat trees do not bloom, such as too much rain during the flower bud differentiation period, insufficient fertilizer and water, untimely pruning, serious damage from pests and diseases, etc., all of which will lead to loquat not flowering or less flowering and fruiting. Strengthen management in this area to help a bumper harvest in the coming year. Here's how:

1. Strengthen water and fertilizer management

After the end of the annual fruit picking, nutrition should be supplemented in time, nitrogen fertilizer should not be used in the flower bud differentiation stage, mainly phosphate fertilizer, and potassium dihydrogen phosphate can be sprayed on the foliar surface, such as potassium dihydrogen phosphate of Haihewei phosphate that chelates without hurting the leaves.

2. Strengthen summer pruning

Thinning of overly dense branches, weakened branches, overlapping branches, crossed branches, long branches, and redundant groups of branches without space development or weakened large branches in the canopy. Top summer shoots fruiting branches leave 5-10 cm short pruning.

The fruiting branches of the side summer shoots are longer when they are shortened outwards and shorter when they are shortened to the sides, about 10-20 cm. I keep the sturdy new shoot of the summer draw for 2-3 months. The fruiting branch groups with bare bases, drooping branches, and weakened growth should be retracted to varying degrees.

3. Strengthen orchard management

After picking the fruit, loquat is in the rainy season, so special attention should be paid to ditching and draining to prevent water from rotting roots. In particular, June to July is the flower bud differentiation period of loquat, during which moderate drought is required to force the growth of shoots, increase the concentration of cell fluid at the flower bud growth point, and promote flower bud differentiation.

When planting loquat trees, it is necessary to choose a sunny environment, which will give the loquat tree enough light to photosynthesize, and can produce the nutrients required by the loquat tree in time.

The roots of loquat trees are not resistant to water and moisture, so when choosing the planting environment of loquat trees, it is necessary to make a choice of soil quality, in order to prevent the roots of loquat trees from accumulating water, it is best to choose soil with good drainage and porosity.

The biggest possibility of loquat not flowering is the problem of variety and soil, the seedlings have atavistic phenomenon, it is difficult to flower and bear fruit normally in areas outside the non-origin area, and it is necessary to graft high-quality varieties for improvement; The lack of certain trace elements in the soil is also one of the reasons for the long-term non-flowering. It is necessary to carry out more topdressing outside the roots to prevent and control pests and diseases.

In addition, loquat is a cross-pollination plant, the male flower and the female flower are separated, only pollination, so that the pollen of the male flower is stained on the stigma of the female flower stamen, the pollen will bear fruit after fertilization, usually, the insect will be pollinated, but if there is no insect pollination, it must be pollinated manually to make it fruit.

Extended information: Loquat tree, a plant of the genus Loquat in the family Rosaceae. As a high-temperature and carbon-sequestration plant, loquat tree has a good effect on maintaining water and soil, beautifying the environment and improving ecological conditions. Loquat trees up to 12 meters tall with stout branches densely rusty or grayish-brown hairs; leaves leathery, lanceolate; leaf margins sparsely serrate; It blooms from October to December and matures from May to June of the following year.

Loquat trees do not bloom because of poor varieties and soil. Due to the atavistic phenomenon of some seedlings, it is difficult to flower and bear fruit normally in areas other than the place of origin, and it is necessary to graft high-quality varieties for improvement. The lack of certain trace elements in the soil is also one of the reasons why loquat trees do not bloom for a long time.

Why don't loquat trees bloom? Loquat trees do not bloom because of poor varieties and soil. Due to the atavistic phenomenon of some seedlings, it is difficult to flower and bear fruit normally in areas other than the place of origin, and it is necessary to graft high-quality varieties for improvement. The lack of certain trace elements in the soil is also one of the reasons why loquat trees do not bloom for a long time.

There are two situations that cause loquat trees not to bear fruit, whether they bloom or not. If it does not bloom, it is likely that the soil in which it is planted is not conducive to its growth.

For example, when there is a lack of elements in the soil, it will also cause the loquat tree to not bloom for a long time.

So if it's caused by this, then it's time to top dress.

If the loquat tree blooms but does not bear fruit, it may be due to the lack of insect pollination.

Although the loquat tree is partially male and female, it is alienated and pollinated. That is, the female and male flowers of the loquat tree are separated. And to bear fruit, there have to be insects to pollinate.

Under normal circumstances, there will be insects to pollinate when it blooms, if not, then you can try artificial pollination!

The loquat tree is a very easy fruit tree to grow, and many people plant loquat trees in the farmer's hometown. Because it is not only beautiful, it can be used as a green tree, but also the fruit is delicious and delicious, and the key is that the leaves also have medicinal properties, which can be used to suppress coughs.

Loquat trees are very well managed, and the soil requirements for planting are not high, and there are few pests and diseases, so they can still grow normally even if they are not well managed.

So if it's a grafted fruit tree, it usually takes three years to bear fruit, and it takes at least five years for the seed to be propagated, so you might as well wait and see!

Loquat trees have not flowered and fruited for several years, which usually means that what you are planting belongs to the seedlings, that is, the trees that have not been grafted, so loquat trees are planted for five or six years without flowering and fruiting are also normal, so for such trees, try to take grafting treatment, usually after grafting, you can bloom in the second year, and you can bear fruit in the third year.

Loquat trees have been planted for several years and do not bloom and bear fruit, how to deal with them to bear fruit? Loquat trees are not divided into male and female, grafted seedlings are obviously easier to flower and bear fruit than real seedlings, your loquat tree does not know whether it is real or grafted for a few years, loquat trees take at least 3 years to bloom and bear fruit loquat does not bloom The biggest possibility is that the variety and soil are the problem, the seedlings have atavistic phenomenon, it is difficult to flower and bear fruit normally in areas other than the place of origin, and it is necessary to graft high-quality varieties for improvement; The lack of certain trace elements in the soil is also one of the reasons for the long-term non-flowering. It is necessary to carry out more topdressing outside the roots to prevent and control pests and diseases.

In addition, loquat is a cross-pollinated plant, and the male flowers are separated from the female flowers, and only pollination is carried out to stain the pollen of the male flowers.

Loquat trees. It doesn't sprout, it doesn't grow leaves, what's going on?

First of all, you may want to add**, but you may have forgotten, add**In the question page, there is a camera icon, click on it to add or shoot!

You can scrape the trunk with something hard, and if it's not green at all, it's probably not alive! Naturally, it won't sprout!

If there is green, but it does not sprout, it is most likely that the roots are waterlogged, and the roots have already had problems! Or the trunk is infected with bacteria!

There are many reasons why loquat trees don't bear fruit. If it is due to the lack of age, it is necessary to wait for the plant to mature further. If it is due to lack of nutrients, it is necessary to apply plantar fertilizer before planting, and appropriate topdressing during the growth period.

If it is due to untimely pruning, it is necessary to cut off the excess branches and leaves in the summer. If it is because there is no pollination, it needs to be manually pollinated during the flowering period.

1. Less than age.

Loquat trees grow slowly and have a long childhood, taking 5-6 years to bear fruit and 15 years to reach full fruiting when planted. If you want it to bear fruit quickly, it is generally propagated by grafting, so that it can produce fruit in the second year, and it only takes 8-10 years to enter the full fruiting period.

2. Lack of nutrients.

Loquat trees require a certain amount of nutrients for flowering and fruiting, and if the soil fertility is low and the top dressing is not done in time, the plant will not bear fruit due to lack of nutrients. The soil is usually fertilized with sufficient basal fertilizer before planting, and at the same time it is properly fertilized during its growing season, especially after harvesting, when fertilization can ensure the results of the following year.

3. Pruning is not timely.

The loquat tree needs to be pruned in time during the growth process, and if the branches and leaves grow too luxuriantly and consume too many nutrients, it will also affect its fruiting. Usually in summer, it is necessary to thin out the crossed branches and overlapping branches in time, and at the same time, the fruiting branches should be properly shortened, and the weak fruiting branches need to be updated in time, and 1-2 new shoots should be retained.

Fourth, there is no pollination.

There are many varieties of loquat trees, and some of them cannot be self-pollinated, so they need to be pollinated by hand, and without pollination, they will not bear fruit. Pollination is usually done by collecting pollen after the male flowers bloom and then touching the stamens of the female flowers with the pollen with a brush. In addition, beekeeping can also be done in the park, which can also have the effect of pollination.

Web Links.

1. The age of the tree is not yet reached: the loquat tree has a very long childhood age, and it takes 5-6 years to bear fruit after planting. 2. Insufficient nutrients:

The soil fertility is low, and the loquat trees are not topdressed in time. 3. Lack of pruning: The branches and leaves of the loquat tree are too lush and consume too many nutrients.

4. No pollination: Some loquat tree varieties cannot be self-pollinated and must be pollinated manually.

1. The age of the tree has not yet arrived

Loquat trees grow slowly, and the childhood period is very long, it takes 5-6 years to bear fruit after planting, 15 years to enter the full fruit period, if the grafting method is used to propagate, the next year can grow fruit, 8-10 years will enter the full fruit period.

2. Insufficient nutrients:

The flowering and fruiting of loquat trees need certain nutrients, if the soil fertility is low, and the plant is not fertilized in time, the plant will not bear fruit because of the lack of nutrients.

3. Lack of pruning

If the branches and leaves grow too luxuriantly and consume too much nutrients during the growth of loquat trees, it will also affect the fruit of the plant.

4. No pollination

There are many varieties of loquat trees, some varieties can not be self-pollinated, need to be pollinated manually, otherwise the plant will not be able to bear fruit, usually after the male flowers bloom, the pollen is collected, and then the pollen is touched with a brush to touch the stamens of the female flower, pollination can be completed.

If the loquat does not bear fruit after the fruit, we can solve it in the following ways:

First of all, we can check the healthy condition of the loquat tree, check if there are any pests or diseases, or other diseases, and if so, take timely measures**.

Secondly, we can fertilize and choose the fertilizer suitable for loquat trees, so that the rock is nutritious and the fruit development can be promoted with high jujube.

Finally, we can prune to reduce the fruit of the loquat tree, so that the fruit develops more evenly and promotes the ripening of the fruit.

In conclusion, we should take effective measures to improve the growth of loquat trees and promote the development of fruits, so as to obtain better fruit fruits.

If the loquat does not bear fruit after fruiting, we can take the following measures to solve the problem: first, check the roots of the loquat tree, laugh to see if there are any pests or diseases, and if so, deal with it in time; Secondly, check the nutritional status of the loquat tree to see if there is a lack of nutrients. Finally, check the moisture status of the loquat tree to see if there is a water shortage, and if so, water the tree in time. If none of the above measures work, you can try to change the planting environment of the loquat tree to make it more suitable.