What should I do if the kitchen floor tiles change color and turn dark into flowers?

Floor tiles in the kitchen.

Discoloration may be caused by oil and gas contamination in the kitchen.

Therefore, it is best to use professional methods and detergents to clean it scientifically and safely, which can achieve a more ideal use effect.

How to clean the grease stain on the kitchen floor.

The long-term deposition of grease on the kitchen floor is difficult to clean up with ordinary mopping, so the following is a good way to remove it easily:

Vinegar water to clean. Mix vinegar and water together to form a mixed solution.

Then wet the mop with a mixed solution and repeat this to quickly remove the oil from the ground.

Hay wood ash clean.

In the evening, put the prepared hay ashes in a container and mix them with water to form a paste.

Then rub the paste on the floor grease and wait for the next day to rinse repeatedly with clean water to give the kitchen floor a new look. This is for the kitchen is a concrete floor.

Laundry detergent finishing.

When the kitchen floor is covered with a layer of greasy oil, you can use laundry detergent to finish, first sprinkle some dry laundry detergent on the floor, then bring some water in the rag, don't wring it too dry, and then wipe it on the floor sprinkled with laundry detergent to make the laundry detergent penetrate into the oil, wait for 5 minutes, and then wash the rag with clean water and wring it out and then wipe the oil clean.

Dilute hydrochloric acid to clean the floor tile joints.

Drop the diluted hydrochloric acid on the brick joint, and the hydrochloric acid will emit a lot of small bubbles.

After a few seconds, gently brush the brick joints with a brush to easily remove the dirt from the brick joints, and finally, rinse the ground with clean water.

Bread cleansing. Grease build-up on kitchen tiles can be wiped off with leftover bread.

Because bread is soft, sticky and contains a lot of starch, it is easy to absorb oil. This method is not only simple but also environmentally friendly.

1. The color of the heated surface of the tile changes, and it is impossible for the user to deal with it, because it is the result of internal degeneration. It is not caused by surface contamination. For example, after excessive heating, the surface of the tile will turn yellow and black, which is the manifestation of tile charring, and the tile can only be renewed.

2. If the discoloration of the surface is caused by stains, you need to mix the liquid with acetic acid and wash clothes, and wipe it frequently to clean the stains on the surface of the tile. 3. Because the tile is ceramic, after high temperature treatment, the surface of the tile is also very hard, but it is absolutely not allowed to use steel wire cleaning tools to clean it, which will leave scratches.

First of all, we have to see what seeps in, if it is rust, then it is necessary to wash it with 100:1 dilute hydrochloric acid or oxalic acid, if it is oil or dust and other stains, you can use dish soap, all-purpose water, etc. to clean, if you want to remove the scratch, the difficulty is very high, it is recommended not to do any grinding attempt, because it is definitely worth the loss, after the scratch is cleaned, polish and polish with special polishing wax for stone, and try to reduce this trace. If your bricks have been used for more than three months, don't try to knock them out and replace them again, because after a long time, the variety you buy may not be in stock, and each batch of bricks has a certain color difference, even if it is changed, it is not colored.

Hello, many people are not very clear about how to maintain the tile, resulting in the tile aging quickly, let me explain to you 1, add a small amount of ammonia with soap, can effectively polish the tile 2, with a little linseed oil rags or hydrochloric acid can wipe off the muddy water on the tile. 3. After mixing the same amount of linseed oil and turpentine, it can not only wipe the stains on the tile, but also keep the tile with good gloss. 4. When there are slight scratches on the surface of the polished brick, you can use toothpaste to apply it around the scratches, wipe it repeatedly with a dry cloth, and then evenly apply the wax oil with a cloth and wipe it with a clean cloth to eliminate the scratches and achieve the effect of being as bright as new.

There are three general material conditions for tile discoloration: 1. The completion time is short, the tile is not dry, and the color difference occurs due to the distinction of water content. 2. The process reason of tile paving is that the tile is paved without sufficient water absorption, resulting in the thickness of the wall on the tile and still absorbing the moisture in the cement, resulting in the phenomenon of penetrating the bottom; 3. The quality of ceramic tiles is relatively thin and uneven, as long as the surface material has some moisture, it will cause discoloration.