-
Note that the countertop of the stainless steel cabinet should be kept dry as much as possible, and try to avoid long-term immersion in water, which is to prevent the deformation of the countertop. Do not put anything too heavy or too sharp on the stainless steel cabinet countertop. It can usually be cleaned.
If the oil stains and stains have not been cleaned for too long, you can soak the polluted surface first, and then dip the white vinegar baking soda with a steel wool ball.
Liquid rub. I've tried it, and it's okay.
Personally, I think that if the stainless steel countertop is rusty and just a spot on the countertop, I personally think that you can first scald it with boiling water, and then clean it with a softer cotton cloth to see if it can be cleaned and then polished with silk cotton as new. But tell you that stainless steel won't rust. You've come across fake** materials.
Magnets. We've been doing the renovation for decades, and we'll secretly get a piece for the owner, understand?
Either buy a small set of white marble glue.
According to the preparation method of the outer packaging of marble glue, adjust a little marble glue, and use a blade to scrape the adjusted marble glue on the scratches, hello! If the marble is cut, you can make up the marble marble glue (the marble glue is colored.
tuned to a color close to marble) can be repaired, which can be smoothed and polished by simple sanding.
<>I haven't used a stainless steel countertop, but I have washed a stainless steel pot with grandma powder and a stainless steel door, and the effect is very good. After mixing the grandma powder with water, spray it on the countertop to be cleaned, and then wipe it with a scouring pad after a while, and it will be as clean as new immediately. Because most of the stainless steel countertops in the kitchen are made of 201 stainless steel, not 304 stainless steel.
201 stainless steel.
Basically, it can be said to be stainless iron.
It will also rust slightly, and that kind of thing is floating rust, which is relatively easy to handle. Let's buy cheap stainless steel! The standard is 304 stainless steel.
But the standard is a little lower is the stainless steel of 201. The table must be rusty, the rust point the size of a grain of rice, or a better stainless steel material (316 stainless steel generally does not have this case, but most of the current market seems to be 304 and 202), or replaced with ceramic.
-
The stainless steel countertop in the kitchen has scratches, and the flour wrapped in dumplings is wiped repeatedly with a rag on the stainless steel countertop without water, which can be as bright as new.
-
Polishing repairs are possible.
Slight scratches: If it is mirrored, you can use polishing wax to polish the stainless steel countertop, and if it is brushed, you can use a wire drawing machine to draw the stainless steel surface.
The scratches are very deep: it is recommended to replace them with a new one, use the kind of stainless steel products with good quality, if you need a color, use vacuum coated stainless steel, and pass a layer of no fingerprint oil, so that the protection of stainless steel is better.
-
You can spray some new materials to insulate the air, or paint the scratches so that the air can be insulated so that there will be no rust.
-
The scratches that appear can be wiped with toothpaste, so that the scratches will be wiped off, or the color can be re-wiped to cover them, so that people can't notice them.
-
If it is mirrored, you can use polishing wax to polish the stainless steel countertop, and if it is drawn, you can use a wire drawing machine to draw the stainless steel surface! The scratches are very deep: it is recommended to replace them with new ones, use the kind of stainless steel products with good quality, if you need color, use the kind of vacuum coated stainless steel, and pass a layer of fingerprint-free oil, so that the protection of stainless steel is better!
-
Nowadays, many people will choose stainless steel countertops when decorating, because stainless steel countertops are easier to clean and cheaper than marble countertops. But after using it for a while, you will find that the stainless steel countertop is all scratched. Today, I will talk to you about how to solve this phenomenon?
If you have a stainless steel countertop installed in your home, you must pay attention to the use of stainless steel countertops. Although it is more cost-effective, it will also be cheaper. But the only drawback is that the scratch is easy to see, and it is very difficult to repair, almost no possibility of repair.
Therefore, if there are scratches on the stainless steel countertops in the home, it will be difficult to recover, even if you find a professional master, it will be difficult to restore it to before.
In fact, stainless steel countertops are also divided into many materials, and the more advanced one is Bamberg, so high-end brands use food-grade 304 stainless steel.
It is stronger than ordinary stainless steel. Maintenance is also free of charge every year, so if you choose stainless steel countertops, it is recommended that you buy the Bamberg brand. If you repair the stainless steel countertop, it also requires a relatively expensive maintenance fee, and it is also very good that this brand can repair it for everyone for free.
If everyone's budget is really not enough, it is normal to choose stainless steel countertops. But if everyone's budget is sufficient, it is not recommended that you choose stainless steel countertops, generally like some hotel kitchens will choose stainless steel countertops. But if you install a stainless steel countertop in your home, it will make people feel very stiff and not warm at all, the best thing is to choose a marble countertop, which will look better and not easy to be scratched, even if it is scratched, you can't see it.
-
There's no way to deal with it, it can't be fixed. If it is a relatively slight scratch, it cannot be seen without looking carefully, and if it is too serious, there is no way to repair it, because stainless steel cannot be polished.
-
Usually be sure to keep it dry, avoid long-term soaking in water stains, prevent deformation, scratches are irreparable.
-
You can buy some tin foil and stick it on it so that there will not be so many scratches, and it will get a particularly good protection in the future, and it will not often show the appearance of the countertop.
-
Some oil-repellent tin foil can be purchased online. There will be no scratches on these, and there will be a particularly good protection.
-
The dining table is an indispensable piece of furniture in our restaurant, and now the tempered glass dining table is loved by many consumers because of its simple and generous, easy to clean and high temperature resistance of the material.
1. Use toothpaste: Toothpaste can be used to remove scratches on the surface of tempered glass, but only shallow and smaller scratches are applicable, because there are very fine frosted particles in the toothpaste, which can be filled into the scratch gaps of the glass and can remove the relatively shallow scratches on the glass surface. Rub the scratches back and forth with a damp cloth dipped in toothpaste, and then wipe off the toothpaste on the surface with a dry cloth after the scratches are not obvious.
2. Frosted paper: For shallow and small tempered glass scratches, it can be rubbed by frosted paper, it is best to start with a more delicate frosted paper, if the effect is not good, then choose a rougher frosted paper.
3. Polishing paste: Compared with toothpaste, the effect of special polishing paste will be better, take a polishing cloth or a relatively fine texture of silk, wet it with water, and then wring it out to a state that will not drip water, and then use a damp cloth to dip it in the polishing paste, and polish it in a circular way in the place where there are scratches, pay attention to the grinding strength is not too large to prevent affecting the overall smoothness.
4. Wool wheel: Although the frosted paper can play a role in grinding off the dents, the tempered glass may be ground by the sandpaper to a particularly fine scratch, which affects the appearance.
When the tempered dining table has scratches, it will affect the appearance, so we must take measures to repair it in time, the above methods can be selected according to your preferences, and at the same time, we must pay attention to protection when using the tempered dining table surface in daily life, so as to prolong its service life.
-
You can rub it with toothpaste and newspaper, but it will be there soon. Let's change to a new one, and it's basically no problem to use imports. 1. The surface of the countertop should be kept dry as much as possible, and the refractory board and anti-compact countertop should be avoided from being soaked in water for a long time to prevent the countertop from being deformed.
Artificial stone countertops should prevent bleach and scale in the water from making the color of the countertop lighter and affecting the appearance.
2. Strictly prevent strong chemicals from contacting the countertop, such as paint remover, metal cleaning agent, stove cleaning agent, methylene chloride, acetone (nail polish remover), strong acid cleaning agent, etc. In case of contact with the above items, rinse the surface immediately with plenty of soapy water. If nail polish is attached, use an acetone-free detergent (e.g.
alcohol) and rinse with water.
3. Do not let heavy or sharp objects directly impact the surface; Oversized or overweight utensils should not be placed on the countertop for a long time; Do not rinse with cold water and then scald it with boiling water immediately.
4. Use soapy water or ammonia-containing detergent (such as dish soap) to clean, and use a wet rag to remove the scale and then wipe it with a dry cloth.
5. For knife marks, burns and scratches, if the surface finish is matte, you can use 400-600 mesh sandpaper to polish until the knife marks disappear, and then use detergent and scouring pad to restore the original state. If the countertop finish is mirror, first polish it with 800-1200 grit sandpaper, then polish it with a low-speed polisher at 1500-2000rpm using polishing wax and wool polishing rings, and then clean the countertop with a clean cotton cloth. Moisten the fine white marks with cooking oil and a dry rag and gently wipe the surface.
Definition: The hardware that forms the structure and function of a cabinet. It is divided into hardware accessories and hardware accessories.
1): Hardware accessories: refers to the necessary components (including hinges, handles, connectors, slide rails, hanging yards, shelf pins, adjustment feet, skirting boards, etc.) that constitute the structure and structure of the cabinet.
2): Hardware accessories: refers to the optional components that compose or increase the function of the cabinet (including all kinds of blue pulling, garbage bins, rice boxes, pendants, seasoning racks, corner plates, knife holders, etc.).
A: Multi-function pull basket: The multi-function pull basket has the function of spice pull basket, followed by the storage of kitchen knives and chopsticks, spoons, shovels ......role.
We usually have three to four knives at home, including those who cut vegetables, chop bones, remove meat, and cut cooked food. Sometimes we buy a knife holder in the kitchen utensils market, but we still put it on the countertop, so that it will be smoked by oil and smoke like a spice bottle on the countertop, and if the knife is not wiped dry, it will be put directly into the knife holder, and there will be mold in it. Spoons and shovels are hung directly in the basket, and there is a water tray at the bottom of the basket, so that the cabinet will not be damp.
At the same time, spices, chopsticks, cutting boards, forks, etc. can be placed in an orderly manner. Due to the strong use of multi-functional baskets, customers choose them very commonly, and they are also one of the most important baskets in the whole kitchen.
-
Stainless steel sink rust prevention:
1. Before installation, the yellow muddy water and rust of the cabinet inlet pipe must be drained and flushed, so that the faucet will not be blocked, and the sink can be protected;
2. If it will not be used for a long time, please clean the sink thoroughly without leaving dirt and water stains;
3. Do not use corrosive liquid to clean the tank, although SUS304 has good anti-corrosion performance, it is not invincible. After many removal tests on the rust spots and mildew spots on the surface of the sink, the following methods can effectively remove the floating rust and mildew spots on the surface of the sink:
1 .Remove with talcum powder (double fly powder): put a small handful of talcum powder into the dry sink and wipe it with a dry rag on the rust spots or mildew spots;
2 .Use detergent to remove: put a little detergent on a damp rag, or apply it directly to the floating rust spots or mildew spots, scrub vigorously and rinse with water;
3 .Use toothpaste to remove: squeeze out a small amount of toothpaste on the rust spots or mildew spots in the sink, and wipe it repeatedly with a dry rag;
4 .Remove with rust removal paste (water): Use a dry rag dipped in a small amount of rust removal paste (water) to gently wipe the serious rust part, and rinse it with water immediately.
-
After wiping it off with a rag after each use, apply some oil.
-
If there is a lot, it means that the quality of stainless steel is not good, there is no good way, if there is a place that does not appear in contact with the place, it may be caused by long-term corrosion of salt grains, fine sandpaper can be worn off, and a small scouring pad can also be wiped off.
-
Deal with knife marks, burns and scratches if the countertop is finished.
The requirement is matte, which can be polished with 400 600 grit sandpaper until the knife marks disappear, and then restored with detergent and scouring pad.
If the finish of the countertop is mirrored, first polish it with 800 1200 grit sandpaper, then polish it with polishing wax and wool polishing rings, and then clean the countertop with a clean cotton cloth. For small wounds, use a dry rag dipped in cooking oil.
Just wipe the surface.
There are many reasons for scratches on the countertop, and it will affect the appearance after using it for a long time, so if you are not afraid of trouble, you can ask a professional technician to deal with it professionally, of course, you can change a cabinet.
The cleaning methods of the countertop are not the same, and the cleaning methods of the stainless steel countertop are as follows. >>>More
Which of these two options is better? Although the high temperature resistance and oil resistance of stainless steel countertops are also relatively good, the overall decoration effect is poor, and the stainless steel countertops are easy to scratch small fine lines for a long time, and the aesthetic impact is also easy to breed bacteria. As for individual households, stainless steel processing is expensive, but it also has its obvious drawbacks. >>>More
You are out The most popular and cost-effective is the quartz countertop, which does not penetrate or crack, that is, it is slightly higher, but it is very beautiful, hehe Go quickly.
Stainless steel is more suitable, the solid wood installed before the house is a little deformed in the summer, especially near the stove is also blistered, and then replaced with the best evaluation of Bamberg's stainless steel cabinets, these years have not seen deformation and blistering, fireproof and high temperature resistance This point is indeed not blown. In the past, solid wood was still moldy in rainy days, but now with stainless steel, you don't have to worry about mold.
The production and processing of stainless steel words need to go through a number of strict processes, and its production is more difficult in metal words. First of all, the stainless steel word is to be cut, combined with wire cutting, laser cutting and water cutting. Then weld with a welding torch, then grind and wrap the edge, and at this point the glyph is basically out. >>>More