The house suddenly tripped when it was empty, and there was no power when it was pushed. The sockets

The house is empty.

If there is no power on the sudden tripping push, first check whether the empty incoming line has electricity with a pen.

Measure the two holes, under normal circumstances, one hole is electrified, one hole is not powered, this is normal, and then measure whether the output voltage is normal, if not, it may be an empty fault, replace the empty open.

If you unplug the socket at home, and push it up without power, it means that the main switch of the meter is also tripped when the fault trips, and you should have closed the main switch.

If the empty switch trips, push it up and there is no power, you must first see if the meter box is still empty, and whether it has also jumped. If not, check whether there is electricity in the upper part of the empty wiring, if there is electricity, push it up to measure the wiring of the lower part, if not, the air is broken, if it is normal, there is a problem with the line.

If the upper level switch does not trip normally, you should check whether the upper and lower ports of the tripped switch are loose.

It may be that the empty opening is broken, the wiring is loose or falling

If the circuit of the lamp is a little, it should be the internal tripping of the empty opening Pull the empty handle down to the end to close the brake, and the closing feels strong, just try it.

Somewhere there was a short circuit, the fuse in the power box blew. Ask a community electrician to check it.

There should be a leakage protector, press the special color button and push it again.

It may be that there is a problem with the whole area, so don't do it yourself and hire a professional electrician. Beware of injuries.

Maybe it's a power outage. Ask someone if they have electricity in their home.

Find an electrician, you don't have any testing tools, you can't solve the problem.

Summary. 1. All the sockets at home are out of power, what's going on 1. There may be a power outage, this situation is more common, we can directly call the power supply company, report the fault, request maintenance, it won't take long, maybe you can call. 2. It is also possible that the leakage protector at home has tripped, and once tripped, all the sockets in the home will be out of power.

3. It is also possible that the socket at home is damaged, and once the socket is broken, it will also lead to the problem that it will not be powered on. 2. Why is the ordinary socket out of power and can't close the gate 1. The ordinary socket switch is installed with a leakage protector, but if there is a leakage or short circuit, in this case, it is generally not closed. We need to remove the wires, see if we can reopen the switch, and press the button again to see.

Whether it can be ejected. If it pops up, we can be sure that it is a leakage problem. If it doesn't jump, it's a damage to the appliance.

But if it's not an electrical problem, it's possible that the socket wiring is faulty.

There was no power in the socket after the trip at home.

1. All the sockets at home are out of power, what's going on 1. There may be a power outage, this situation is more common, we can directly call the power supply company, report the fault, request maintenance, it won't take long, maybe you can call. 2. It is also possible that the leakage protector at home has tripped, and once tripped, all the sockets in the home will be out of power. 3. It is also possible that the socket at home is damaged, and once the socket is broken, it will also lead to the problem that it will not be powered on.

2. Why is the ordinary socket out of power and can't close the gate 1. The ordinary socket switch is installed with a leakage protector, but if there is a leakage or short circuit, in this case, it is generally not closed. We need to remove the wires, see if we can reopen the switch, and press the button again to see. Whether it can be ejected.

If it pops up, we can be sure that it is a leakage problem. If it doesn't jump, it's a damage to the appliance. But if it's not an electrical problem, it's possible that the socket wiring is faulty.

After returning home, if you find that all the sockets in the house are out of power, basically because of a power outage or the problem of tripping the leakage protector, and all the sockets are broken, this probability is still relatively small.

After the air switch trips, there is no power when pushed up, and it may be a short circuit or a leakage. You can do this by following these steps:

First of all, turn on the WLAN of the mobile phone, and by observing the "WLAN list", you can know whether the entire floor is out of power, turn on the main switch of the electric switch, and check whether there is power in other rooms that have not tripped; Then turn off the main switch, turn on the switch that has tripped separately, and finally turn the main switch back on.

You can also go to the electrical box of more than Li Chonglou to close or restart your own electric switch; Or find a property or professional electrician to visit the door.

Extended Scrambling:

Air switch function:

Under normal conditions, the armature of the overcurrent tripper is released; In the event of a serious overload or short-circuit fault, the coil connected in series with the main circuit will generate a strong electromagnetic attraction to attract the armature down and jack the locking hook, so that the main contact is disconnected. The undervoltage tripper works on the contrary, when the voltage is normal, the electromagnetic suction pulls the armature and the main contact is closed.

In the event of a severe voltage drop or power failure, the armature is released and the main contact is disconnected. When the power supply voltage returns to normal, it must be re-closed before it can work, and the voltage loss protection is realized.

Encyclopedia - Air Switch.

Summary. Hello, I am very happy to answer for you, the leakage switch trips after the closing is not powered, most of the switch on the switch has tripped, if you are in the switch box has not jumped the switch should be found on the upper level of white, find the switch that has tripped.

Hello is very happy to answer for you, leakage switch tripping after closing noisy resistance to no power, most of the switch on the switch has jumped reed finger brake, if you are in the switch box has not been jumped to ask the switch should be white on the upper level of search, find the switch that has tripped, close on the good rise of the spring.

The upper gate has been pushed up, and now the lighting is powered, and the socket is out of power?

The power supply of the lamp and the socket is not on the same branch, they are controlled by two air switches. So, when the switch that controls the socket of the hood trips, the light is still on, although the socket is out of power. The electrodes in the socket are detached from the connecting wires, causing the wires to have electricity, but there is no electricity on the electrodes, and the electrical appliances cannot work when the combustion carrier is plugged into the electrical appliances.

Produces the phenomenon of lights on but no power at the outlet. The power supply wire of the socket is in the wall, and the wire is broken due to the qualitative change of the house, such as the cracking of the wall, etc., which eventually leads to the lack of power in the socket.

Oh! Did I dial all the sockets and go up from the new brakes, or did the sockets have no power? <> it should be that the socket is not properly connected.

Recheck it and see.

Summary. Hello.

Now that you have no power, are you sure that the empty opening is pushed?

The house suddenly tripped when it was empty, and there was no power when it was pushed. The sockets at home are all unplugged, or there is no electricity?

Hello, now that there is no power, are you sure that the empty opening is pushed?

Normally, if there is no short circuit, the empty opening will be closed, and there will be no power.

Yes, yes, yes.

Do you have electricity in the neighborhood?

The latch is dead, the lamp is powered.

Oh, that's where the wall has a short circuit. Causing the entire line of the ridge branch to trip. and after the gate.

There is also a problem with the wall plug. So there is no electricity. It is recommended that you find a property electrician tomorrow to come and see the sales.

It's so late that it's not safe to check the trail yourself.

Find the wall plug in your home and pull the gate down.

Don't close it. If you have a lighting, just stick to it. Find someone tomorrow to come and see [Bixin].

Summary. This question is up to me, it takes a little time to type, so please be patient.

The air at home suddenly tripped, there was no power when pushed up, the sockets were unplugged, there was still no electricity, air conditioning, lighting had electricity, but the socket was out of power.

This question is up to me, it takes a little time to type, so please be patient.

How's it going. Hello, I am glad to answer the problem for you, if it is an empty open with leakage protection for rent, it depends on whether there is a leakage indicator button on the leakage protector after tripping. If it pops up, it means that the wiring or electrical appliances in your home are not well insulated and there is a leakage place.

Helio hopes that my answers will be helpful to you