The socket at home suddenly ran out of power, but the lights still worked, how to get this?

1. Check the air switch from the control socket circuit.

Whether the inlet wire end of the wire connected to each socket is not in good contact, such as whether the connecting wire end of the air switch connected to each socket is falling off or oxidizing, and whether the connecting screw of the thread head is tightened.

2. If you check whether the air switch has tripped.

If there is a trip, there may be an overload or short circuit in the circuit. So first unplug the many electrical appliances in the house, try to close the air switch, if it jumps, it means that the line has a short circuit, if it does not jump, it means that the line is overloaded or some household appliances are short-circuited, or even leakage.

3. Use an electric pen first.

Detect the socket, if the empty neon bubbles are lit, it means that the neutral wire is broken, and if the empty neon bubbles are not lit, the live wire is broken.

The household electric light is on and the socket is out of power, generally the leakage protector has tripped, and the tripped switch can be found in the switch box to use electricity. If the brake cannot be closed, there may be a fault of leakage or short circuit, and the fault must be eliminated before closing.

The socket at home suddenly ran out of power, but the light can still be used, which means that the circuit of the socket is broken, buy a new socket, and ask an electrician to help replace it.

First of all, check whether the wiring of the socket is loose, or whether the two copper pieces of the socket are not in good contact? Open the socket and take a look.

The socket at home suddenly ran out of power, but the lights still worked, how to get this? In this case, the power cord of the socket may be disconnected at the place of connector, and the upper cover of the socket should be opened to take a look.

If your home outlet suddenly goes out of power, but the lights are still working, it means that your outlet may have failed and needs to be repaired or replaced.

If the socket in your home suddenly runs out, but the lights are powered, it means that your outlet has tripped or the socket wire is burned. Only in these two cases will your outlet run out of power.

Nowadays, the electrical wiring socket and the lamp are basically not the same circuit, first: you should first check whether the circuit breaker is tripped, and second: then check whether the socket is broken.

The socket is generally in poor contact, it is recommended not to check and repair it privately, you need to find an electrician to help test and repair.

The socket at home suddenly ran out of electricity, but the electricity can still be used, how to get this medicine? I think there may be a short circuit in the wires in your socket. Maybe the wire inside the socket is burned out and needs to be replaced.

The socket at home suddenly ran out of power, but the light still works, which means that the socket is broken, and it would be good to buy a new one.

There may be two situations for this, one is that the short circuit is tripped, because the lighting and socket in the home are separated, and the outlet is out of power, and the light will still be on. There is also a possibility that the socket is burned out.

The socket and lighting are not a branch, find out whether the control switch of the socket line trips; If there is no trip fault on the socket, it may be that the socket is disconnected or the contact fault is poor.

The empty opening of the socket and the empty opening of the electric light are not a loop, first see if there is electricity in other sockets, and then open the power control box to see if there is any empty tripping, step by step.

There may be a problem with the socket line, or the special line that controls the socket is empty and there is a short circuit tripping, it is recommended to find a professional electrician for maintenance.

The socket at home suddenly ran out of power, but the light can still be on normally, it is recommended to check whether the control switch of the switch socket has tripped.

If you plug an electrical appliance into a socket and it doesn't work, it doesn't necessarily mean that the socket is out of power, and in more cases, the appliance itself is broken. If the socket is measured with a voltage tester and shows that there is no power, it means that the socket is out of power. At this time, it is necessary to check that the line is disconnected from the beginning of **.

The circuit of the socket and the circuit of the lamp are two circuits, and you check whether the brake in charge of the socket circuit has tripped.

Hello: The new blueprint lighting is now a separate circuit. The sockets of kitchen, bathroom, air conditioner and water heater are all separate circuits, check whether the leakage protector of the indoor switch box trips? Or is the socket damaged?

If the socket in the house suddenly goes out of power, but the lights still work, then we have to change the socket.

The socket at home suddenly runs out, and the light is still powered, it may be that your socket and the light are not in one. on one line.

This is where the socket in your home is connected, maybe it's disconnected, or maybe this socket is broken.

If there is no power in some sockets, it should be that the switch is tripped or the switch is broken, or it is possible that the line is broken, if there is no power in one socket, it means that the wire in front of the socket is broken, the socket wire is loose or the socket itself is broken.

The lamp and socket are controlled by two switches, it should be that the socket switch tripped, you need to unplug the electrical appliances used at the time and then close them to see if they return to normal, if they return to normal, you need to check whether the electrical appliances used at the time have a short circuit fault, if there is a peculiar smell, it is best to send it to the home appliance maintenance office for maintenance, to be put into use again after eliminating the hidden danger of short circuit.

Check whether the wiring is normal, and there is also a socket wiring whether it is loose or loose, which is easy to find.

How to fix the socket at home if there is no electricity + the lamp has electricity.

1. Look at the function of the switch when checking, if there is a "self-reset overvoltage and undervoltage tripping" on the branch switch of the socket circuit, it may lead to the power failure of the line, but there is no tripping. At this time, it needs to be manually reset and wait for about a minute to restore the power supply. 2. The socket itself needs to be taken into account.

If there is no fault in the distribution box, or if the individual socket is out of power, then it is necessary to focus on checking the socket. Open the socket to check the wiring at the back, and carefully observe whether there is any slippery wire, disconnected wires or not fixed properly. After confirmation, start testing the wire, and then determine whether it is a problem with the socket or the wiring.

3. The last point is the line problem, at this time you need a multimeter, which is used to test the voltage between the neutral line and the live wire. Data viewing is very simple, if the voltage is 220V, the line is normal, just replace the socket; If the voltage is shown as 0, or only a few tens of volts, it means that there is a problem with the line. Then find the connector closest to the dead socket, and use the buzzer of the multimeter to measure the neutral line of the dead socket to the connector.

If there is no beep, then the wiring needs to be replaced; If there is a beep, it means that the line is okay and the connector needs to be reconnected.

All the outlets in the house are out of power, but the lights are on what is going on.

Hello dear<>

The answer you are looking for: All the sockets in the house are out of power, but the lights are powering for the following reasons1

This is usually due to a short circuit in the electrical cord of the power plug, whose socket is not on the same line as the lighting fixture. 2.If there is a line fault in the power socket, check whether the power switch is short-circuited, and if so, please replace it with a new power supply.

3.If the socket is old, one socket will be out of power, but the light will be electric. 4.

The power plug is not turned on (some plugs have an automatic control switch). 5.A dedicated voltmeter is used to measure whether there are wires inside the plug.

If there is a problem with the outlet, it will also cause a power outage. If the wires of the power plug are burned, the internal power supply will be de-energized. 6.

If it doesn't work, the fuse is broken and have an electrician repair. The above is my reply to you, if you think my reply is good, please move your fingers to give me a five-element like<>

The lights at home are electric, but the sockets are all out of power, and the air switches are not tripped.

The solution is: if the power box of the sub-household fails, you need to contact professional maintenance personnel in time to overhaul or replace the sub-household power box, which can solve the situation that the socket has no power.

Looking at the switch function, if the branch switch of the socket circuit has the function of "self-resetting overvoltage and undervoltage tripping", it may lead to the situation that the line is powered off but does not trip. In this case, it is common to wait up to 1 minute for the power supply to be restored. However, it cannot be ruled out that the self-reset function of the overvoltage and undervoltage tripper is damaged, resulting in the inability to automatically restore power supply.

In this case, it is necessary to replace the over- and undervoltage trippers with new ones.