Draw up a steel structure contract for housing and elevators

That's with **, 1 of ** is:,27184,473,60,2,8,7,100);

How to use; Open your QQ space, click "Dress up space", enter what you want in the address bar, press enter, click Custom, and then move the next module slightly and then click Save. ok..

The feasibility study report is the feasibility study report.

From your text, it should be understood that elevators should be added to existing buildings, which belongs to the architecture profession.

There are a lot of documents on the feasibility format.

But it is not easy for a layman to write this thing, and it is not easy for Jianpei to write sincerely.

Are you a factory owner who needs to design? Or does the developer need to buy?

Is it the cost of elevator decoration?

The general process is that the customer selects the brand (including the previous inspection), pays according to the contract, the factory design drawings, the production cycle produces the finished product, the outbound delivery, the installation and delivery and after-sales maintenance (including the acceptance of the Quality Supervision Bureau).

The design cost you said should be included in the total price of the elevator, if you are not satisfied, you need to find a third-party elevator decoration company, then the cost will be charged separately. Generally, the ladders made in our Sini are rarely decorated for the second time, and they are all done according to the preferences and requirements of customers.

Elevator equipment and installation! About 160,000! The hoistway is counted separately!

Generally around 400,000.

When installing elevators, in addition to the first subsidy, the money is raised by the residents themselves, and different floors are different. After checking the data at that time, when Xinmin Village installed an elevator at that time, the proportion of capital contribution was agreed:

There is no need to pay for the first and second floors, 10% on the third floor (25,500 yuan for one household), 20% on the fourth floor (51,000 yuan for one household), 30% on the fifth floor (76,500 yuan for one household), and 40% on the 6th floor (102,000 yuan for one household).

The old building is equipped with an elevator, the first floor does not need money, and the second floor and the upper floor are apportioned on the basis of 10,000 yuan, and 5,000 yuan is added for each additional layer, and the remaining ** subsidy.

Those who say tens of thousands, hundreds of thousands, and two hundred thousand are all nonsense. Design + civil construction + steel structure engineering + domestic first-line brand elevator equipment engineering + exterior decoration + inspection, according to the normal situation estimated overall cost of about 460,000, the installation of elevators in old buildings is very complicated, are formed in the old community, many on-site water supply, heating, natural gas, septic tank, building and elevator spacing will affect the cost of the project.

Depth, etc., and before doing the elevator steel structure, you must apply to your local civil engineering bureau to install the elevator, after the application is passed, the steel structure, the elevator all need to cost, the elevator according to the brand ** in the hundreds of thousands to more than 200,000 yuan, the general new elevator is included in the installation can, external elevator? It should be to install an elevator outside the floor, which is the first to do the steel structure of the elevator, and you can consult the parameters of the elevator now to determine the width of the hoistway.

Old buildings, that means there is no elevator shaft.

The cost of adding an elevator to the hoistway (concrete or steel structure) is about 200,000 yuan.

Elevator shaft:It is the space for the movement of the car and the counterweight device or (and) the plunger of the hydraulic cylinder. This space is bounded by the bottom of the hoistway pit, the hoistway wall and the hoistway roof.

Elevator:

It is a type of vertical lift powered by an electric motor, also known as a vertical elevator, commonly known as " in Malaysia, Singapore and Hong Kong " vertical elevator is equipped with box-like pods for multi-storey buildings to carry people or goods. The elevator also has a stepped type, and the tread board is installed on the track for continuous operation, commonly known as automatic elevator, also known as electric escalator, pedestrian elevator, escalator, etc.

Tens of thousands of dollars or so.

Generally speaking, it is around 70,000 yuan.

My friend's new house is equipped with more than 100,000 shaft elevators.

Look at the specific elevator brand, the first and second line brands will definitely be more expensive, but for safety reasons, you can take a look at the second line of brands, such as the second line of Kangli, Sini quality and ** are still good.

About 400,000.

Repair of corridor bridges, selection of elevator products, external structural materials, etc., these factors should be considered.

There is a lot of choice, so it depends on the actual situation.

About four or five hundred thousand, depending on the height of the floor, generally speaking, the cost of installing elevators in old buildings is much higher than that of new floors, and it is difficult to build and reinstall. The cost should be partially subsidized by **, and partly shared by the residents of the floor.

The cost of installing elevators in old buildings is much higher than that of general buildings, which is a relatively difficult thing. Generally, it is necessary for the owner to communicate well with the property in the community, if the reason for the need to install an elevator is that the property is not done well, then you can also ask the property to share part of the money.

The cost of installing elevators in old buildings is about 300,000 to 400,000 yuan. The cost** may be partially subsidized, and it is more reasonable for residents to share it according to the floor, and it can also reduce some conflicts.

Within 250,000 yuan, this is the upper limit of installing elevators. The cost is shared equally among the households, and it can be shared according to the frequency of each household's use of the elevator.

The cost is about 100,000, and the cost is shared equally by the residents, and the residents on the first floor may participate (this has to be discussed) After all, the residents on the first floor cannot use the elevator.

Is there a subsidy for installing elevators in old buildings?

The cost of installing elevators in old buildings is more reasonable to apportionment by floor. According to the Zhongshan Investigation Team of the National Bureau of Statistics (hereinafter referred to as the "National Central Survey") DAO visited a residential community with a successful case of elevator installation, visited a total of 50 permanent households, and collected residents' willingness and difficulties in installing elevators in old buildings, and the results showed that 46% of people recognized this apportionment method.

The cost of installation is the primary problem, and the cost of sharing the cost by floor is the mainstream view.

Among the factors affecting the willingness to install elevators, the first factor is still the most concerned. Thirty percent of the respondents said that if they decide to install elevators, they will first consider the cost of elevator projects, hoping to keep the cost as low as possible, and have to give up once they exceed psychological expectations.

Due to the different degrees of demand for elevators on each floor, as well as the impact of ventilation and lighting that the installation of elevators may bring, there have been many controversies on how to achieve fair and reasonable cost sharing for installation. Half of the respondents believe that the difficulty of agreeing on cost sharing is the primary reason hindering the installation of elevators.

According to the survey, 46% of the respondents believe that the floor price difference must be reflected. 22% of the respondents believe that in addition to floors, other factors should be considered, such as their own economic ability, the area occupied by the installation, the impact of ventilation and lighting, and the purchase of multiple houses in the same building by one household. 16% of the respondents believe that it is relatively reasonable to use floor plus area as the main apportionment factor.

Judging from the feedback of the interviewees, the respondents all hope to maximize their own interests and are unwilling to make concessions, which is easy to cause the dilemma of the three monks having no water to drink in the repeated game. Overall, however, the idea of splitting costs by floor is one that respondents agree with.

It can also be apportioned according to the number of layers. For example, each household on the second floor is counted as half a floor, each household on the third floor is counted as one and a half floors, each household on the fourth floor is counted as two and a half floors, each household on the fifth floor is counted as three and a half floors, and each household on the sixth floor is counted as four and a half floors. There are two households on each floor, and the 12 households of such a unit bear a total of 25 floors, and then the total investment is divided by 25 floors to get a number, and then each household multiplies this number by the number of floors divided equally, which is the cost that should be shared equally by each household.

In fact, this method is apportioned according to the height of the floor.

The National People's Congress on the issue of home care for the elderly, put forward the existing building to install elevators, convenient for the retired elderly to go up and down the stairs, Beijing, Shanghai, Nanjing, Fuzhou, Hefei and other cities have introduced corresponding policies, some areas need 100% consent of the unit owners, which increases the difficulty of adding elevators to existing buildings.

The total cost of installing elevators is about 470,000.

Material declaration: personnel cost of about 10,000 yuan; The design cost is about 10,000; Pipeline line transformation: about 20,000; Elevator shaft plus installation:

about 10 tons, 80,000; Glass curtain wall: 130 square meters, about 60,000 yuan (coating plus double-layer lamination); Elevator plus 10-year maintenance: 180,000 + 40,000 (the elevator is one of the top ten international brands); 10,000 in the later period; 20,000 elevator corridors (six-storey three-station type); Others: 20 thousand.

Elevator is a profiteering industry, especially the installation of external elevators in old communities, elevators are not high-tech products, but not as common as rice and white flour, so the people have no way to know its real **, plus contractors and **** layer by layer of price increases.

The installation of elevators in old buildings must be safe and quality, and the most important thing is the hoistway, the hoistway is done, and the elevator only needs to be installed by the manufacturer. All or choose the strength of the builder, the elevator of our building has more than 20 meters of corridor, but also the stairs to transform into a flat floor into the house, the elevator is Hitachi brand, now it has been built, we choose Guangdong Jiajian. No. 99-105, Jinming Street, Tianhe District, Guangzhou.

First of all, which side are you?? If you are the construction unit, you will have the general contractor supervision and acceptance, if you are the general contractor, the sub-project should be the supervision and acceptance, it seems that there is also the acceptance of the four parties, if you are Party A, it is the quality supervision station.

Of course, it must be connected with the main body of the original structure in order to be stable. What is a soft connection, spring, aren't you afraid that people will walk up and shake from side to side.

It can be directly connected to the original structure (either a stressed structure or a reliable envelope) and is considered as a hinge when calculating.

You don't need to connect, but it's better if you can.

For the size of the elevator steel structure, you mean that the steel structure reserves the width and depth of the elevator shaft, or the size of the steel structure itself, for the size of the steel structure reserved elevator shaft, I suggest that you consult the elevator factory that provides you with elevator equipment, and ask them to issue an elevator civil drawing, and to reserve the size of the steel structure shaft and the spacing of the ring beam, etc., in addition to the size of the steel structure itself, the size of the profile used, you can ask the elevator factory to recommend the use of profile model, according to the tonnage, The use of profiles is also different, the elevator factory will generally give a reference profile model according to the empirical value, and if you want to be more rigorous, you can calculate the fatigue strength of the steel structure according to the load.

In addition, this kind of thing is still left to professional people to do. Either the big package to the elevator factory to do, or ask a professional steel structure unit to do it, otherwise, it is very troublesome to go wrong. . .

The elevator design drawing is used to determine the size of the hoistway.