How to turn off wifi and data at the same time

Hello. Nowadays, everyone's life is basically inseparable from mobile phones, but also inseparable from the network, whether it is wireless wifi or traffic has become a must-have in our lives. In the case of wireless wifi, we generally give priority to connecting to wireless wifi, after all, 4G consumes too much data, and it can't hurt to watch dramas and games.

Fortunately, almost every place now has wireless wifi, but many friends still have questions in their hearts: when using wireless wifi, do you need to turn off mobile data? If I don't turn off my mobile data, will it consume data?

I'm going to explain it to you today.

First of all, wireless wifi and mobile data are two different frequency band signals, which will not conflict with each other, so even if they are turned on at the same time, it will not have any impact on the Internet speed. Secondly, there will be an accurate theoretical algorithm in the background of the mobile phone, that is, in the case of connecting to wireless wifi, the mobile phone will automatically give priority to the use of wireless wifi network, so there is no need to worry about the situation that data traffic is still used when there is wireless wifi. Therefore, when using wireless wifi, it does not matter whether you turn on mobile data or not.

But! If the wireless wifi signal is weak or unstable and easy to be interrupted, the mobile phone network will automatically switch to continue to provide Internet service functions when the mobile data is on, so that you may use the traffic to finish the TV series; **When updating the use, if there is no setting only under the wireless wifi**, you may turn on the traffic to update the use of a few G, just ask you if you are scared?

Therefore, in order to avoid the above situation, it is best to perform the following operations on the mobile phone. Set up an automatic reminder when wireless wifi is disconnected: go to the mobile phone [Settings] - [Mobile Network] - [WLAN Mobile Data Connection Switching Prompt], and select [Prompt to use mobile data connection], so that the mobile phone will be alerted when switching mobile data networks to avoid consuming data.

The second is to restrict the use of market application traffic**Update use: Open [Use Market Store] - [Settings] - [Automatic installation under WLAN] - [Prompt]. In this way, whether it is when watching dramas, or when updating** use, you can avoid over-use of 4G traffic.

Of course, to be on the safe side, you can turn off your mobile data when using wireless wifi. However, in this case, you may not be able to receive the message in time if the wireless wifi network is not good.

Good luck.

Take the Huawei P40

Mobile phone, EMUI10 system as an example, turn off wifi and mobile data at the same time to use the method:

1. First turn on the phone, then find the "Settings" function on the desktop of the phone, and click to enter.

2. In the settings interface, find "Mobile Network."

option and click Enter.

3. After that, click on the "Network Acceleration" option in the mobile network power disturbance type and enter.

4. When the network acceleration function is turned on, the wifi and mobile data will be used at the same time during the use of the mobile phone, at this time, you only need to click the button behind the "network acceleration" to turn off the network acceleration function.

Note: The operation methods of different brands and different systems may be different, and you can understand the functions of the mobile phone in detail before operating.

Take iphone11, ios13 system as an example:

At present, the iOS system of the Apple mobile phone is a leased air system, and there is no function to turn off wifi and mobile data at the same time, but it can be achieved by turning off one of the functions. If you only want to use the wifi function, you can go to the "Settings" function in the Apple phone, and then turn off the "Cellular" function. If you only want to use mobile data, you can enter the "Settings" function in the Apple phone, and then turn off the "WiFi" function.

Brand model: Huawei P40

System:How to turn off the bright rental when using wifi and mobile data at the same timeLet's find out how to turn off wifi and mobile data at the same time.

1. First of all, open the settings and select Mobile Network.

2. Then select Fiber Network Acceleration on the Mobile Network page.

3. Finally, turn off the activation option on the right side of network acceleration to turn off this function.

The above is how to turn off Huawei when using WiFi and mobile data at the same time, I hope it will be helpful to you.

If you are using a vivo mobile phone, our mobile phone supports turning on the data network and wifi network switch at the same time, if you connect to wifi and turn on the data network at the same time, the wifi network is preferred. You can enter the spine hall stupidly to set up Sakura accompaniment --WLAN--Network Assistant--Data Network Acceleration,Turn off this function,When the wifi signal is poor,The network will not be used at the same time to increase the volt speed。

If you have more questions, you can enter the vivo official website vivo**app--my--**customer service--slide to the bottom--**customer service--enter manual customer service to enter the consultation and understanding.

Method: The first step is to open the Huawei P30 and click on the settings of the desktop, as shown in the figure below

Please click Enter a description.

Step 2After going to Huawei P30 settings, touch Wireless & Network, as shown in the figure below

Please click Enter a description.

Step 3In the Huawei P30 wireless and network settings, touch WLAN, as shown in the figure below

Please click Enter a description.

Step 4: After going to the Wi-Fi settings of the Huawei P30, click the three-dot icon and select Wi-Fi +, as shown in the figure below

Please click Enter a description.

After the fifth step, turn off WLAN+, and successfully turn off the problem of using Huawei P30WiFi and mobile data at the same time, WLAN+ has a function that can use mobile data traffic when the WLAN network is not good, as shown in the figure below:

Please click Enter a description.

Turn off wifi and traffic, use it at the same time, you can find wifi and traffic in the settings of the phone to turn it off, or you can swipe down the notification bar of the phone to turn it off.

If you want to turn off the wifi and use the data, then you can turn it off by clicking on the wifi, but it is impossible to use it at the same time.

Hello, friends, it's okay to turn off wifi and use data at the same time, but which one has a stronger signal and which one will be used, I hope it can help you.

Turn off the wifi and use the data at the same time, this should be able to turn off a wifi directly, which should be able to directly refer to the use of one, which is also very good.

This is very simple,You directly click on the wifi above,After turning off the wifi for him,Click directly on the traffic data,You can use it directly when you turn it on。

Today's 5G mobile phones and some mobile phones have mobile data acceleration function, if you want to turn it off, in the wireless network settings, choose to turn off mobile data acceleration.

Hello, this situation can be set in your own traffic, and you can set it off.

Turn on your phone and then set it in the settings to turn off your Wi-Fi.

This cannot be used at the same time, only the same or wifi can be used.

Go to Settings.

Find wifi and data.

It's good to do the closing.

How do I turn it off? w has traffic to use at the same time, just turn it off and off.

Disabling the Internet access of networked devices under the same WiFi network can be achieved through the whitelist filtered by MAC.

Ways to whitelist allowed users and prevent unauthorized devices from connecting to the Internet:

1.The system is connected to wifi.

2.Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface.

3.Go to the DHCP client page and view the host name. Record the licensed device hostname and its MAC address.

4.Go to the router security settings interface, click MAC address filtering, and enable the whitelist function.

Select Allow Only, enter the MAC address of the permission and mark the comment, and click Enable to make the whitelisted devices accessible online.

Routers generally have this function, which can be viewed directly.

Some routers have their own shielding function, and you can choose to allow only a few MAC addresses to log in.

Method steps.

The first step is to open the Huawei P30 and click on the settings of the desktop, as shown in the figure below

Please click Enter a description.

Step 2After going to Huawei P30 settings, touch Wireless & Network, as shown in the figure below

Please click Enter a description.

Step 3In the Huawei P30 wireless and network settings, touch WLAN, as shown in the figure below

Please click Enter a description.

Step 4: After going to the Wi-Fi settings of the Huawei P30, click the three-dot icon and select Wi-Fi +, as shown in the figure below

Please click Enter a description.

After the fifth step, turn off WLAN+, and successfully turn off the problem of using Huawei P30WiFi and mobile data at the same time, WLAN+ has a function that can use mobile data traffic when the WLAN network is not good, as shown in the figure below:

Please click Enter a description.

As long as only the wifi is turned on, or the traffic, the two can be used at the same time.

Turn off the traffic button when you turn on wifi.

WiFi and mobile data are turned on at the same time, and there are two scenarios:

1. If the wifi is turned on, but there is no hail core, the network will use traffic.

2. If wifi and mobile data are turned on at the same time, wifi will be used first.

Problem analysis: 1. According to the design of the mobile phone system, the priority of Wi-Fi is higher than that of mobile data, so when the mobile source ridge mining data and the Wi-Fi network are connected at the same time, the Wi-Fi network is used by default.

2. However, when the connected Wi-Fi network cannot be connected to the Internet, the system will automatically use the mobile data to connect to the Internet.

3. But this is not absolute, for example, the push notification software in the iPhone will use mobile data, even if the Wi-Fi is connected. And when the security software in the phone prohibits the software from using the Wi-Fi connection, the software will also use the data.

4. Therefore, when the Wi-Fi is connected, if you can access the Internet normally, you will not use mobile data traffic, but when the connected Wi-Fi has a problem and cannot access the Internet, the system will automatically use mobile data to connect, and the traffic will be used at this time. It is recommended to turn off mobile data after connecting to Wi-Fi to prevent traffic from being stolen and to find Wi-Fi network connection problems.