Novice driving on the road skills, novice driving tips on the road

Here's how to get started quickly by a novice driving car:Novices drive on the road because of the actual road vehicles coming and going, and the environment is complicated. It is very easy to be nervous when driving on the road, and because you are not familiar with the operation of the vehicle, it is common to press the brake as the accelerator, so many novice drivers are afraid or even refuse to drive on the road.

Determine the location of the car:

Many novices drive on the road and don't know how to drive. First of all, when driving in the early stage, try to keep the vehicle in the middle lane, so that the route will not become complicated because there are steering lanes on both sides; Second, you can exercise the courage of novice drivers first, and driving for a long time in the middle lane is conducive to reducing tension.

Here are some tips for novices to drive on the road:

One: Adjust your driving position.

Correct driving posture is very important for safe driving, which can not only eliminate the fatigue of long-term driving, ensure good driving vision, but also make driving actions more accurate, fast and reasonable. The driving posture is mainly related to the steering wheel and seats. Once in the driver's seat, you should first sit deep behind the seat with your waist and shoulders resting on the back.

Feel the right distance between the front and back of the seat and the angle of the backrest, then extend your arms forward and naturally hold the sides of the steering wheel. In this case, the wrist must be able to bend freely and move freely. There should be a certain amount of room for movement in the legs, and it is effortless to press the clutch pedal, brake pedal or accelerator with your feet, and the body does not have to lean forward, so the position is basically suitable at this time.

Don't be overly nervous when driving, many novices often feel back pain after the first time on the road, mainly because of the wrong sitting posture and excessive tension of the body, so that the whole body stiffens and competes with the car, and back pain is inevitable. Do not always maintain a single position to drive during driving, and adjust your sitting posture appropriately to eliminate fatigue.

Two: Familiarize yourself with the gears.

The vast majority of novices are new to the road when they first start driving in a different type of car than they were when they learned to drive, so they are unfamiliar with gears. If you don't take the time to familiarize yourself with the gears, caused'The direct consequence is that you don't know how many gears you are in when driving, and you often look down at the gear lever, which is easy to cause traffic accidents due to distraction. Especially when encountering complex road conditions, due to tension, it is easy to hang the wrong gear and cause the ignition to stall, so you must be familiar with the gear before going on the road for the first time.

Usually the position assignment of the gears is clearly printed on the handle of the gear lever, and when you get into a car that you are not familiar with, familiarizing yourself with the different gears is the first step.

1.Follow the car: It is essential for a novice driver to drive a car.

Novice drivers need to keep a safe distance from the car in front when following the car, and pay attention to whether the car in front will brake suddenly in order to prevent rear-end collision. 2.Judge in advance:

Novice drivers have a poor sense of the car when driving, and they need to judge the driving situation around them in advance. Look around through the rearview mirrors,** suspicious colors or objects that may appear in front of you to ensure safe driving. 3.

When driving on the road, there will be a large number of objects that block the view and hinder the driver's judgment of the road. If you can't determine the road conditions, you should slow down immediately and make emergency preparations to prevent travel accidents and unnecessary damage inspections. 5.

Plan your driving route: Novice drivers need to plan their driving routes when driving. Because novice drivers are not skilled in driving, driving may miss road signs.

Driving at junctions is more likely to miss road signs. They need to plan in advance to prevent the phenomenon of unclear road vehicle maintenance network lines when driving, which increases hidden dangers to driving and cannot ensure safe driving. 6.

Speed Adjustment: Adjusts the speed of the engine. Novice drivers must try to avoid sudden braking and acceleration when driving.

When decelerating, they can adjust the speed of the engine between 1600-1800 rpm without the need for braking. 7.Use the lights:

Use lights flexibly when driving, and accurately use fog lights, width indicators, low beams, high beams, and turn signals. Not only can the defeat be able to light up the ground, but also improve your safe driving.

1. Learn driving skills to control the speed

First of all, it is necessary to understand what kind of speed is the most appropriate, too slow and too fast are not good, too slow will affect traffic, too fast will violate traffic rules, generally speaking, 60-80 yards is the safest and most moderate. The most important skill to control the speed between 60 and 80 yards is to step on the accelerator'Strength, novices are often prone to slamming on the accelerator, and the speed will suddenly jump and cannot maintain stability. Drivers should feel the relationship between throttle strength and speed according to different models, and develop the habit of stepping on the throttle slowly to keep the speed stable and moderate.

2. Shift skills to learn driving skills

The car shifts to 2nd gear after starting and 3rd gear at around 40 yards. One of the tricks of gearing is to distinguish the engine sound, which is loud at high and low speeds, and at high speeds, on the contrary, the engine hums.

3. Learn to drive in neutral gear

Neutral is used for temporary stops, such as when waiting for a red light for a long time, and using the foot brake will cause damage to the brake pads and gearbox, so neutral gear should be applied at this time. However, neutral gear is suitable for straight roads and is not suitable for use on slopes with large angles.

4.Learn how to drive your car to the curb of the street

Driving your car on the curb is usually the solution when there is a shortage of parking spaces on the street. When driving the car onto the curb, do not drive on both wheels together, but on one by one to avoid damage to the suspension system. Also, when it comes to the lower edge, the best way is to go down from the side.

Going to the curb is a last resort when encountering special circumstances, if there are no special circumstances, it is not recommended to go to the curb for a long time"Condensation"clutch, which can easily damage the vehicle.

Driving skills in real life are not something that can be learned, but need to be summarized little by little in the long-term accumulated driving experience, and slowly experienced, novices are always a little stiff when driving, but as long as you practice a lot, you will also sum up the driving skills that suit you.