How to turn off the Blue Screen Repair Function in Win7?

First: First of all, open the "Guardian";

Second: Open the Settings Center

Third: Click "Settings Center" and find "Bug Fix" and open it;

Fourth: After opening "Funnel Repair", find "Other Settings", find "Turn on Blue Screen Repair Function" in "Other Settings", then uncheck this feature in the front box, and then click Confirm Top; If you still want to restart, follow steps 1 to 3 above and do it again, but in the fourth step, please check the "Blue Screen Repair Function" instead. I hope it can help you.

Method 1. 1. The most common notification is to change the BIOS settings. Press F10 to enter the BIOS settings while booting up.

2. Press the Advanced option, then click to the IDE configuration item, and press Enter to enter.

3. In the same way, use the keyboard to select SATA OperationG Mode, then select Compatible, and click Enter to enter.

4. Press F10 to save the settings.

Method two. 1' Another way is to change the type of hard disk interface. Also press the F10 key at boot to enter the BIOS settings.

2. Select the storage menu, then select storage options with the keyboard, and click Enter to enter the modify hard disk mode.

3. Use the keyboard to select the hard disk mode to adjust from AHCI to IDE.

4. Similarly, press the F10 key to save.

Fang Na Que Ming Fa III.

If you still get a blue screen of death error after changing the dios settings, it may be because the hard drive controller is not automatically recognized: if you are using a non-genuine operating system disc, the disc automatically loads the hard disk controller driver that does not meet the needs of the computer. So it leads to a blue screen on the computer.

In this case, it is recommended to change to a genuine disc and install the operating system. I recommend Ghost Win7 SP1*64 Flagship Driver Enhanced Edition) to everyone.

win7 system computer if the computer has a blue screen,First of all, you must figure out the reason for the blue screen and try to fix it,360 blue screen repair function is very useful,By default,win7 system 360 blue screen repair function is turned off,If you use it, how to turn on the 360 blue screen repair function? Today, I will bring you the spine method of turning on the 360 blue screen repair function in the win7 system.

Recommended:

How to turn on the 360 blue screen repair function in win7 system:

1. First turn on the 360 security guard;

2. Find System Repair and open it;

3. Open the vulnerability repair in the system repair;

4. Find Settings in the lower corner and open it;

5. Then find the Enable System Blue Screen Repair feature, check it or blank. This enables and disables the 360 blue screen repair feature.

The above tutorial steps are the way to turn on the 360 blue screen repair function in the win7 system, easily solve the blue screen problem, if you want to turn off the 360 blue screen repair function, you can also turn it off directly according to the above methods.

Reasons for the blue screen:

System files are missing or corrupted.

Poor memory thermal stability, damaged chips, or incorrect settings.

The CPU temperature is too high or the cache is corrupted.

Computer poisoning. There are many conflicts in software.

Abnormal shutdown.

Solution: After booting up, press F8, Enter, Enter, Enter Safe Mode, Advanced Boot Options, Last Correct Configuration, Enter, Enter, Press Down.

Unplug the graphics card and memory module, erase it, use a brush again, clean the slot dust and fan, replace the memory slot, etc.

Check whether there are similar functions, redundant similar software uninstalls, if it still doesn't work, you need to "one-click restore" or "reinstall the system", and finally if it still doesn't work, it is recommended to send it for repair. ，

2. On the system properties panel, click the "Advanced System Settings" option on the left side to open the "System Properties" window.

3. In the "Advanced" tab of the pop-up window, find the "Startup and Recovery" column, and click the "Settings" button to open the "Startup and Recovery" window.

4. In the new pop-up window, remove the checkbox before the "Show recovery options when needed" option, and click "OK" to save the modifications. In this way, when the win7 system is shut down abnormally again at the same age, the boot repair options menu will no longer appear when restarting.

5. If you want to restore the display of the Boot Repair Options menu, you only need to re-check the checkbox before "Show the time of the recovery option when needed".

Question: I can't turn on my computer now, and the boot page keeps showing diagnosing your computer, and then after a while, it pops up, your computer does not start correctly, and rebooting is diagnosing again.

Hello, if you are using an XP system, then you can run msconfig, check the menu of blue screen automatic repair in the tab, and click the delete button.