Waterway transformation is divided into two ways: open pipe and dark pipe, which way is better? Why?

I think if it's in the north, take the dark tube, and take the open tube in the south; Because the winter weather in the north is very cold, the temperature difference between the four seasons is very obvious, but it will be very humid to set up a dark pipe in the south, because the climate in the south is humid.

It must be a little better for the dark tube. This is because the dark pipe will not affect the decoration on the surface, and it will not cause some wire pipes to be exposed, nor will it affect the aesthetics of the home.

In fact, the open pipe is better, the open pipe does not look beautiful, but if there is a problem with the waterway, the open pipe is more convenient to repair, and the decoration of the open pipe is cheaper.

Waterway transformation is divided into two ways: open pipe and dark pipe, which way is better? Why?

The bathroom water pipe is exposed outside the wall during the decoration. Defects: To a certain extent, the open line of the water pipe will affect the overall beauty and generosity of the toilet.

The bathroom is always full of water stains, and the water pipes that have been exposed for a long time are very easy to stick to dirt, and even moss will grow, and they need to be cleaned in time after every shower, which is very troublesome. And the outside of the pipe installation is easy to destroy, especially the plastic pipe is very easy to freeze and break in winter. The long-term moisture return of the angle steel bracket will inevitably rust and be unsightly.

Advantages: The bathroom water pipe is more visualized, if the water pipe has product quality problems in the future, it can be found in time, which is more conducive to maintenance and replacement, and at the same time, the maintenance does not need to be realistic, not so laborious.

The dark line of the bathroom water pipe refers to the internal structure of the water pipe hidden on the wall during the renovation of water and electricity. Defects: Even if the quality of the water pipe in the toilet is more, the service life is still relatively limited, and there is no guarantee that the water pipe can be used for a long time.

Advantages: bathroom water pipes go dark line, water pipes are hidden in the internal structure of the wall, the use of artificial marble materials to decorate the bathroom wall, the interior decoration style can be designed according to their own preferences, will not be very single, and do not have to worry about the water pipe stained with dirt, nor worry about the water pipe being damaged by external forces or external factors. The dark path of the water pipe will make the toilet look more comprehensive, ensuring the beauty and comfort of the toilet.

In general, despite the pros and cons of each, Uncle Squid still recommends that the water pipe or dark line is good when decorating the bathroom, which is more fashionable and trendy, beautiful and generous, and it is not easy to have problems, but it is best to leave the engineering drawings of the design plan pipeline for easy maintenance and maintenance. If the water pipe is on the bright line, it may lack a lot in appearance.

In the construction of household waterway pipelines, the direction and laying of pipes are particular, and the content of this part is directly related to the durability of the waterway and the convenience of use in the future, etc., which need to be paid more attention to by the owners. Next, I will introduce the four correct household waterway renovation pipe direction and laying content.

First, it is best not to change the original sewer position.

When renovating the waterway, it is best not to change the original sewer position, because when you change the sewer position, it will affect the drainage of the lower layer, and in severe cases, it will cause blockage problems.

Second, the entire water pipe is buried.

There are both horizontal grooves and vertical grooves in the buried part of the pipe, even after the construction is completed, the owner has a water reform roadmap, it is inevitable that the water pipe will be damaged in the process of later decoration. Because after the groove has been sealed, the tube cannot be seen. In addition, the whole water pipe buried in the wall should have no joints, and the water pipes with joints are prone to leakage.

3. Reservation and protection of sanitary ware outlets.

When the water pipe goes to the appropriate height, the water outlet such as shower, basin, washing machine should be reserved. The advantage of this is that when the renovation is completed and the tiles are laid, you can judge the direction of the water pipe according to the location of the water outlet. All water pipes are vertically upwards at the outlet, thus preventing the pipes from being damaged for any reason.

Fourth, the water pipe goes to the top.

When laying water pipes, it will be very troublesome to destroy the original underground pipes because there are many buried pipes under the ground, and the plowing itself is very unsafe. Moreover, if you go to the ground, in the later decoration process, if the electric drill damages the water pipe, it will affect the safety. Therefore, when the water pipe goes along the top of the wall and leads to the bathroom, when it encounters a place where water needs to be discharged, it can open a vertical groove to go down.

In the process of household waterway renovation, it is necessary to avoid the original water reform route to avoid problems such as water pipe leakage during the construction process, which will affect the daily life of the family.

Hydropower transformation, whether to go open pipe or dark pipe, what matters need to be paid attention to in the decoration process.

Construction specifications for toilet appliances and pipeline installation projects.

1. General provisions.

This chapter applies to the installation of sanitary appliances such as washing and cleaning in kitchens and bathrooms, as well as the construction of pipes in the water supply pipe section and indoor drainage pipe section after the water inlet valve of the household.

Water-saving appliances should be actively used for sanitary appliances and various valves.

All kinds of sanitary equipment and pipeline installation should meet the design requirements and the relevant provisions of the current national standards and specifications.

2. Quality requirements of main materials.

The variety, specification and color of sanitary appliances should meet the design requirements and should have a product qualification certificate.

Water supply and drainage pipes and pieces should meet the design requirements and should have a product qualification certificate.

3. Key points of construction.

The connection between various sanitary equipment and the ground or wall should be installed firmly with metal fixings. Metal fixings should be treated with anti-corrosion. When the wall is a porous brick wall, the holes should be drilled and filled with cement mortar before the fixtures are installed.

When the wall is a lightweight partition wall, a post-embedded part should be set in the wall, and the post-embedded part should be firmly connected with the wall.

The pipe connections installed by various sanitary appliances should be easy to disassemble and maintain. The drainage pipe connection should be made of rubber gasket drainage plug. Lead or rubber gaskets should be placed on the connecting surface of sanitary appliances and metal fixtures. All kinds of sanitary ceramic appliances shall not be embedded with cement mortar.

All kinds of sanitary appliances and countertops, walls, floors and other contact parts should be sealed with silicone glue or waterproof sealing strips.

After the installation and acceptance of various sanitary appliances, appropriate protection measures for finished products should be taken.

The pipeline laying should be horizontal and vertical, and the position of the pipe clamp and the slope of the pipeline should meet the requirements of the specification. All kinds of valves should be installed in the correct and flat position, which is easy to use and maintain.

The pipes embedded in the wall and the ground should be treated with anti-corrosion treatment and protected with cement mortar, and their thickness should meet the following requirements: the cold water pipe in the wall shall not be less than 10mm, the hot water pipe shall not be less than 15mm, and the pipe embedded in the ground shall not be less than 10mm. Pipes embedded in walls, floors or concealed applications should be accepted for concealed works.

The installation of hot and cold water pipes should be hot on the left and cold on the right, and the parallel spacing should not be less than 200mm. When the hot and cold water supply system is supplied with a water separator, it should be connected by semi-flexible pipes.

The installation of various new pipes should be carried out in accordance with the product instructions provided by the manufacturer.