Is the white spot on the apple moldy?

There are many cases of small white dots appearing on apples, usually red Fuji apples.

The small white dots on the fruit surface are the vents of the apples, which generally do not matter, and there is also a possibility that the white dots are caused by the invasion of bacteria in the apples. Let's talk about the reasons for these two different situations.

Enumerate: 1: The stomata of the apple: These stomata are like human respiration.

In the same way, plants also need a constant supply of fresh air, and this "fresh air" is different from the gas that humans need, and the gas they need is carbon dioxide.

Flowers, trees, and fruits absorb carbon dioxide for photosynthesis.

and release oxygen. But plants are different from people, they don't have nostrils, so they can't breathe like us humans, so they breathe through the stomata on the surface. Each small spot on the surface of the fruit, the outer bark of the tuber, or the bark of the tree is an opening for breathing.

These apple peel pores allow carbon dioxide to enter the plant and oxygen to come out of the plant. These plants are able to "breathe" through these insignificant ventilation tubes. These apple pores do not cause a disadvantage to it, nor are they so-called mold spots, and you can eat them with confidence.

2: The spots on the apple are the time when the apple grows, especially after fruiting to maturity, and the bacterial invasion should be like the general spores, which will make the apple get the disease of the ring pattern, which is reflected in the peel is a little bit of the spot, it is generally recommended to peel when eating, and the apple flesh can generally be eaten as usual.

This condition is caused by postharvest physiological disorders. It may be that the carbon dioxide concentration of apples during the modified atmosphere or during the transportation process and packaging bags is too high, which makes the respiratory metabolism of the fruit disorder and the brown heart phenomenon appears. It is also possible to suffer from cold injury, the so-called cold injury refers to more than 0 uncomfortable low temperature injury, and there will also be internal browning and black heart conditions.

Of course, the factors that are affected by cold damage are not only related to temperature, but also related to the ripeness and variety of apples. Generally low ripeness fruits, sensitive to chilling injury. The higher the maturity, the more soluble solids it contains, the stronger the corresponding resistance.

In addition, this injury may be more severe at higher temperatures, as the high temperatures accelerate the respiration metabolism of the fruit. For example, apples that are stored on the balcony are easy to have brown hearts when they are placed in a warm living room and happen not to be eaten for several days. If the apple is harvested too late or stored for too long, there will also be internal collapse, that is, the fruit has reached the physiological stage of late aging.

Similar to when we enter the old age, the lack of water will naturally wilt and dry up.

This kind of white spot appears when the apple is stored, indicating that it has been contaminated to a certain extent, and the quality or mold has occurred, so we must pay attention at this time and do not continue to eat, so as to better meet the requirements of scientific and hygienic diet.

The appearance of white spots on apples is not moldy, but the appearance of black spots on apples is mold, and white spots do not affect consumption.

This is no problem, it's normal, apples are basically there, this is produced by the rain and dew and the change of air when growing.

Apples that are spotted should not be eaten. Apple spots are divided into two situations, the first is a physiological disorder, and the second is a mildew disease. If the situation is not serious, as long as the lesion is removed two centimeters away, it can still be eaten, if the mildew reaches more than one-third of the whole fruit, it is not suitable for eating.

White spots on apples are imprints left by hail before the apples are ripe and will not affect their consumption.

The "white spots" on the fruit are infested by cotton aphids! It is not unreasonable for many fruit friends to guess the harm of flower face disease and Kang's mealybug.

In fact, the "white spots" on apples are infested by cotton aphids!

It is not unreasonable for many fruit friends to guess the harm of flower face disease and Kang's mealybug, because the symptoms of cotton aphid, Kang's mealybug and flower face disease are easy to make people "stupid and unclear", and it is easy to make mistakes if you don't distinguish carefully.

How to distinguish between apple cotton aphid, Kang's mealybug and flower face disease?

1. Aphids. The fruit infested by the cotton aphid is easy to develop poorly, and the damaged part is difficult to color, thus reducing the economic value of the fruit.

2. Mealybug Kang's.

The fruits harmed by A. kang's mealybug are easy to form deformities, difficult to color, and the fruit surface is dirty and full of white flocculents, which seriously affects the quality of apples.

3. Flower face disease.

Apples suffer from flower face disease, and many nearly round yellow-green patches will appear on the color consequence surface, and the fruit will become uneven, and when ripe, it will appear red and green ugly "flower face".

Why are there sheep aphid and Conn mealybug hazards now?

1. The prevention and treatment of drugs in the early stage is not in place.

The use of drugs in the dry branch stage, before flowering and bagging is not timely, the quality of the spraying is not good, the drug combination is unreasonable, and the eggs or the last instar adults who are overwintered are not killed in time, resulting in the young fruit of the cotton aphid or the mealybug before bagging, or the harm in the bag, resulting in this situation in the apple.

2. The old warped skin of the fruit tree has not been scraped off.

The diseased bark and warped bark on the fruit tree were not scraped in time, resulting in the late instar adults hiding in the cracks of the trunk, branches, cutting saws and rhizomes for overwintering, and began to reproduce at the end of dormancy, and began to commit crimes in the later stage!

In the final analysis, the main thing is that the prevention is not in place, the spraying is not carried out in strict accordance with the standards, the medication is not reasonably matched, the prevention is not enough, and the occurrence of pests and diseases is too late.

I would like to take this opportunity to remind the majority of fruit farmers that in the future in the management of apples, we must pay attention to "prevention", and if we prevent it, we will avoid the link of treatment, and we can also greatly reduce the loss of being harmed.

The hail before the apple is not ripe, and there are white spots after ripening, which is normal, and it does not affect the taste of the apple.

After eating it, the astringency in the mouth is the cause of the apple variety itself, and it will not be good, and it has nothing to do with the white and black spots on the apple. The black dots may be a little rotten, don't eat that place, as for the white dots, it may be that the sun shines at a different time.

It's okay, eat it, there are too many pesticides.

White dots on apples. It's the same as the spots on a human face. Does not hinder the taste of apples.

I think it's normal to have white spots on apples, there are no problems with the quality.

You probably bought a refurbished machine, Apple 3GS is known as the fastest machine, You said 3-5 seconds The address book can't be opened, it is estimated that either you buy a copycat, or you will renovate, you find the shopkeeper to change the machine, it will be exchanged for you, **There is no white spot, it is in his debt.

You just call 12535. Bring your invoice, receipt, or something.

White dots, vertical lines, and other colors are all manifestations of the flower screen, and the reasons and solutions for the flower screen are as follows:

1.If the cable is broken, the cable connecting the screen and the motherboard is burned or loosened, so it's good to change the cable.

2.The screen is broken, and the LCD screen is broken, this kind of no way, the most troublesome, to replace the entire screen assembly, the cost is very high.

3.If the motherboard is broken, it is also to replace the entire motherboard, but this probability is relatively small, but it is not ruled out, the way is to replace the motherboard, and the motherboard is generally cheaper than the screen.

Users can get Apple after-sales service to repair, do not find a non-Apple repairer.

It may be a dead pixel on the display, as long as it does not affect the use, there is no problem!

You see if it is a problem on the mobile phone film or inside the mobile phone, if it is a problem with the mobile phone screen, go to repair it as soon as possible.

The appearance of white spots on the screen of Apple mobile phones is a quality problem, commonly known as screen highlights.

1. Screen highlights generally refer to the irreparable single color dots that appear on the LCD display. The crystal surface of an LCD is a monolithically cut lens, and if there is a slight vibration or dust falling into the crystal structure during processing, this bright spot will be created and cannot be repaired. The bright spots are mostly light blue and red, sometimes white, and a few green.

It has to do with the ingredients of the highlights.

2. If it is within the warranty period, it is possible to go to the store for after-sales maintenance or replacement of a new machine, which is a non-human quality problem.

Mine is also a bird, take it......

The small white dot is an assistive touch function of iPhone, which can provide users with some convenient operations. You can turn it off if you don't need it.

Take iPhone 7 as an example, how to turn off AssistiveTouch is as follows:

1. Click Settings on the main interface of the phone.

2. Click General in the settings.

3. Click Accessibility.

4. Tap Assistive Touch.

5. Turn off the switch of the assistive touch control, and the small white dot on the phone will disappear.

Hello, it's not normal. Here are some things you can try:

Restart your phone. Restore your phone after backup.

If there is a white dot after shutting down, it means that the screen is dusty, and you need to go outside to repair the phone, and the following describes the method of flashing:

1.Open AISI Assistant, and you can see the [One-click Flash] button before connecting to the phone2The device is connected to AIS-Assistant, AIS-Assistant will automatically match the firmware that can be flashed according to your device, as shown in the following figure, we select "Version Firmware", and after "Automatically activate the device after the connection is successful" and "Retain user information to flash the phone", click "Flash Now".

3.Click "Flash Now" After the following interface will appear, you don't need to move anything, rest assured that you can wait for him to finish brushing

4.In about five minutes, the flashing is completed.

Answering the small white dot is the assistive touch function of the iPhone, which can provide users with some convenient operations. You can turn it off if you don't need it. Take iPhone 7 as an example, how to turn off AssistiveTouch is as follows:

1. Click Settings on the main interface of the phone.

2. Click General in the settings.

3. Click Accessibility.

4. Tap Assistive Touch.

If it doesn't affect the use, don't use it, there is a white spot if there is a problem with the backlight of the display, you can change the backlight, generally not less than 100 if you change it, so it doesn't affect the use You can leave it alone.

If it's the little removable white dot that comes with Apple's system, it's normal

If you don't want this little white dot, you can go to Settings --General --assistive touch, turn it off.

If the screen has a white spot, it must be damaged in the screen, I don't know if it has fallen or entered the water, if it doesn't affect the use, it's fine, if you want to take a break, you need to replace the entire screen, it is estimated to be quite expensive, ranging from 500 to 1000.

Did you apply the film? If you have a film problem, it may be that there is a problem with your film, enter the air, just change the film, if you are a problem with the film, that is, your mobile phone screen is broken, and there is no problem with changing the screen.

It should be that your phone's display is broken. Go to a mobile phone repair shop and solve it.

Most of the screens are broken, and it doesn't affect the use, so you can continue to use it.

The backlight board is bad, don't listen to their bunch of people who haven't used Apple.

Possible causes and solutions for white spots on LCD screens:

1. Most of the white spots are formed after dust or pressure in the backlight group.

Solution: You can remove the glass light guide plate and energize the lamp, and check the backlight group layer by layer to find the part where the white spots are located. The repair method is to directly replace the light guide plate, and you can also use a 3M vacuum cleaning cloth with cleaning solution to carefully wipe the light guide plate, and remove the stains on the surface to make the white spots disappear.

2. The lamp is aging, one end of the lamp is broken, the lamp socket is welded, and the lamp connection is loose.

Solution: Replace the lamp.

3. Bright line failure.

Solution: Generally, the cable connecting the LCD screen is opened, or the driver IC of a certain row and column is damaged. The dark wire is generally a leakage on the screen, or an open circuit for the TAB flexible board connection.

Leakage problems are generally not treated. If it is a bright line or dark line fault caused by the opening of the flexible board, you can use the LCD screen crimping soldering iron to deal with it. Multiple bright lines and bright bands that can be changed may also be faulty with the driver board.

It may be that there is a problem with your mobile phone screen, it is recommended to go to the after-sales service to take a look.

Hello, generally speaking, the bacis is dehydrated and sun-dried during the manufacturing process.

And the white spots on the eight immortal fruits you are talking about are the manifestations of moisture, but it may also be that the surface is affected by the moisture in the air and causes mold, and the inside is not necessarily moldy, you can cut the surface to see if the inside is also moldy, if not, you can cut the part with white spots on the surface, find a sealed container to save the one that is not damp, and if it is also moldy inside, do not eat it.