What are the disadvantages of ancient gold? What is the difference between ancient gold and ordinary

Disadvantages of the ancient method:

1. The ancient method is expensive, and the selling point is handmade, so it will be much more expensive per gram than the ordinary**;

2. The ancient method is not versatile, the design of this type is usually retro, and not all clothes can be matched;

3. The ancient method can not adjust the size, because the ancient method is made through the ancient process, so there is no adjustment of the size and so on.

4. The production process of the ancient method is relatively rough. The difference between ancient and ordinary is simply craftsmanship. As the name suggests, it mimics the ancient process of making metal objects, but in reality, production is inseparable from machines.

It simply captures the mindset of people who focus on traditional craftsmanship and innovatively caters to the "old goldsmith" saying.

5. No inlay: Although the hardness has been improved, the ancient ** bracelet still cannot be inlaid, because the probability of falling diamonds is still very large, so it cannot be inlaid.

The size cannot be adjusted, and the size of each ancient method is fixed when it is made, and it cannot be adjusted at will; It is not easy to match clothes, the ancient method is made with reference to the ancient **jewelry, and most of the styles produced are also retro style, and many clothes can not be perfectly matched; It cannot be set, and the ancient method ** cannot be set with diamonds.

Different processes: The ancient gold is different from other ordinary gold in the molding process, and the ancient gold casting process is the national intangible cultural heritage. The ordinary ** production process is a more commonly used ** jewelry making process, which has the characteristics of soft, easy to deform and easy to wear.

Different characteristics: Compared with the ordinary production process, the ancient gold has the characteristics of high hardness, strong wear resistance and less materials. Extended Resources:

Avoid contact: Chemicals and stains Chemicals in life, including hand creams, perfumes, dish soaps, etc., can actually oxidize the bracelet. Some components in the air and sweat will also slowly oxidize the bracelet, and there are also some stains and sweat stains, which will cause the bracelet to lose its luster in the long run.

Three major features of the ancient method:

1. The overall texture is matte, the texture is uniform and flat, and the color is antique.

2. The surface adopts the engraving process, the texture is clear and natural, and the layers are rich.

3. Special tools, handmade.

In addition, the representative frosting process in the ancient method can cause a matte effect of "warm color, flashy but not dazzling, expensive but not obvious".

Buyer's Guide. 1. First of all, we must choose a reputable brand enterprise, never choose unbranded vendors for cheapness, and be more transparent, significantly lower than the market to beware;

2. Secondly, when buying first-class products, remember to ask for invoices, which is the core of protecting the rights and interests of consumers;

3. If in doubt, you can test in time, the ** jewelry testing institutions under the national technical supervision department are distributed in major cities, and it is easier to detect the composition of ** jewelry;

4. Choose to invest in gold bars, gold bars and other first-class products, and choose regular merchants who promise to repurchase, and the quality can be guaranteed.

The ancient method ** is not real gold.

The ancient method is a kind of special process made out, its purity is not very high, the biggest feature is that the process is retro, fine workmanship, and pure gold, the purity of the ancient process is much worse. At present, it is impossible to have 100% pure gold on the market, and it is stipulated that the gold content of more than 99% is pure gold material, and the ancient method ** is the pure gold material recognized by the standard.

The gold content is not less than 1,000 parts of a thousand is called pure gold, which is the highest value in the naming of jewelry fineness in market circulation. In theory, 100% gold can be called 24k gold, but in reality, it is impossible to have 100% **, so China stipulates that the content can be called 24k gold when the content reaches the above (including **). The price of 10,000 pure gold is more expensive than that of 1,000 pure gold, and the value is also higher, but 10,000 pure gold is not pure gold.

Related introductions

The production process of the ancient method originated from the ancient palace office, an institution dedicated to the production of gold for the royal family. The main selling point of the ancient method is actually its process, from the process, the representative frosting process in the ancient method can cause a matte effect of "warm color, flashy but not dazzling, expensive but not obvious". Its amount of gold is relatively sufficient, and under the same volume, the amount of gold will be about 2 3 more than ordinary pure gold, thus giving people a thick and rustic feeling.

Because its texture is matte and frosted, it is indeed less likely to leave fingerprints than the glossy one. But the scratches are not easy to say, after all, they are all pure gold, pure gold is relatively soft, and it is generally harder than the nails, so you still have to pay attention to care when wearing it.

The ancient method refers to the hand-carved jewelry with the help of China's ancient traditional processing techniques. It is characterized by the fact that it is not valued by the cost of raw materials, time, etc., but by ancient craftsmanship and exquisite ingenuity. Among them, the representative "old shop" inherits the "classic of ancient handmade gold craftsmanship in China" and adheres to the "craftsman spirit".

The disadvantage of the ancient ** is that the craftsmanship **, **is relatively high, and the weight of the gram is greater.

Due to technological reasons, the same size and style of ancient gold, the first material used is much heavier than the ordinary process, and the ** of an ancient ** jewelry is more than a few thousand yuan, which is much more expensive than the ordinary**, however, the processing technology of the ancient ** is relatively fine.

The processing process of ancient ** is complex, such as hammering, gold supplementation, gold wire, carving, inlay, gold replenishment, polishing, etc., these are ancient ** production processes, all of which are purely handmade, and only after fine carving can be ***, which shows the value of ancient **.

Ancient gold is the ancient jewelry manufacturing process, is a series of production methods inherited by ancient craftsmen with handmade jewelry, such as filigree inlay, gilding, filigree, hammering, chisel flowers, gold and silver mistakes, fried beads, tired silk, etc. In ancient times, limited by the development of science and technology, each piece of ** jewelry was carefully carved by craftsmen. Later, the ancient gold refers to the ** jewelry that is not hand-made by craftsmen, but inherits the craftsmanship of traditional ancient gold and is made by machine.

The biggest feature of the ancient method of gold is the use of frosted technology, the surface of the jewelry is frosted, the overall matte texture, coupled with high hardness, compared with the traditional production process, it is not easy to leave fingerprints and scratches. The ancient process has improved the hardness of the jewelry to a certain extent, so compared with the traditional process, less raw materials can be used to achieve the desired effect in the production of jewelry. To put it simply, if you use the same raw materials to make a pair of bracelets, you can make them using traditional techniques and using ancient techniques

The ancient method is made with the help of ancient traditional craftsmanship.

The craftsmanship of the ancient method includes filigree, engraving, tire, hammering, inlay, gold repair, etc., which belong to the intangible cultural heritage, which needs to be made by skilled craftsmen with a lot of time and energy, and the production time is dozens of times that of ordinary gold jewelry. With the help of the ancient traditional processing techniques, the jewelry is hand-carved and finely polished, which refers to the ancient method.

The ancient method pays attention to returning to the basics, giving people a feeling of flashy but not dazzling, expensive but not obvious. There are three main characteristics of the ancient method, namely matte, heavy and retro, which is completely different from the ordinary gold jewelry with golden brilliance.

Ancient gold is not pure gold

At present, it is impossible to have 100% pure gold on the market, and the gold content of more than 99% is pure gold material, and the ancient method is the pure gold material recognized by the standard. The gold content is not less than 1,000 parts of gold, which is the highest value of jewelry fineness in the market circulation.

With gold content as raw material, the jewelry processed by the "solderless welding process" has no electroplating and no solder, the overall quality is consistent, and the product fineness has all reached the highest jewelry. In theory, 100% gold can be called 24k gold, but in reality it is impossible to have 100% **.

Therefore, China stipulates that the content above (including ** can be called 24k gold. The price of 10,000 pure gold is more expensive than that of 1,000 pure gold, and the ** value is also higher, but 10,000 pure gold does not belong to pure gold, and it can be said that there is no 100% pure gold on the market.