-
This belongs to the sheet metal project of car beauty, like our side has a separate project of learning, a professional team of teachers and facilities and equipment, you can get started quickly, you can consult and understand. With the gradual increase of motor vehicles, especially private cars, an auto beauty maintenance industry known as the "best industry" has made more and more people pay attention to it. At present, the booming auto market will surely drive the rapid development of the auto beauty service industry, and the auto beauty industry has become an industry with considerable investment value.
-
On Shenma Avenue, next to the Xiaoying Transfer Station, there is a paint-free dent repair.
-
Comprehensive comparison, I think it is better to learn car repair, now there are more cars, often bumpy on the road, so this great industry prospects, especially now limousine service, 4s shop almost all minor repairs hundreds of blockages. There are very lucrative car cosmetic and retouching industries that are all profiteering. In addition to the cost of the car repair shop, it is not open for business.
-
Different regions, different models, different damage status and area, the charges are different, and the specific size of the depression can be determined, and it is recommended to paint sheet metal, about 300 to 500.
The so-called car dent repair technology, also known as micro sheet metal, is sometimes called traceless and non-destructive technology, etc., anyway, there is no need to destroy the original car paint for body concave repair, the principle is actually very simple, that is, based on optics and mechanics, the use of the lever principle to slowly restore the pits of different depths to the original appearance.
As long as the pit on the surface of the door does not fall off and does not fall off the paint, it can be repaired without sheet metal or painting through the professional tools and equipment used in the repair technology of the dismantling of the door, and the color, finish or hardness, strength, toughness and durability of the body steel plate after repair all meet the requirements of technical parameters.
Precautions: After the vehicle has a scratch accident, you should immediately choose a more suitable place to park. After parking, tighten the hand brake, cut off the power supply, and turn off the engine of the car.
In specific cases, the regulations of specific circumstances should be observed, such as wide lights and tail lights should be displayed at night. On highways, hazard warning signs should also be set up behind the car according to regulations.
Check the condition of your vehicle. It is appropriate to use digital tools to record the situation on the spot. For example, the bend hand uses the camera function of the mobile phone and the digital camera he carries with him to record the scratch parts and the condition of the car.
Usually, it is necessary to shoot the front side of the car, the rear side of the car, and the bump parts from multiple angles. It is best to have a shot in the footage that reflects that both parties are at the scene.
-
Hello, I'm glad to answer for you Car dent repair 200 yuan. If the plastic position of the front and rear bumpers of the vehicle is dented, and now the primer is not exposed, this can be repaired by heating itself. After heating with a heat gun or hot water, it can be repaired normally by extrapolating it outward from the opposite direction.
If the primer is exposed, this needs to be repaired by spot touch-up or overall spraying. Generally, the cost of partial repair paint in the outside maintenance shop is 150 to 200 left and right, and the cost of the overall spraying of old slag is about 500 to 600. In a 4S store, the overall spraying treatment fee is generally selected, which is generally about 800 to 900 for oak.
If there are dents in the metal location of the vehicle, this can be repaired by no marks or spray paint.
-
Summary. Hello dear. Generally speaking, minor depression repairs** are within 1,000 yuan, and more serious depression repairs** may exceed 2,000 yuan.
Here are some common car dent repair methods and their **:1Suction cup method:
Use a suction cup to pull the depression back into place, ** at about 200 yuan. 2.Baking paint method:
The depression is hot, and then the depression is pushed back to its original position with a special tool, ** at about 1000 yuan. 3.Cold bench method:
Use a special cold bench to cool the depression, and then use a special tool to push the depression back into place, ** at about 1500 yuan. 4.Replacement Parts Method:
If the dent cannot be repaired and a part needs to be replaced, it will be determined by the part. The above ** is for reference only, the actual ** will vary depending on the restoration shop, region and model.
Hello dear. Generally speaking, minor depression repairs** are within 1,000 yuan, and more serious depression repairs** may exceed 2,000 yuan. Here are some common car dent repair methods and their **::
1.Suction cup method: use a suction cup to pull the depression back into place, ** at about 200 yuan.
2.Baking paint method: the depression is hot, and then the depression is pushed back to its original position with a special tool, ** at about 1000 yuan.
3.Cold bench method: use a special stool and a cold bench with special traces to cool the depression, and then use a special tool to push the depression back to its original position, ** at about 1500 yuan.
4.Replacement part method: If the depression cannot be repaired and the part needs to be replaced, it will depend on the part.
Car dent repair requires professional skills and tools, so it is recommended to choose a regular car repair shop for repair. In addition, the insurance company can also provide a dent hope that mine can help you with the sedan car! Repair services, which can be claimed according to the terms of the insurance.
When driving, the sail chain should be careful to avoid collisions and scratches to reduce the occurrence of dented macro skins.
Car dent repair requires professional skills and tools, so it is recommended to choose a regular car repair shop for source repair. In addition, the insurance company can also provide dent repair services, which can be claimed according to the terms of the insurance. When driving at the source of flat rolling cracking, care should be taken to avoid collisions and scratches to reduce the occurrence of depressions.
Any questions, dear?
There is a concave network on the Internet that specializes in the collection of car depression repair technicians across the country, which should be able to help you, but because of the different restoration masters, the repair effect is not the same. >>>More
It depends on whether you plan to study at a training institution or a physical store. It is estimated that the training institution will be about five or six thousand. If you go to a physical store to study, there is no tuition fee, which is the so-called apprenticeship. >>>More
If the body is depressed and painted, it is recommended to paint sheet metal, about 300 to 500, but if there is no paint off and you are very concerned about the original paint, you can try the paint-free car dent repair technology, no need to destroy the original car paint for body concave repair, the principle is actually very simple, it is based on optics and mechanics, and the use of the lever principle to slowly restore the pits of different depths to the original appearance, look at the following picture You can see it at a glance. >>>More
Car dent repair**. There was a dent in the car, and now there are two ways to fix it. One is to keep the vitality unchanged, and the other is to repair the reinforcement after it has been flattened. >>>More
The dent repair is based on the principles of optics, physics and mechanics, and the use of the lever principle will be affected by various external reasons in the vehicle, and the different sizes and depths of the depression appear on the car body, provided that the body paint surface is not damaged, and the metal surface is not excessively stretched, which is a modern process. Automobile dent repair technology is an international advanced technology for the repair of various parts of the car appearance, due to the impact of external forces to form various depressions for repair, the technology also greatly shortens the repair time (a depression repair takes about 20---40 minutes), and greatly reduces the cost (only about 50% of the traditional sheet metal and painting). And the concave part repaired by this technology will never deform and fade, completely make the vehicle show its original style again, whether it is the door cover, front wing, rear compartment cover, etc"Pits", the repair range is more than 90%.