How to use idle routers?

Hello everyone, I'm Daming, since there are idle routers should be fully utilized, there is such a situation, usually "routers" are placed in the living room, which leads to the problem of "weak wifi reception signal in the bedroom", you can put the idle router in the bedroom to improve the weak wifi reception signal, then I will explain in detail the specific operation steps, <>

First of all, actually test the actual distance between the "living room" and the "bedroom", for example, a distance of 20 meters, then make a 20-meter network cable, and then before connecting the idle router, you need to set the address of the LAN port, that is to say, the two routers can not set the same IP address, mainly to avoid IP address conflicts, the detailed operation steps are, turn on the power supply of the idle router, log in to the back operation interface of the idle router with a mobile phone, and set the LAN port address to withFor example, if the IP address of the original router is different, set the IP address of the idle router to <>

After setting the IP address of the LAN port, find the "Wireless Network Options", set the SSID name of the wireless network to a different SSID name from the "original router", the purpose of this operation is also to avoid the conflict of "wireless network", and finally set the "Internet mode" of the WAN port to "dynamic IP", <>

After setting the "LAN port address" and "SSID name", you can connect to the router, and the detailed operation steps are to connect one end of the network cable to the LAN port of the "original router", and the other end to the WAN port of the "idle router".

Summary

As long as the "idle router" is placed in a place where the receiving wifi signal is weak, this problem can be improved, which can be said to kill two birds with one stone!

The above is the content shared today, if it is helpful to everyone, give it a like**, if you want to know more about the works of "computer maintenance and application", you can open the "app"."Search for "Computer Technician Daming", there are a large number of short** and Q&A works, so let's talk about it here, see you next time!

You can use the idle router as a relay, add a network port, log in to the settings interface of the old router with a computer, click on the IP settings in the system settings, modify the IP address of the router, and finally connect the main road of the old router to increase the extensibility of use and make the network more stable.

You can ** it off. Let yourself get some blood back, and you can also let those who need it get what they need, killing two birds with one stone.

In the case of a wireless router, the idle wireless router is connected to the main router to extend the wireless wifi signal. Coverage.

Nowadays, routers are also being updated very quickly, resulting in many people having several idle routers that have been replaced at home. In fact, many people don't know that idle old routers still have great use value. For example, you can think of these idle routes as wififRelays, expand the coverage area of wifi at home, etc.

It's all about being easy to use.

Use idle routes as network switches.

With home Wi-Fi.

With the popularization of technology, it is possible that there are multiple devices in a home that need to use the router's Ethernet.

Port. However, the number of ports on a router is also limited, and if there are too many devices, the ports will not be enough. At this time, we can use the idle router as a switch for the network.

Use a network switch to add more ports. It's basically a network version of the main power strip, with an additional port plugged into one of the ports on the router. As a result, the connection immediately increases the number of available ports.

You should disable the wireless network on your old router to avoid conflicts.

Use the idle router as a small server.

If you need to store data, then you can take out the idle router at home and make it into a server. Everyone knows that the cost of building or renting a server is not cheap. But if you use an old router, then you can save a lot of money.

However, it is important to note that this technique can only be used on routers that support firmware flashing. Once you're done, you may be able to put all your data or information on the server, or even share it with other members of your family.

You can use the router as a trunk.

For friends with a large house area, it is indeed difficult for a router to cover every room. As a result, there are some WiFi signals that are very poor, which greatly affects the use. In this case, you can make the most of the idle router.

An idle router can be used as a wireless wifi relay station. The advantage is that the primary router and the idle router are at the same level of relationship, so the failure of the primary router does not cause the entire network to be unusable. Moreover, it can expand the coverage area of WIFI and achieve full WIFI signal in each room.

Method 1: Wireless WDS Bridge, Method 2: Wired Bridge, which can be used as a wireless switch, and can be used to connect to any router's WiFi. Pay attention to set the wifi user name and password of the front router.

You can use a network cable to pull it into another router, and then connect to the wifi again, so that our wifi coverage area will be larger, and the information will be more smooth.

According to my character, it is estimated that it is directly hanging idle fish**, after all, it is idle and cannot be used.

It can be used to expand the network port and expand the wireless coverage. It can be used as an extension device in several devices that require a network cable, or it can be placed in places where the signal is not good enough to expand the WiFi coverage.

Idle routers can be set up to share paid WiFi. Then if someone connects to your wifi, you have to pay for it, otherwise you won't be able to use the internet.

1. Extended signal. Restore the old route to factory settings, then connect the wifi of the old route with your mobile phone or computer, click the wireless relay in the wireless settings, select the mode according to the needs of your stool, and then select the wifi signal of the new route, and enter the password.

2. Add network ports. Log in to the settings interface of the old route with a computer, click on the LAN IP settings in the brigade system settings, modify the management IP address of the router, close the DHCP server, and finally connect the main route of the old router. At this point, the old route can be used to connect to computers and other devices.

3. Wireless relay. We can also use the idle router as a relay, so as to effectively extend the network distance and make the network at home more stable.