Use router remote control, how to remotely control tplink router

can be controlled. Routers and switches are just a medium, though.

It's through this platform that your computer communicates with him and the computer. Then your computer controls his computer.

In your example, the tenda model: TEI402, is just a platform. are all connected on this platform. Your computer can control his computer. But it's not the router that can control him.

I don't know if I understand this.

Methods of remote control:

1. Windows remote sharing.

2. VNC control.

3. Dameware control.

If you want to manage routers anywhere on the network for real-time and secure management and control configuration. The remote web management function can realize the remote management of the router in the place where the Internet is accessed, so do you know how to remotely control the TPLink router? The following is some relevant information about TPLink router remote control that I have compiled for your reference.

How to remotely control the TPLlink router:

1. Set up remote web management.

Log in to the router interface, in Security Functions > Remote Web Management, the web management port is modified to 9090, the remote web management status is selected as Enabled, and the remote web management IP address is set to allow all computers on the Internet to access the router interface), and click OK. As shown in the figure below:

Please note the following:

It is recommended to set the web management port to an infrequently used port, such as a port above 9000.

2] After changing the web management port, you need to use http: LAN port IP: port (e.g., 9090) when managing the LAN computer.

The wireless router in the new interface, click Advanced Settings > Device Management > Web Management Settings to set it up. As shown in the figure below.

After turning on remote web management, the LAN computer still uses the router that accesses the new interface.

For enterprise-level routers, click System Tools > Device Management Management > Remote Management, add a new entry, and set the web service port in System Management Settings.

2. Check the IP address of the WAN port.

Click Running Status to view the WAN port status and record the WAN port IP address.

3. Access the router from the external network computer.

If a dynamic domain name is logged in to the router, you can also use http: domain name:port to access it.

5.TPLink routers remotely manage secondary routes.

2.How to remotely control TPLink router WDR7500.

3.How to Resolve Unable to Access Router Remotely.

4.How to set up remote management of TP router WR885N.

Introduction: How to manage the router through the Internet? Most routers provide a "remote web management" function, which can be used to remotely manage routers through the Internet. Let's take a look at how to use this feature.

Method steps

First of all, log in to the router management interface, usually we can find the "router management address" and "user name" and "login password" on the nameplate on the back of the router. Here we take the "Tengda" router as an example.

Open the browser and enter the default password "admin" to log in to the router management interface.

Then click the "Advanced Settings" button to set up the screen in detail.

Switch to the "System Tools" tab, click on the "Remote Web Management" item, and then check the "Enable" item.

Then enter the "Port" number (which can be set to any number between 1 65535) and "IP address" (the IP address of the computer in the WAN that can perform remote web management) and click the "OK" button.

Then switch to the "Advanced Settings" tab, click on the "Running Status" item, check the "WAN IP" address corresponding to the router, and remember it.

Finally, you can realize the remote management operation of the router. You only need to enter http: wan ip:port in the browser interface of the remote computer (the IP address must be the same as the remote IP address in the router) to access the router remotely.

1. Log in to the official ** of the router, and you can query the ** information on the box where the router is installed.

2. Select Network Control on the official website to enter the Network Control page.

3. The network control page shows all the devices that are now using the signal sent by the router.

4. Select the device you want to turn off, and then select to turn off the network.

If you want to limit the speed of a device, you can choose to limit its speed by selecting Only Internet Access or other options.

The signal sent by the router can be used by users who know the account number and password. If you want to make restrictions, you can only turn it off by logging in to the router's official website. You can log in on your mobile phone or log in to the official website from your computer to close it.

If you want to open it, you can open it with one click