-
Anonymous users2024-02-12Recently, there are many friends asking the mobile phone remote control computer to turn on the method, we often encounter the situation of going back to the company to send information when we rest at home, sometimes the company is far away, what if you don't want to go back? Knowing how to do it below can save you a lot of time.
Mobile phones are now the most common electronic devices, and they are widely used, and almost everyone has one. With the advent of the mobile Internet era, everyone often uses mobile phones to connect to computers. The following will introduce to you the method of remote boot of the mobile phone control computer.
Computers are very powerful, but they are still a little less portable than mobile phones. Occasionally, we miss information when we are on a business trip. To solve this problem, we also need to use a mobile phone to remotely control the computer, and we can also remotely turn it on.
Mobile phone control computer remote boot tutorial.
1. First of all, you need to enter the computer BIOS to set it. Press the power button and then keep hitting the BIOS boot hotkey, different computer buttons are different, generally F2, ESC, Del key, you can try it. Go to the BIOS, use the arrow keys to select Advanced Settings > Advanced Power Management > Find Wake Up by PCI-E PCI device, some computers have the Wake On LAN option, set it to on.
Press the F10 key to save and exit.
3. Go to the option settings and click on the configuration of the wake on lan option.
4. Select a public address and enter a public IP address or a dynamic domain name. You can log in to the Peanut Shell management center to get a free shell domain name, fill in the shell domain name, and the port is the default.
The mobile phone controls the computer to turn on remotely.
The mobile phone controls the computer and remotely boots the computer**4
5. The next step is to set up the router and bind the IP and MAC
The mobile phone controls the computer to turn on remotely.
The mobile phone controls the computer and remotely boots the computer**5
6. Added port mapping, fill in the default port of the public address.
The mobile phone controls the computer to turn on remotely.
The mobile phone controls the computer and remotely boots the computer**6
7. The router logs in to the peanut shell dynamic domain name.
Cell phone. Mobile phone computer**7
8. Then open the Network and Sharing Center and click on the linked network.
The mobile phone controls the computer to turn on remotely.
The mobile phone controls the computer and remotely boots the computer**8
9. Click Properties.
The mobile phone controls the computer to turn on remotely.
The mobile phone controls the computer and remotely boots the computer**9
10. Click the Configure button.
The mobile phone controls the computer to turn on remotely.
The mobile phone controls the computer and remotely boots the computer**10
11. Select the Power Management option and check Allow this device to wake up the computer.
The mobile phone controls the computer to turn on remotely.
The mobile phone controls the computer to turn on the computer remotely**11
12. Open teamvi on your phone
-
Anonymous users2024-02-11Tools Material: Laptop.
1. Find the Jiyan Calculator on the computer desktop, right-click the mouse, and select Properties to enter.
2. After entering the system properties fold, the user will be allowed to remotely connect to this computer and tick in front of it.
3. Switch to the remote interface, which will also allow remote assistance to connect to the Split Xiang Clan computer in front of the hook, and then select Advanced to enter.
4. After entering, this computer will be allowed to be checked in front of the remote fraud control.
5. Then go back to the desktop and click on the remote desktop connection in the attachment inside to start.
6. Then enter the IP address of the computer in the regular page, click Connect, and you can remotely boot the computer.
-
Anonymous users2024-02-10Method steps.
Turn on the motherboard's LAN to wake:
Today's motherboards generally support LAN wake-up, taking ASUS motherboards as an example, press the DEL button to enter the BIOS settings when booting up, enter the [Advanced Power Management] in [Advanced Settings], and turn on the [Wake up by PCI-E PCI device] function. The settings of other motherboards are similar, and some motherboards may have options like "Wake On LAN".
Set up TeamViewer:
Log in to TeamViewer and turn on all three options for unattended access.
Go to Options and open the wake-on-lan configuration in the General tab.
In the [Wake-On-LAN] configuration window, select the public address, fill in your public IP or dynamic domain name in the address field, and recommend the peanut shell dynamic domain name, which is free of charge. How to view: Log in to Peanut Shell, enter the [Management Center], and find the [Shell Domain Name] under [Domain Name].
Fill in the [shell domain name], and the port will be default.
Set up your router:
Bind the IP address to the MAC address. If you are assigned an IP address by DHCP, you need to bind it to the MAC address to ensure that the IP address assigned is the same each time.
Do port mapping. Both the external and internal ports are populated with 9.
Log in to the Peanut Shell dynamic domain name on the router. The account password is the password of your registered peanut shell account, and the connection can be displayed successfully.
Set the computer network card to wake up (this is not required for Mac):
Open the NIC properties of the computer's network tethering connection, click [Power Management] in [Configuration], and check "Allow this device to wake up the computer".
Remote wake-up and control:
After the above three simple steps, the remote computer is configured. If you want to wake up remotely, just install TeamViewer on another computer or mobile terminal, and click [Wake Up] on the corresponding computer.
Desktop. Click [Wake up] to wake up the remote computer, and double-click the computer in the connection list to turn on [Remote Control].
How do I turn on the remote boot and remote control of my computer?
Mobile. Tap the power icon to wake up, and tap the icon with two arrows to start [Remote Control].
-
Anonymous users2024-02-09Sunflower remote boot stick, search for it yourself. Very cheap. There is a supporting sunflower remote control software (control the computer after booting).
-
Anonymous users2024-02-081. You need to turn on the LAN wake-up of the motherboard first. Take a motherboard as an example, press the DEL button to enter the BIOS settings when you boot up, enter the [Advanced Power Management] in [Advanced Settings], and turn on the [Wake up by PCI-E PCI device] function. Different motherboard settings may be different, please set them yourself according to the manual.
2. In the computer system, you need to open the control panel, device manager, open the properties of the network card, click the "Advanced" item, and set it to "on" in the shutdown network wake-up.
3. Then you can map the connected Internet network to this computer through router mapping or DMZ method.
4. As long as the external device accesses this IP address, the computer will automatically turn on.
Extended Materials. Wake OnLAN (WOL), commonly known as remote wake-up, is a feature supported by many network cards. The implementation of remote wake-up is mainly to send a special format of data packets to the target host, which is a software made by AMD to generate special data packets required for wake-on-network, commonly known as magic packets. Although the MagicPacket format is only a technology developed and promoted by AMD and is not a recognized standard in the world, it is still supported by many network card manufacturers, so many network cards with Wake-on-LAN function can be compatible with it.
The computer has been stopped at boot and left in the motherboard logo interface, which means that problems were found in the self-test process of power-on, and they need to be checked one by one, and only after solving the problem can DAO enter the system normally. >>>More
When the boot can not enter the system, many friends think that it is a hardware failure, and some friends know a little bit about it, and replace and disassemble various parts of the computer indiscriminately, these are a misunderstanding, some friends get the computer repair shop, because they don't know the reason for being overcharged, these are the reasons why there is no laptop. Step to read. >>>More
There are three reasons for the fault you said, the software feels fine, first, the fan is dirty and the heat dissipation is not good, which causes the CPU to overheat and lose power, second, there is a problem with the power supply and charging circuit of the motherboard, and third, the power failure phenomenon caused by virtual soldering of the north-south bridge graphics card chip on the motherboard, it is best to find a maintenance point to help you detect it.
There are many reasons for a black screen, such as memory, hard disk, graphics card, motherboard, monitor, power supply, etc. First you have to start with the software, and then the hardware. Clause. >>>More
The common causes of screen failures such as screen flickering and screen shaking are: first, the quality of the screen itself, screen aging or inferior products, second, the screen line contact will not be damaged or damaged, and third, the motherboard screen power supply is abnormal or the screen failure caused by the virtual soldering of the graphics card BGA packaging chip, it is recommended that you send it for repair and testing. >>>More