What happens when the inkjet printer doesn t get into the cartridge? How to deal with it?

The nozzle is continuously cleaned, and the air cannot be extracted.

This is because the specific gravity of the air is very small, and when the nozzle is cleaned, the ink under the cartridge is extracted, and the ink from the outer cartridge continuously enters the inner cartridge under the negative pressure of the inner cartridge. How much ink is drawn and how much ink comes in. The air is light, in the upper part of the inner cartridge; The ink is heavy, and the air on the cartridge cannot be pumped out at the ink outlet.

Many maintenance personnel understand this, and in this case, they will never clean the sprinkler head continuously (except for the maintenance personnel who don't have a brain), because this will not only not help, but will run the risk of burning the sprinkler head. Thus, the use of syringes to extract cartridge air was invented. This is because the continuous offering looks simple, but in fact its structure is very tight.

For example, how does the continuous supply know how much ink is needed when the printer prints? When there is an oversupply, ink will flow into the inside of the printer, which will not only waste ink, contaminate the printer, but also may damage the printer. **Insufficient ink, horizontal streaks will appear, or even no ink will appear.

How much ink does the printer need, how much ink is supplied. No more, no less. How does it work?

Continuous supply is achieved by maintaining the pressure balance. Unplugging the inner ink cartridge and using the syringe to extract air will inevitably destroy the sealing performance of the continuous supply, and the original normal balance of the continuous supply will be destroyed, so a series of problems will follow, so people sigh that the use of continuous supply is easy to block the nozzle!

The correct solution is to use the safe exhaust method, or non-destructive exhaust. Most of them do not require the removal of the inner cartridge or the use of tools such as syringes, so they do not affect any part of the printer and do not compromise the sealing performance of the continuous supply. You just need to take a picture of the inner cartridge and send it, and look at how your inner cartridge pipeline is connected.

When taking photos, please do not unplug the ink cartridge.

If so, check whether the hole of the cartridge will be drilled too much, or the glue hole will be damaged, and the glue hole will be replaced if it is damaged, if the hole is drilled too much, seal the hole with wax or glue gun.

Let's see if it will go backwards.

The air in the supply line will not affect the printing. You can ignore it for a while.

It is important that there is not too much air in the inner cartridge. Otherwise, the air mixes with the ink to form a foam (vaporization), and once it enters the nozzle, it will form a broken line, or a horizontal stripe. If the condition is severe, a color cast can also occur.

Before and after cleaning the nozzle, print the nozzle check pattern. If the disconnection position changes, it means that there is too much air in the inner cartridge. It is recommended to use a safe exhaust method to drain excess air from the inner cartridge.

It is not recommended to use a syringe to extract air. Otherwise, the syringe will destroy the sealing performance of the cartridge and cause the cartridge to leak;

Do not use the method of cleaning the nozzle to extract air. The air is light, and the cleaning nozzle draws ink, not air. Therefore, the cleaning nozzle cannot effectively extract air.

Here's why:

1. The powder cartridge is not the original ink cartridge, replace the original ink cartridge for testing.

2. The ink cartridge is installed incorrectly, take out the ink cartridge and reinstall it.

3. If the cartridge sensor is damaged, the cartridge cannot be detected, contact the after-sales service to replace the sensor.

4. If the main control board is faulty, resulting in a display error, contact the after-sales inspection main control board.

Solution: 1. After the printer adds ink, the ink cartridge needs to be reset to zero, otherwise the printer does not know whether you have added ink, you can find the stop button on the machine panel, press and hold for 5 seconds to reset, and you can continue printing.

2. The printer motherboard chip program, record the moment of the ink cartridge, when the counter reaches the maximum value after printing, think that the ink cartridge is empty, please replace the ink cartridge in time, even for the ink cartridge filled with ink, its ink counter value has not changed, so the printer will be treated as an empty ink cartridge, usually need to wait a few minutes.

The printer cartridge has ink but shows no ink for the following reasons:

1. The compact is not the original compact. Replace the original cartridge for testing.

2. If the cartridge is installed incorrectly, take out the cartridge and reinstall it.

3. The cartridge sensor is damaged and the cartridge cannot be detected. Contact the aftermarket for a replacement sensor.

Solution: 1. After adding ink to the printer, you need to reset the ink cartridge. Otherwise, the printer does not know if ink has been added. The stop button can be found on the panel back to the machine, and then press the reset key for 5 seconds to continue printing.

2. The chip program of the printer motherboard records the moment of the ink cartridge. When the counter reaches its maximum value after printing, the cartridge is considered empty. Please replace the ink cartridge in time, even if the ink cartridge is full of ink, the value of the ink counter does not change.

As a result, the printer will be treated as an empty cartridge and will usually have to wait a few minutes.

Is it a Canon machine? If it is a Canon all-in-one machine, press and hold the stop reset button for 5 seconds and then release it, if it is a single-print machine, then press and hold the button below the power button for 5 seconds and then release it, because Canon's machine relies on counting to display the amount of ink, so it cannot display the amount of ink correctly, especially after changing the continuous supply!

It should be that the cartridge is running out of ink, or maybe the roller is broken.

Damn, I don't know where to copy an article like this when I see a 100 point, isn't it just a jam? Be careful if the paper does not enter the printer or the pallet does not rise up, it may be the roller clutch positioning.

After the printer is reconnected, the ink does not go to the cartridge for the following reasons:

1. The printer is leaking from the supply pipe, and other supply tests are replaced.

2. The position of the printer is too low, and the continuous supply and the printer are placed in the same horizontal position.

The continuous ink supply system is referred to as continuous supply, and it is in inkjet printers in recent years.

The field has only emerged as a new way of supplying ink. Continuous ink supply system, which uses an external ink bottle and then connects with the ink cartridge of the printer with a conduit, so that the ink bottle continuously supplies ink to the ink cartridge, as the so-called"Continuous supply"。

There are several possibilities:

1. The position of the outer ink cartridge is not on the same level as the printer, and it will not work if it is low. to be on the same level plane.

2. There is an air inlet hole in the outer ink cartridge, which is plugged or blocked, and without air pressure, the ink will not pass.

3. If there is air ingress, there will be blank sections in the ink conduit, which will affect the printing quality, or it may not be printed. The method is to extract air from the inner cartridge with a medical syringe barrel.

4. The printer itself is faulty. . . This has to be solved by a professional store, and individuals can't get it.

You can look them up for yourself.

There are 3 possibilities for ink not to enter the cartridge:

1. The ink pipeline may be pressed too tightly, or by the notch, you can take a closer look, if it is pressed too tightly, you must change another installation method.

2. Normal printing is basically not visible from ink to run-in, and the ink to the ink cartridge can only be seen with a cleaning nozzle.

3. There are two mouths on several bottles filled with ink, both of which are blocked with soft rubber stoppers, and the small one must be pulled out, and the installation manufacturer is equipped with a filter plug (like a gyroscope-shaped) to ensure the pressure balance on both sides of the ink cartridge and the ink bottle, so as to supply ink.

Check whether the cartridge is incorrectly installed, then click "Start" to open the printer and fax machine inside, then right-click the "printer icon", click "Properties", there is a maintenance column inside, click on, and then there are cartridge settings inside. You can also do a deep cleaning of the printer by the way. If the cartridge is liquid, look for clumps or blocked outlets.

If it doesn't work, take it and fix it.

Use the safe exhaust method, or non-destructive exhaust. There is no need to unplug the inner cartridge or use tools such as syringes, so it does not affect any part of the printer or compromise the sealing performance of the continuous supply. Send you a diagram of the working principle of continuous supply, 3 pictures of the operation** and the explanatory text.

It is easy to operate by comparing ** and captions.

Turn on the printer driver, generally maintenance - cleaning the print head should be OK.

What model of printer? If it is Tianwei or Gree's connection, I can guide you to operate. Other miscellaneous brands are exempt.

Didn't you pull the plug from the air intake,!!

There are several possibilities for the situation you are talking about, please check:

1. There is a rubber stopper on the external box on the continuous supply system that has not been opened? The inside is in a vacuum, so it does not enter the cartridge.

2. The position of the external box for continuous supply is lower than that of the printer, resulting in ink reflow.

The solution is to check the first two checks, if the rubber stopper is not opened, open the rubber stopper, and place the external box at the level of the printer. Then clean the print head on the computer, the ink will be sucked into the ink cartridge, because there is air in the tube, there will be no pattern when you start cleaning, clean it several times until the tube is filled with ink.

Not sealed well.

Fuzhou Dicheng office equipment **** professional powdering, sales of toner cartridges.

First, it is certain that your continuous supply may not be well controlled in the process of air pressure equilibrium, see if the airtightness of your inserted cartridge is good, if not, you should replace it;

Second, the ink leakage, may be because your continuous supply device is not in the same horizontal state, you can take out the continuous supply of ink cartridges, put the continuous supply in the same level state, put it for a period of time, if there is ink overflow in the ink cartridge, take a napkin to wipe it clean;

Third, for the black ink you said does not come out, you can go to the Internet to spend 5 yuan to buy an ink-absorbing fixture, with a syringe to pump ink outward to solve, at the same time, this tool can also make your continuous supply of air pressure balance restored, this tool for your continuous supply is necessary.

Fourth, warm reminder, these are done, when reloading the machine, be sure to wipe the chip behind the cartridge dry, or it may burn the cartridge chip, and at the same time, you must pay attention to the ink not to leak a lot into the machine, be careful to burn the motherboard.

This is a problem with the continuous ink supply system, and the red chip needs to be replaced.

The ink in the printer is not going away for the following reasons:

1. There is no seal for continuous supply, and there is air leakage;

2. The nozzle is blocked, resulting in the inability to produce ink;

3. The position of the continuous supply is too low, and it should be placed in the same horizontal position as the printer;

4. Replace the continuous supply with a new one for its own quality problems.

The continuous ink supply system is referred to as continuous supply, which is a new ink supply method that has only appeared in the field of inkjet printers in recent years. Continuous ink supply system, which uses an external ink bottle and then connects with the ink cartridge of the printer with a conduit, so that the ink bottle continuously supplies ink to the ink cartridge, as the so-called"Continuous supply"。

Yes, it should be a problem of continuous ink supply, and if it is only sold, you can find a merchant.

It may be that the plug of the ink cartridge is plugged, you clean it a few more times, test it after you finish, if it still doesn't work, you go to the place where you bought the printer to check it,