The problem of inkjet printer inkjet head has been bothering me, which hero is troublesome to explai

The printing hair you said is mushy, this is not a broken printhead, it is caused by the oblique spraying of the printhead. If there is a special cleaning solution, it will be improved under cleaning.

But if you're printing too much, it's due to the natural life of the printhead.

The replacement nozzle of the Epson R series is a bit troublesome, and it must be dismantled step by step.

As for what you said about replacing it with color, that's impossible.

If the amount of black is large, you can buy a small A4 laser, and it is also good to print black text and**.

The second point: to maintain the nozzle, is to often play the cleaning strip, because if you do not print for a long time, the ink will precipitate and block the nozzle.

The third point: it's not good to do it yourself, and the sprinklers are very exquisite. Non-professionals should not disassemble and assemble.

The fourth point: when you can make a picture, you can choose C100M100Y100 black, so you can play black without K100.

1. Why is the inkjet head bad? (In most cases, it is corroded by ink, resulting in oblique spraying or scattered spraying) 2. Is there a way to maintain the inkjet head? (No, when it is mild, you can calibrate the nozzle and clean the grating strip, please change the ink, the black and white parts should be equipped with other printers to complete, the compatible ink of the R series is not good for black and pure).

4. Can I replace the black nozzle with a colored nozzle? (No, the 6-color printhead is a flat plate integration, you should ask the repairer to return the old printhead).

1。It should be oblique spraying, and it is better to buy an inkjet printer for the printhead at this price.

2。Use a good ink, usually turn on the printer often, repair it yourself, and use a clear liquid. It is not possible to replace the black printhead with a colored printhead.

There is a service life, the nozzle will be blocked by ink after a long printing time, usually not printed every once in a while, to prevent blocking, mine is Canon can change the ink cartridge, but the ink cartridge is too expensive not to change, add alcohol to clean it and feel that the effect is not too big.

If it needs to be replaced, the cost is about 600-700 yuan, plus an additional 100 yuan repair fee.

was hacked, and it was cheaper to buy a 2-hand plus even a supply than for him to change a nozzle.

The solution to the blockage of the inkjet printer printhead is as follows:Device: Honor MagicBook

System: Windows 10

Device: Canon All-in-One Printer TS3180

1. Click [Start] on the computer, as shown in the following figure:

2. Click [Equipment and Printers], as shown in the following figure:

3. Click the selected [Printer] to be cleaned, as shown in the following figure:

4. Right-click and click [Printing Preferences], as shown in the following figure

5. After opening the Printing Preferences dialog box, click Maintenance. Click Maintain and Customize Format, as shown in the following image:

6. Click [Deep Cleaning], as shown in the following figure:

7. Select [All Colors] and click [Execute] to clean the printer printhead, as shown in the following figure

To clean the printhead, first we turn on the printer. Click Start - Printers & Devices.

Right-click on the printer you want to clean and select Printer Preferences.

In the printer options we select Maintenance - Printer Cleaning.

Click Start in the pop-up page. Then the printer starts the cleaning operation.

The printer cleans the operation page, usually 3-5 minutes. At this point, the printer will ring, just wait.

After the cleaning is completed, the print pattern test page will be prompted, and we can click to start printing.

Click Print. Make sure there is paper in the printer.

Then check to see if the printed pattern test paper is the same as the page below. If the first case indicates that the cleaning is complete, click End. If this is the second case, click Clean and repeat the above steps.

Use the cleaning tool in the inkjet printer program to clean the printhead, which can be washed several times until troubleshooting.

When cleaning, be careful not to touch the nozzle and carefully wipe the edge of the nozzle with a high-quality wet paper towel or cotton-free paper towel. Then use the wash button on the printer control panel to clean the printhead until the printout effect is clear.

When manually cleaning the cartridge holder, clean the channel between the cartridge conduit and the nozzle for this particular one; In addition, it is necessary to dissolve the ink and ink blocks in the channel; Dry ink in the nozzle and nozzle should be carefully cleaned.

Inkjet printer tips

When we use the printer, the print head will be blocked, at this time we can immerse it in warm water for about 10-20 minutes, dissolve the dye in warm water, and then wipe it clean with a dry paper towel, and the ink cartridge can not be used immediately, it should be directly put into the printer for reuse.

The printing round machine itself will come with some self-test programs, which will lead to the consumption of a large amount of ink, so when we use it, it is best to print the printing materials together, so that continuous work will not lead to a lot of ink waste.

The above content refers to Encyclopedia - Inkjet Orange Oak Printer.

1. To clean the nozzle, first of all, we hit the printer. Click Start - Printers & Devices.

2. Right-click on the printer we need to clean and select Printer Preferences.

3. In the printer option, we choose maintenance - printer ballast vertical cleaning.

4. Click Start in the pop-up page. Then the printer starts the cleaning operation.

5. The printer cleans the operation page, generally 3-5 minutes. At this time, the printer will shout, just wait.

6. After the cleaning is completed, we will be prompted to print the pattern test page, and we can click to start printing.

7. Click Print. Make sure there is paper in the printer.

8. Then we check whether the printed pattern test paper is the same as the page below us. If it's the first case, it's complete, and we can click on Finish. If it is the second case, we click Wash and repeat the above steps.

If the nozzle is not blocked, there may be no ink pressure, one is that the ink pump is faulty, and the other is that the ink filter has not been replaced for too long? Check one by one.

Hello, there are several possible reasons:

1.It is not used for a long time, because the cleaning is not in place, the ink circulation system is blocked (add solvent to the circuit, open the circulation system to clean) 2The nozzle is clogged, just clean it.

3.The pump was damaged, causing insufficient pressure.

4.The filter cannot be used properly, cleaned or replaced.

5.There is a problem with the ink quality.

If none of the above is the case, then it is recommended that you contact the seller of the inkjet printer.

Hope it helps.

What brand, if you understand, I can help you solve it.

Inkjet printer cartridges and printheads are not the same concept.

Ink cartridge: A device used to store printer ink.

Printhead: A printer part used to jet ink onto paper.

Economical inkjet printers, printheads and ink cartridges are made into one and cannot be separated. If the printhead or cartridge is damaged, it needs to be replaced. This kind of printhead is simple to make, low cost, and low printing accuracy.

It is suitable for students or families who do not have a large print volume and do not have high requirements for print quality.

**Inkjet printers, most of which are separated from the printhead and cartridge. The printhead inkjet is fine, has a long life, and is also more valuable. When a certain color ink is used up, the ink cartridge can be replaced directly without having to replace the printhead, which relatively reduces the cost of use.

The concept is not exactly the same, some cartridges have their own printheads, and some cartridges simply hold ink. The difference is: the ink cartridge without the printhead is relatively cheaper, and its printhead is directly installed on the printer, which can be used for a long time, as long as the printhead is not blocked, it can be used forever; Ink cartridges with jet are equivalent to disposable products, and when the cartridge runs out of ink or the cartridge is broken, it is thrown away along with the nozzle.

The nozzle is available in hot bubble type and piezoelectric diaphragm type. These two are divided according to the inkjet method. There are also head-ink integration and head-ink separation, HP Canon is head-ink integration, and epson's is head-ink separation.

How to tell the difference? The head-ink cartridge is integrated with a printhead underneath. So the HP Canon cartridge is expensive.

Epson's is just an ink cartridge for ink, and the machine has a printhead on it. There's a hole under one of the cartridges where the head is separated, facing the nozzle.