Classification of printer toner, how to know how much printer toner there is

The model of the original toner corresponds to the model of the machine, and there is nothing that is not classified. If you want to know how many models of toner there are, then you need to find out the model number of some machines to match.

1. According to the electrical properties of toner, it can be divided into: positive powder and negative powder.

2. According to the magnetic properties of toner, it can be divided into: magnetic powder and non-magnetic powder.

3. According to the manufacturing process of toner, it is divided into: physical powder and chemical powder.

The manufacturing method of physical powder mostly adopts the crushing method and the toner particles made by the physical method, which have uneven shape, large particle size, poor fluidity, and its surface properties are also difficult to control, and the fixing temperature is high.

The manufacturing method of chemical powder mostly adopts polymerization method and chemical method to manufacture toner particles with spherical particle shape, uniform charge, small particle size, high fluidity, high transfer efficiency and high print image quality, and the only disadvantage is that the manufacturing cost is high.

4. According to the printing speed of the laser printer, it is divided into: low-speed powder and high-speed powder.

Generally, a laser printer with a print volume of no more than 10 pages per minute is defined as a low-speed machine.

Generally, a laser printer that prints more than 14 pages per minute is defined as a high-speed machine.

The biggest difference between the two is that the fixing time of the low-speed machine is much longer than that of the high-speed machine, and the fixing temperature of the fixing component is also higher than that of the high-speed machine. Therefore, generally when filling toner, low-speed powder cannot replace high-speed powder.

Tools Materials: Take HP printers as an example.

1. First, on the printer's settings panel, click on "Wrench."

icon" button.

2. Then the display box shows "Main Menu", on the settings panel of the printer, click the "Arrow Back" button.

3. After that, on the settings panel of the printer, select "Report" and click the "OK" button. <>4. Then on the settings panel of the printer, select "Consumables Status Page" and click the "OK" button.

5. Finally, the printer prints out the status of consumables and displays the remaining toner amount of toner in the toner cartridge.

The main toner models are: ML1710, LD A36A78A.

1. ML1710: Samsung : ML ) 1666 1676 3201 SCX F SF-560 565P 750 755P MSYS P.

2. LD2020: Xerox: Docuprint 203A, 204A; Lenovo:

lenovo lj
n、m
n
。

A36A78A: HP: HPLASERJETP N, M1120, M1120N, M1522N, M1522NFPop1102, P1102W, P1566, P1606DN.

Printer toner is not universal. Because the toner is charged, the printer is attracted by positive and negative charges, and some more precise operations are completed, the technical methods of each manufacturer are different, the requirements of the toner are not the same, and different models are not the same, otherwise there will be printing all black, low gray, light color, etc.

Magnetic toner is generally magnetic, you can judge with a screwdriver, the magnetic roller is metal, generally with magnetic toner printers to use a resin scraper (easy to wear the toner cartridge to shorten the toner cartridge use) to ** the waste powder on the toner cartridge.

Since the advent of electrostatic copying technology, with the rapid development of information technology and office automation, the extensive use of laser printers and electrostatic photocopiers requires photocopied products to have higher resolution and more appropriate development density. Toner needs to have good particle shape, fine particle size, narrow particle size distribution, and suitable triboelectric chargeability.

Wet development was eliminated due to the preservability of consumables, while dry development was widely used, and its development system was divided into one-component and two-component development.

Two-component development has high resolution and environmental resistance, and is widely used in engineering copying, color copying, and high-speed copying. One-component development has grown rapidly in recent years, and companies are using it to launch a range of products, such as digital copiers, laser printers, and MFPs.

First of all: in principle, the toner of various models is not universal, because its composition, the amount of charge and the level of the softening point are different, and its performance.

The requirements are mainly based on the need for printer matching, the particles of toner are fine and uniform, generally 7 12 microns in diameter. Due to the influence of objective factors such as heat, ultraviolet rays, humidity, etc., it must be stored properly.

There are many ways to classify laser printer toner, which are roughly as follows:

1.According to the electrical properties of toner, it can be divided into: positive electric powder and negative electric powder;

2.According to the magnetic properties of toner, it can be divided into: magnetic powder and non-magnetic powder;

3.According to the manufacturing process of toner, it is divided into: physical powder and chemical powder.

4.According to the printing speed of the laser printer, it is divided into: low-speed powder and high-speed powder.

To sum up, because of the working principle of the printer. and the intellectual property rights of the manufacturer.

Hope it helps!

Different brands of printers have different particle diameters and production processes of toner, and the transfer of toner cartridges is also different. Some can be used between several brands, but most are not.

Because the toner is charged, the printer is attracted by positive and negative charges, and some more precise operations are completed, the technical methods of each manufacturer are different, the requirements of the toner are not the same, and the different models are not the same, otherwise there will be all black, low gray, light color, etc.

Because different printers use different toner cartridges, the specific working principle and structure of toner cartridges are also different, so the toner used in toner cartridges is not universal.

Toner cartridges, also known as photosensitive drums, generally consist of a basic substrate made of aluminum and a photosensitive material coated on the substrate. The toner cartridge not only determines the quality of the print, but also determines the amount of money that the user needs to spend in the process of using it.

Selenium is a non-metallic chemical element with the chemical symbol SE. It can be used as a photosensitive material, a catalyst for the electrolytic manganese industry, an essential nutrient element for the animal body and a beneficial nutrient element for plants.