What should I do if the gas card is not ventilated when I just charge the natural gas It shows 37 sq

It may be that the personal switch is not turned on, but it is more likely that the battery in the personal gas meter is insufficient, or the battery is replaced. The gas card is plugged in but there is still no gas: 1. The card is not successfully inserted, and the IC card is caused by my own operation error.

failed and gas meter.

Effective contact, IC card damage, there is also a possibility of gas loss, that is to say, the business hall has successfully sold gas, and the card has been successfully inserted, the transaction is unsuccessful, and the business hall gas sales personnel have made mistakes: 2. Including contrast cards, card insertion is not in place, card withdrawal in advance, etc., but this phenomenon will have an error prompt sound and information or no prompt sound at all (IC card not detected) 3, you can go to the business hall to check the IC card. 4. If the above reasons have been ruled out, the gas is not sold successfully, the gas meter card holder is damaged, but the gas volume is gone, and the IC card information cannot be read normally, which means that the gas volume in the card is not charged to the meter.

Extended information: Functional features 1, built-in monolithic microprocessor, automatic completion of gas flow data collection, measurement, display, valve control and prompt alarm and other functions. 2. When the user's purchased gas is lower than the set value, the LCD displays the "gas purchase" prompt and is accompanied by an alarm sound, when the purchased gas is exhausted, the valve will be automatically closed, and the valve will be opened only if the gas is repurchased and the card is inserted, so as to realize the prepaid function of "buy first and use later".

3. The whole machine adopts micro-power consumption design, and the installation of the battery is unique. 4. It has a perfect anti-gas leakage scheme, and the gas alarm is connected to the external one.

Detect the indoor air condition at any time, once the indoor gas concentration exceeds the standard, immediately sound the alarm and automatically close the valve to cut off the gas source, which effectively prevents accidents caused by stove leakage and other reasons, even if it is noisy indoors. Even when the user is asleep or out of the house, it is guaranteed to be safe even if the alarm cannot be used. At the same time, it also eliminates the danger of self-opening of the gas meter control valve due to abnormal conditions, providing users with the greatest safety guarantee.

5. The table adopts international advanced flash memory, and the data can be stored for more than 1 year after power failure. 6. In terms of preventing gas theft: the IC card that conforms to the international standard IS07816 is adopted, which is a special encryption card for one card per household, with multiple software and hardware encryption, which is not easy to decipher, and prevents illegal modification and copying of the data in the card; When there is malicious external electromagnetic interference.

, the control valve will automatically close, stop the gas supply and record it. The above measures effectively prevent the occurrence of gas theft. 7. The product must be identified by the National Electrical Instrument Explosion-proof Quality Supervision and Inspection Center. Reference: Encyclopedia - IC card gas meter.

If the freshly charged natural gas card is not connected, first check whether the battery level of the natural gas meter is normal and whether the protection switch is completely closed.

In this case, it should be that your pipeline is faulty, and it is recommended to find someone from the gas company to repair it.

The easiest way is that you use your gas card on the gas meter, wipe it with the reverse side, and then plug it in on the front and let it power on normally.

What is the reason for the successful top-up of natural gas or the absence of gas? The card is plugged in to show how much square gas there is, but it can't catch fire and the water heater doesn't have hot water.

Hello, pro 1, did not reopen the solenoid valve for the prepaid gas meter, they have a solenoid valve that can automatically cut off the gas, this solenoid valve will automatically close after the gas meter is in arrears, cut off the gas **. When we recharge again, we can't automatically open the solenoid valve. The reason why this design is to prevent accidental leakage of gas, for example, the valve of the follow-up equipment is not closed, and we do not care about it after recharging, which may lead to gas leakage and cause accidents.

Therefore, many gas meters have to be manually restarted after recharging, and if they are not restarted, they are still not gasy. Solution: There are different methods according to different gas meters, which can be roughly divided into two categories, one is to press and hold the button on the gas meter after recharging, when you hear the sound of the valve opening, the LCD screen shows that the valve is opened, even if it is opened.

The other type is the gas meter without buttons, you need to re-insert the recharge card of the gas meter, insert it into the gas meter, and wait for a few seconds to hear the valve open, and you're good to go. 2. At present, many gas meters are still powered by dry batteries, and when the battery is insufficient, the solenoid valve of the gas meter cannot be opened automatically. Although sometimes, the gas meter shows normal, the solenoid valve still does not open.

The main thing here is that the battery is low enough to support the information display of the gas meter, but not to support the rotation of the solenoid valve motor and open the solenoid valve. Even if it can be used normally when there is gas before, the number of oaks does not mean that it can still support the reopening of the solenoid valve after closing. In this way, there will also be the problem that gas cannot be used after recharging in arrears.

Solution: In the above situation, replacing the battery of the gas meter can solve the problem. The gas meter generally uses 4 No. 5 batteries, let's not care whether it is displayed normally, take out the old battery, replace the new battery and then restart the gas meter to solve the problem.

It may be that your switch is not turned on, but it is more likely that the battery in your natural gas meter is insufficient, because the one that relies on electricity to control the switch valve, you change the battery to see, there are 4 No. 5 or No. 7 batteries in it, which is generally the reason.

What should I do if I can't get a gas when I just charge the natural gas? Display 37 squares just can't be opened.

You need to call the local natural gas company**, connect to the manual customer service, report your specific address, and the staff will help you turn on the natural gas, which can be used at this time. If it is not this problem, it may be due to the following reasons: 1. First of all, you can borrow someone else's gas card to test it, if it can supply gas normally, it is a problem with the user card.

2. If someone else's normal card is not gas, it means that there is a problem with the gas supply equipment, such as the failure of the electronic card control valve. 3. Other users who share the same pipeline with the user to repair a fault, close the relevant gas gate, the pipeline is out of gas, and there will be no gas at the natural gas outlet. 4. If none of the above is true, it means that the gas has been cut off in the pipeline, and the automatic protection function of the "connecting pipe" of the user's stove will automatically lock and close the gas path when there is no pressure in the pipe to ensure safety.

The above problems can be solved by the gas company, I hope to help you.

Summary. If there is no card insertion, it is an ordinary base meter, and you have to go to the business hall to pay or pay online.

What should I do if I can't get a gas when I just charge the natural gas? Display 37 squares just can't be opened.

If there is no card insertion, it is an ordinary base meter, and you have to go to the business hall to pay or pay online.

Nowadays, the gas meters of natural gas that everyone uses have gas cards. Users need to use a gas card to buy gas, and they can buy it according to their own needs, generally there is no lower limit, there is an upper limit. 2 5 How to restart after paying natural gas payment?

When you run out of gas, you have to go to the gas payment point to buy it. Before purchasing, you have to insert the gas card on the gas meter, so that you can buy, otherwise you can't display real-time data when you buy. 3 5 plug-in card gas meter according to the brand and region, the location of the card is also different from the world, when checking the card to find the location of the card to read the data.

Read the data and insert the card to have a slight stay, and when you hear the prompt tone, the card is generally read successfully. 4 5 plug in the card to read the data after purchasing back gas, no need to restart any components. Just insert the card to read the data at the place where the card is inserted.

After inserting the card, you will hear a prompt tone, and generally the card is successful, and you can use it. 5 5 After the gas meter is successfully read, on the display screen of the gas meter, the search ruler will be displayed to show the amount of gas after purchase. The purchased gas quantity chain book is also displayed on the printed receipt, which can be compared.

Natural gas cards are a convenient way for residents to pay for gas, but sometimes they cannot be recharged. There can be a variety of reasons why you can't top up, the most common of which is an insufficient balance on your card.

To solve this problem, we can first check whether the balance in the card is sufficient. If you don't have enough money, you can try topping up your card or buy a new one. If the amount is sufficient, you can also try to check whether the natural gas meter and pipeline are normal.

If none of the above tests are abnormal, then it may be that the gas company is faulty or there is a problem with the chip in the card. At this time, we need to contact the customer service of the gas company in time for consultation and solution.

In short, the reason why the natural gas card cannot be inflated may vary from person to person, and we need to check the potato residue one by one. Only by solving the problem in time can we ensure that our residents can use gas normally.

The problem of not being able to recharge the gas card can be caused by a variety of reasons. More often than not, this can be caused by a faulty gas meter, a problem with the gas pipeline, or an issue with the gas card itself.

If you are experiencing the problem that your gas card won't charge, you should first check if the gas meter is damaged or malfunctioning. The gas gauge is usually located on the exterior of the user's house and can be confirmed by observing whether the pointer on the dashboard is turning or whether a reading is displayed. If you find that the gas meter is damaged or the pointer does not turn, you may need to contact the natural gas company or professional maintenance personnel to deal with it.

In addition, natural gas pipeline problems may also cause natural gas card recharge failures. In some areas, especially during the cold winter months, pipes may be frozen or suffer other forms of damage. These issues can cause a reduction or disruption in the flow of natural gas, causing the top-up process to fail.

Finally, there can also be problems with the gas card itself. Sometimes, the card may be expired or damaged and needs to be replaced. If your natural gas card is premature or damaged, contact a natural gas company** for a replacement or repair.

In conclusion, the problem of gas card not filling can be caused by a variety of reasons. If you encounter this kind of problem, you can first check if the gas meter is damaged or malfunctioning. On top of this, the natural gas ** company can also be contacted for further inspections and repairs if needed to determine the root cause of the problem and resolve the issue.