Apple can t update the system, Apple can t update the system

Reason 1: There is not enough space left on your iPhone.

When updating the iOS system of the Apple mobile phone, if you encounter a situation where the system cannot be updated, you must first look at how much memory space is required for the latest iOS system version to be upgraded, which can be viewed in the mobile phone software update interface. If the remaining space of the mobile phone is insufficient, we will also encounter the problem of failure when updating the system of the mobile phone. At this time, we need to check how much space we have on our mobile phones and whether it is enough to update the system.

Solution: Enter the settings of the iPhone in turn General About the available capacity of the machine, after finding the available capacity option, the capacity displayed later is the remaining available capacity of our current mobile phone, if the remaining capacity space of the mobile phone is really not enough to install the system update, then we need to clean up the system junk in the mobile phone, unimportant**, documents, or** and other large-capacity files, so as to get more free space. Workaround:

Go to your iPhone's Wi-Fi settings, then find the currently connected Wi-Fi, disconnect it and reconnect the Wi-Fi, or connect to a Wi-Fi network with a better signal, and see if you can update the system. Problem 3: System version problem.

If you encounter the problem that you cannot update the iOS system of your iPhone when you upgrade it, it may also be because the current version of your iPhone is in beta or beta and has already installed a profile. Workaround:

In this case, you need to delete the profile, which can be deleted in the phone's settings General profile. After the profile is deleted, restart your phone and go back to the settings General software update to see if the system update is working properly.

Yes! But you have to have Apple's own account password.

Apple can't update the system, you can use iTunes to flash the computer and upgrade to the latest system. 1.Install iTunes.

Start plugging in your iPhone, press and hold Power (power button) and Home (circle button below) for 10 seconds, wait for your iPhone to go black (as a rule of thumb, probably after a few seconds after the black screen), release the Power button, and keep holding until iTunes recognizes yours at this time Windows will first find some new hardware and drive it by itself, after iTunes automatically recognizes the iPhone, a prompt box will pop up. "iTunes has detected an iPhone stuck in recovery mode, you have to restore this iPhone and then use it with iTunes. At this point, click OK.

4.Open iTunes, display the cross-section of your iPhone's capacity and information, and click Restore to start the recovery process. 5.

Until a cable connection screen is displayed on your iPhone, iTunes prompts that the firmware restoration is complete.

Summary. If you encounter a problem that you can't update when updating the system version, it is likely that it is due to a network problem. Choose to enter the settings interface of the phone, turn on the wireless LAN, then find the currently connected wifi, disconnect and reconnect the wifi, or connect to the wifi network with a better signal, and then see if the system can be updated.

If it's not a network problem, take a look at how much memory space is required for the latest iOS system version to be upgraded, and whether it's due to lack of space.

Apple can't update the system.

Dear, hello, I will help you answer this question, I am answering it for you, please wait a while, don't be too anxious, I hope my answer can help you, solve your troubles, I wish you a happy life and good health.

Hello, Apple can't update the system, first check whether the iPhone storage space is sufficient ** If the device storage space is insufficient, it may not be able to update the system, and it is easy to freeze during the update process, resulting in failure.

If you encounter a problem that you can't update when updating the system version, it is likely that it is due to a network problem. Choose to enter the settings interface of the phone, turn on the wireless LAN, then find the currently connected wifi, disconnect and reconnect the wifi, or connect to the wifi network with a better signal, and then see if the system can be updated. If it's not a network problem, take a look at how much memory space is required for the latest iOS system version to be upgraded, and whether it's due to lack of space.

Not enabled network: If you do not use the enabled network, you will not be able to check for updates, and the verification will naturally fail, so you can turn the network on. System Network Issues:

The failure to update the system verification may be a system network problem, and you can restore the network settings. System bug or unstable network: Just restart the phone, or update it under WiFi.

Not enabled network: If you do not use the enabled network, you will not be able to check for updates, and the verification will naturally fail, so you can turn the network on.

System network problems: Failure to verify the update system may be a system network problem, and you can restore the network settings.

System bug or unstable network: Just restart the phone, or update it under WiFi.

It may also be caused by the instability of the system or poor compatibility during the system upgrade. Generally, after the machine is used for a period of time, there are many system garbage and software compatibility problems, so before upgrading or flashing the machine, you must restore the factory settings before operating. This is stable, safe, and has a high success rate.

Summary. There are four main reasons why Apple can't update the system: 1. The phone has insufficient space left, 2. The battery is insufficient, 3. Network problems, 4. The system version is too old.

There are four main reasons why Apple can't update the system: 1. There is not enough space left on the phone, 2) The battery is insufficient, 3) Careful network problems, 4. The system version is too old. Sparrows.

Here's how to fix it:

2. Insufficient power: The mobile phone needs to ensure that it has more than 50% power when upgrading the system, and if the power is insufficient, it needs to be connected to the power supply.

3. Network problems: When the memory space capacity of the iPhone is sufficient, you need to check whether the network is unblocked, and you need to switch a good WiFi network to complete the system and level.

4. The system version is too old: the mobile phone system makes the loss of Qin Tomato use the previous version, which makes it impossible to directly update it with the first empty of the mobile phone, and you need to use the computer iTunes to upgrade the version.

If our device does not support the new software, we can only maintain the latest version of the current device in this case. Inzhaowu needs the hardware support of the new model for the new iOS system. In addition to the current device hall can automatically identify the matching iOS system, we can check the list of compatible devices on Apple's official website.

Taking iOS 16 as an example, the official website compatibility list is shown in the following figure:

If it takes too long, the system update will also fail. The long update time is related to the size of the iOS system and the speed of the Internet, it should be pointed out that if the iOS system version span is too large, the updated package will be too large. In order to improve the speed, I can use the wireless LAN and avoid other ways to solve the problem when updating iOS.

The specific operation steps for connecting the iPhone to the computer for system upgrade are as follows:

1. First connect your phone to your computer, and then open the iTunes software on your computer

2. After opening the software, it will be displayed to the main interface of the mobile phone, and the system version of the mobile phone will be displayed on the right side of the software, and then click Check for Updates below:

5. Finally, a dialog box appears and click OK, so that the computer will automatically upgrade the system for the Apple phone:

Summary. Dear, hello, I am happy to serve you: 1. When updating the iOS system of the Apple mobile phone, if the remaining space of the mobile phone is insufficient, the mobile phone will fail to update.

2. When the memory capacity of the iPhone is sufficient, it cannot be updated when updating the system version, which is caused by network problems, check whether the network connection is normal. 3. If there is no problem with the storage space and network, it may be that the current version of the iPhone is in beta or public beta, and the profile file has been installed.

The iPhone system cannot be updated.

Dear, hello, I am happy to serve you: 1. When updating the iOS system of the Apple mobile phone, if the remaining space of the mobile phone is insufficient, the mobile phone will fail to update. 2. When the memory capacity of the iPhone is sufficient, it cannot be updated when updating the system version, which is caused by network problems, check whether the network connection is normal.

3. If there is no problem with the storage space and network, it may be that the current version of the iPhone is in beta or public beta, and the profile file has been installed.

It's all no problem.

Dear, you can do a factory reset and then update. iPhone system upgrade failure reasons 1, Wi-Fi is sometimes in a false connection state, you can disconnect and then connect; 2. Go to Settings - General - Restore - Reset Network Settings, initialize the network, and then update; 3. Apple will usher in a **peak after releasing a new version, and we can choose to update iOS around 0:00 or even early in the morning; 4. Applications running in the background may interfere with the update process, so it is recommended to close them all before updating.

You can try cleaning up useless files on your device or uninstalling unwanted apps to free up space. Network issues: The update system requires a stable network connection, and if the network signal is not good or the network connection is unstable, the update may fail.

Tremor can try to connect to other networks or wait for the network to return to stability. Low battery: The update system requires a certain amount of power support, and if the device is low on power, the update may fail.

You can try charging your device to enough power before updating. Older devices: Older devices may not be supported by Apple's update system, or there may be performance issues with older devices after they are updated.

You can try to see if your device meets the update requirements or consider replacing your device. If none of the above methods solve the problem, you can try to contact Apple customer service or go to an Apple authorized repair service point for help.