The iPhone can t update the system, and it keeps showing an error!

How to deal with iPhone system upgrade failure: You can put your iOS device into recovery mode and restore the device with iTunes: 1. Access.

** And install the latest iTunes version; 2. If iTunes is turned on, please turn it off, connect your device to the computer, and then open iTunes; 3. In the case of connecting the device, please force restart the device by following the following steps:

1. On iPhone 6s and earlier, iPad or iPod touch: Press and hold the Sleep Wake button and the Home button at the same time, when you see the Apple logo, don't release the buttons, keep holding both buttons until you see the recovery mode screen.

2. On iPhone 7 or iPhone 7 Plus: Press and hold the Sleep Wake button and the Volume Down button at the same time, when you see the Apple logo, don't release the buttons, keep holding both buttons until you see the recovery mode screen. 4. When you see the option to "Restore" or "Update", choose "Update".

iTunes will try to reinstall iOS without erasing your data, wait for iTunes to have your device's software, if it takes more than 15 minutes and your device is out of recovery mode, wait for it to end and then repeat the third step.

This situation is very common for you, and the main reason is that when you update, there is a lot of packet loss, and Apple background cannot verify the integrity of the update package! If you really want to upgrade the system, it is recommended that you use the computer to connect the data cable to upgrade completely, the next Aisi assistant can be very simple, but before the upgrade to back up the data, this kind of flashing belongs to the new flash! And this upgrade is also the most stable!

To say a little more, it is not recommended to upgrade the system of your 7 mobile phone, and the biggest problem with the 13 system is that the battery is drained too fast! If you really want to upgrade, remember to back up your data!!

What should I do if the iPhone can't update the system?

Reason 1: There is not enough space left on your iPhone.

When updating the iOS system of the Apple mobile phone, if you encounter a situation where the system cannot be updated, you must first look at how much memory space is required for the latest iOS system version to be upgraded, which can be viewed in the mobile phone software update interface. If the remaining space of the mobile phone is insufficient, we will also encounter the problem of failure when updating the system of the mobile phone. At this time, we need to check how much space we have on our mobile phones and whether it is enough to update the system.

Solution: Enter the settings of the iphone in turn, about the available capacity of the machine, after finding the available capacity option, the capacity displayed later is the remaining available capacity of our current mobile phone, if the remaining capacity space of the mobile phone is really not enough to install the system update, then we need to clean up the system junk in the mobile phone, unimportant**, documents, or** and other large-capacity files, so as to get more free space.

Cause 2: Network reasons.

If you encounter a problem that you cannot update when updating the system version of your iPhone, it is likely that it is due to a network problem.

Solution: Go to the Wi-Fi settings of your iPhone, then find the currently connected Wi-Fi, disconnect and reconnect the Wi-Fi, or connect to a Wi-Fi network with a better signal, and see if you can update the system.

Cause 3: The system version is faulty.

If you encounter the problem that you cannot update the iOS system of your iPhone when you upgrade it, it may be because the current version of your iPhone is in beta or beta and you have already installed a profile.

Solution: In this case, you need to delete the profile, so as to enter the phone's settings general profile file to delete. After the profile is deleted, restart your phone and go back to setting up Universal Software Update to see if the system is updated properly.

Network issues, restore network settings, or change network DNS attempts.

If your phone memory is low, go to Phone Settings - General - iPhone Storage to clean up your phone memory and try it.

The system version of the phone is a beta version or public beta, and the profile has been installed, so go to the phone settings - general - profile file and delete it.

The failure of the iPhone system update may be due to the unstable network, or it may be due to the lack of memory on the phone, which makes it impossible to update the system.

Why does Apple update the system show an error? Let's take a lookApple's update system shows an errorReasons and solutions.

Apple's update system shows an error, which may be a network failure.

It may also be that the space on the phone is too small to install, and the lack of space will also cause the software or system update to be unable to install, you can release some memory and try again.

The above is the content of the error displayed in the update system of the Apple mobile phone, I hope it will be helpful to you.

What should I do if the Apple system update prompts an installation error?

Apple system update prompts an installation error, you can do it as follows:

1. Check whether there is software installed that blocks system updates, and delete it in the description file.

2. Check whether the memory is full, and keep more than 5G memory margin.

3. Try again after shutting down and restarting, or go to "Settings" to find the "General" option, and then find the "Restore" option, and try again after restoring the network settings.

4. The system cannot be upgraded through the traffic of the mobile data network, but can only be upgraded with wifi.

You can use a computer to connect to a mobile phone to re-flash the phone, Apple iTunes or third-party software such as Aisi Assistant is OK.

The reasons why the iPhone can't update the system are as follows:

1. It is possible that the system configuration is too low to update the latest system.

2. It is possible that you are not connected to Wi-Fi and cannot complete the update.

3. There may be insufficient memory to meet the requirements of installing the latest system.

4. It is possible that the power level does not reach more than 50% when updating.

OTA upgrade: Blind link to open the phone's settings - general - software update, choose to update the system (in the case of WiFi, and keep the power at about 60%).

iTunes upgrade: computer** a latest version of iTunes, (preferably the latest version, otherwise it may cause unknown errors when upgrading),**Open it after completion, connect the phone to the computer, iTunes will automatically play the prompt of whether you need to upgrade the system, click confirm or directly click the upgrade button to upgrade.

Enter DFU recovery mode for recovery.

DFU mode: Turn off your iPhone, press and hold the power on button and the home button at the same time, when you see the white Apple logo, please release the power on and off button, and continue to hold the home button to turn on iTunes.

After waiting for it to prompt you to go to recovery mode, you can press and hold the shift key on your keyboard, click "Restore", and select the corresponding firmware to recover.

If you want to upgrade, you need to click No in the prompt that pops up after **iTunes and connect to the computer, and then select the restore button next to the upgrade button to reinstall the system upgrade, please pay attention to the backup before upgrading, this operation will erase all the data of the phone.

Summary. Hello, it is an honor to answer this question for you for the following main reasons:

An abnormality occurs on the network.

There was an error in the system.

The main workarounds are as follows:

The reason why the iPhone won't check for updates may be a network problem, we can reconnect the wifi to give it a try. Click "Settings" on your desktop.

On the settings page, click "WiFi".

Select the wifi you are already connected to and click on the small exclamation mark on the right.

Click "Ignore this network".

Click "Ignore" on the pop-up window.

Then reconnect to the internet and click on "Software Update".

Apple system can't update the latest system, what is the reason for the software error?

The main solution is as follows: the reason why iPhone won't check for update may be a network problem, we can reconnect the wifi to have a try. Click "Settings" on your desktop.

On the settings page, click "WiFi". Select the connected wifi and click on the small exclamation mark on the right. Click "Ignore this network".

On the pop-up limb spike window, click the sedan shed to hit "ignore". Then reconnect to the internet and click on "Software Update".

Still no.

It's still going to happen.

You look at what's going on.

You look at what's going on.

It's okay to follow the method sent to you.

Okay, you can end it and like it to you.

Wait a minute. Hmmm.

I tried it the same way you did, and it's still the same.

You like it so that you can do it.