How can the broadband be disconnected as soon as it goes up? What to do if your broadband connection

It should be a problem with the property in your community, and it is recommended that you contact us.

1. It may be caused by DNS error, the solution is to select the "DNS Preferred" tool in the toolbox of Tencent PC Manager, click "Detect Now", after the detection, you can see the average value of DNS, the lower the average value means the faster the DNS response, select the "Enable" with the smallest average value.

2. If the distance from the router is too far away or the cavity penetrates through the wall too much, the signal strength is low, and very small fluctuations occur, which will lead to instantaneous disconnection and reconnection (generally difficult to detect). You can see the speed and strength of the connection status, if it is very low, it may lead to the inability to access the Internet, please adjust the distance or placement of the machine and the router, of course, you can also equip a high-gain directional antenna to amplify the signal.

3. The router has set security measures such as IP address restriction or MAC address binding, please check whether the router Zheng Pei has set IP address restriction or MAC address binding.

4. Reconfigure your wireless router.

5. If there is no problem with the above settings, then you need to reinstall the wireless network card driver.

6. If it is still invalid, it is recommended to back up important data and reinstall the operating system.

What to do if your broadband connection is disconnectedHello dear <>

Broadband connection disconnected |Broadband dial-up Internet access, automatically disconnected after connecting for a few minutes. Check for poor line contact. If you are a network administrator and the error message "Carrier Loss" is reported in the background, it means that the line is in poor contact, and it is recommended to check the line to solve the problem.

If you're a user, let's first understand the most basic wired network lines: After understanding the most basic wired network lines, start the "replacement test". Start by replacing the simplest network cable.

Replace an available network cable and observe whether the problem of "second breaking" occurs. If so, exclude. Description:

There may be a variety of reasons for the "poor contact" of the incoming network cable interface, not necessarily the physical poor contact, but also some other indirect reasons, such as adapters. Troubleshoot Wi-Fi switch conflicts. Hope it helps.

These are two completely different things: the local connection is the connection of the computer network card, the broadband connection is the connection of the system dial-up, this is only used for a machine and a network, usually the computer is connected to the LAN (including their own router), the work of the broadband connection has been completed by the router, the local connection of the computer is useless, and it will not have a network connection.

Extended information: 1. Sometimes we find that the local connection is gone, but we can still surf the Internet, this time it means that the hardware is no problem, so why doesn't the local connection appear on the desktop? Most of the reasons are due to the fact that you have accidentally set the local connection to hide when using the computer, or the local connection is not displayed properly due to virus damage.

2. Solution: If you have not set up a network connection recently, then you can generally find a local connection by using the following methods to solve it, first scan the computer to see if there is a virus to destroy the local connection, if there is a virus, it is likely to be damaged by a virus, and it is still not displayed after the virus is eliminated before we enter the next step.

Find "Internet Neighbors" (generally on the desktop, if you don't have it, you can also enter my computer on the left side) - right-click --- select Properties, and enter the following interface:

Reconnect.

1. If the computer is not connected to the router, you need to enter the broadband account password to dial up the broadband connection, and then connect locally to access the Internet.

2. If you are connected to a router, you only need to connect locally, if you can't access the Internet, please check whether the IP address, gateway and DNS settings are correct.

Second, it means that the router or modern has no dial-up and is not really connected to the server;

1. Turn off the power of all network devices for 1 minute and turn them back on.

2. Check the router and modern;

3. Check whether the network equipment connected to the computer is normal;

4. If the bandwidth fails, please call the operator for free maintenance.

Hello, under normal circumstances, broadband connection requires a login account and password, if you have no activity for a period of time or the computer screen is off, the broadband is idle, and you may automatically log out. I hope my answer helps!

Ask me what to do if I forgot my password.

What should I do if I forget my password?

Question: I'm a computer at home I forgot it for a long time Is there a way to solve it, I'm a computer at home I forgot it for a long time Is there a way to solve it?

Question, okay, thanks.

Oh ok, thanks.

If you use a router to surf the Internet, the setting of the network connection is done in the settings of the router, and the broadband account password is stored there, so there is no need to dial up.

If you have a router, you don't need a broadband connection to dial up, because the router has already dialed up? That's why we use routers, so we don't have to dial up every time we go online.

A broadband connection is the way you set up to dial-up the Internet. If you're switching to LAN access, i.e. a local direct switch or Wi-Fi, you don't need to worry about this prompt. If you're dialing up, you won't be able to access the Internet right now.