What is the reason why bees flap their wings at the door

There are several main reasons why bees flap their wings at the door:

1.Lowering the temperature of the nest: During the hot summer months, bees reduce the temperature inside the nest by flapping their wings.

2.Enhanced ventilation: As the bee colony grows, the inside of the hive becomes crowded, and the entrance to the hive is relatively small, resulting in a lack of oxygen inside. At this time, the bees increase air flow by flapping their wings, increasing the oxygen level in the nest.

3.Processed honey: When bees make honey from their flowers into honey and store it in their hives, in order to evaporate the water from the nectar, the bees speed up the evaporation of the water by flapping their wings in order to preserve the honey.

4.Guarding the hive: When bees feel threatened, they may protect the hive by flapping their wings at the door of the hive to warn potential enemies.

In conclusion, the act of flapping the wings of bees at the door is to maintain the stability of the environment in the hive and protect the interests of the entire colony.

Note that the bees are flapping their wings at the cave door, and in the same direction. This is because the density of bee colonies is large, in order to ensure that there is fresh air, in order to ensure that the temperature in the bee colony is not too high, in order to evaporate the excess water in the honey, there needs to be good ventilation, so that the bee colony can live and reproduce normally.

There are bugs in the peak box, or there are hornets to harass. One is to clean the bees, and the other is to eliminate the harassing wasps.

This is a normal phenomenon that bees often appear in summer, mainly due to the high temperature of the nest in the colony, and the reason for this phenomenon is that in addition to the high temperature in summer, there are too many bees in the colony.

The hive spleen is composed of thousands of nests built by bees with beeswax, and the hive is composed of a few to dozens of hive spleens. Worker bee.

Store honey and pollen in the nest of the spleen. They also use propolis.

Polishing the nest room for the queen bee to lay eggs in.

Bee larvae are raised in the nest and spun silk to pupate. Therefore, the composition of the nest spleen is complex, honey, beeswax, bee pollen.

Royal jelly, propolis, bee cocoons, larval secretions, etc., may be present in the nest spleen.

Breeding Method:

Heat preservation. Place 1 spleen after tightening the spleen in the beehive.

**, at this time the bee is enough to protect the spleen of the nest. Put 1 partition on one side close to the adjacent box, put 1 partition on the other side, and put insulation outside the board.

The practice of external insulation is: bedding grass at the bottom of the box, filling weeds between the two beehives, using plastic cloth to prevent moisture and insulation, and covering the beehive with plastic sheet in rainy days or colder evenings, so as to prevent blocking the nest door. In the evening, depending on the temperature conditions, the nest door can be closed.

Summer has hit, and now with the rise in temperature, bee friends in many areas have found a problem, that is, bees are lined up at the door of the bee hive and flap their wings desperately, why is there a situation where bee groups flap their wings differently? What should bee keepers do?

Friends who raise bees must pay attention, now, the summer has been in the ambush, the temperature is gradually breaking through the high temperature of 40 degrees, especially when we break the noon and afternoon time of the day, because the temperature inside our bee hive is too high, so the little bees will ventilate the door of the bee hive, play the role of air circulation, and use it to reduce the temperature inside our bee hive. This is also a survival nature of bees, because if the temperature inside the bee hive is too high, it will lead to rotten bee disease, so in the face of high temperature weather, bees will be at the door, 24 hours to fan their wings, to achieve the effect of reducing the temperature, encounter this problem, if we ignore it for a long time, it is very unfavorable to the development of the bee colony, the circumstances are serious, and even cause the bee colony to escape. So, what do we do about this kind of problem?

Solution 1: The first method is that friends with conditions can directly keep the bee colony under the shade of the tree and give them shade and sun protection.

Solution 2: The second method is to replace the large beehive, widen the beehive, and strengthen air circulation.

Solution 3: The third method is that the beehive should not be exposed to the sun, so novice beekeepers must pay attention to exposure, and exposure to the sun does not have any benefit to the bee colony. If you have a similar phenomenon in your bee colony, you can follow the three methods I mentioned above.

Through this method, after treatment, there are no bees with wings at the door of the beehive, indicating that the temperature inside the sealed box has dropped. If this article is helpful to you, you can learn more about beekeeping techniques with me.

When the hive first begins to have poor ventilation and lack of oxygen, there will be worker bees fanning the air at the door of the hive to strengthen ventilation and try to save the colony. After the beekeeper finds out, he must open the box and check whether the hive space is too small and the hive door is too small. If the colony is too strong and the hive is full of hives, it is also necessary to set up a relay box during the wintering period.

Even an empty relay box can avoid the appearance of heat injury bees. A strong bee colony is enough to resist low temperatures, so don't close the nest door too small, and pay attention to whether the nest door is blocked by bee corpses and foreign objects, and strengthen ventilation.

Be sure to increase ventilation in time, this may be caused by lack of ventilation, which may affect the health of the bees.

At this time, it is necessary to open the box and check it, and adjust the size of the nest door, which may be caused by impermeability.

In order to inform other honey source plants of the direction and distance.

When the "scout bees" discover the nectar source, they will quickly fly back to the hive, and then use "dance language" outside the hive to tell their companions the direction and distance of the nectar source plant. If the nectar source is relatively close, they will do a simple "circle dance"; If the nectar source is far away, they will perform a complex "swing dance".

The bee's "dance language" can convey a variety of information, such as the ability required to reach the nectar source, the nature of the nectar source, and the direction of its position relative to the sun. The work of receiving the information of the "dance language" will quickly reach the source of the honey. If the nectar source is not very far away, they can usually be reached within 5 minutes.

1. Reduce the nest temperature: When it is hot in summer, the fan of the bee colony lowers the temperature. 2. Strengthen ventilation

As the colony grows, the bees' internal reports become more and more crowded, and the doors of the hive are generally opened relatively small, resulting in severe hypoxia inside the colony. 3. Processed honey: Honey cannot be preserved with beeswax unless it is concentrated to a certain extent, so when the honey juice is divided into small droplets and hung in the hive to evaporate water, some bees lie on the hive and fan the wind.

4.Defend the Hive: Deter the enemy.

This is because bees are social insects, they have a strong ability to regulate the internal environment, by fanning the air at the door of the nest, they can reduce the room temperature, strengthen ventilation, and can also guard the hive and process honey.

This is mainly to regulate the temperature inside the nest, and it can also have the effect of ventilation.

The physical characteristics of bees are as follows:

Body: The body of the bee is divided into three body segments: head, thorax, and abdomen, and each body segment of the adult bee is covered with villi, and the junction of the thorax and abdomen is not as obvious and narrow as that of the wasp, and the body length varies depending on the species and type of bee (queen, drone, worker). Mouthparts:

The mouthparts of bees belong to the chewing and sucking hail trembling mouthparts, the upper jaw is developed and can be used to build nests and chew pollen, the lower jaw and lower lip are extended together to specialize into a straw that can suck nectar, and the lower lip and middle lip and lip tongue and lower lip whiskers are also extended into structures conducive to sucking nectar. Feet: Bees have 3 pairs of 6 legs, and the third pair of feet of worker bees has a special pollen basket and pollen brush, of which the pollen brush can brush off the pollen on the bee, mixed with saliva and nectar, it can be condensed into a pollen ball and packed in the pollen basket to bring back to the hive.

Wings: Bees have 2 pairs of 4 wings, the forewings are large, the hindwings are small, the front and rear wings are connected by wing hooks, and the longitudinal and transverse veins enclose a number of wing chambers. Chelication:

The bee's chela is specialized in an ovipositor, which consists of a dorsal needle and two abdominal needles, the root end of which is connected to the venom sac and internal organs, and the tip of the abdominal needle has several small barbs in the shape of a chamfer.

There are two pairs of wings.

A pair of large wings A pair of small wings.