What kind of brush should I choose for the beginner of model painting

Buy a set, 3 face pens and 4 flat pens.

I like to use a trumpeter, it's more durable.

If you don't know how to use the soil, don't use it first.,I think I'm still a vegetarian group Buy some cheap practice hands first.,But if it's cheap, you should pay attention to polishing.,Wait until you're proficient and then use the soil.。

Brushes with stiff bristles and flat heads are best not animal hair, do not use pointed brushes, paint is corrosive, and after using it for a long time, the hair will be brittle.

mark, if you don't have any experience in coloring, don't touch the paint, you won't be able to stand it. Although the brush is used well, it can achieve an effect that is not inferior to that of an airbrush

Gundam special mark pen has also been out of the very fine, 20 yuan a (visual estimate is but really do Gundam people do not use mark than the ground even if you buy the land is very fine, it is not good, this is a lazy method, the best way is to use Tamiya Franc paint + solvent, a large amount of dilution, and then use a small brush to absorb the paint (very thin) point to the line, the paint will automatically flow full of grooves, and so on, after drying, in the cotton swab sticky solvent just more than the place cleaned, straight and black effect is good

There is another way to replace it, which is to use zip lighter oil + Wensha Newton's acrylic oil paint, which can replace the ground franc paint and solvent on it

If you are just getting started, it is recommended to use a mark pen, after all, it is more convenient to paint with a simple pen, and the color is more uniform than the mark pen, but it is not easy to operate, and it is easy to leave pen marks.

by the way, if the landlord has money. It is advisable to buy a spray can, although the effect is a little inferior to that of an airbrush.

And it will burn money for long-term use, but it is easy to use, and the technical requirements are not as high as that of an airbrush.

The marker pen is too amateurish, so if you think it's troublesome, buy sprinkler irrigation. If you are not afraid of trouble and play with the model for a long time, it is recommended to start with an air pump and an airbrush

It is recommended to practice more pen painting, after all, the technique is practiced, use more solvents, a little thinner, a small amount of meals.

Trumpeters have a special pen set for models, which is more reasonable.

Tamiya has a single branch, which is more expensive, and some of the other large manufacturers of model brands also have their own related products, to see if there are goods in China, but the trumpeter's can still be guaranteed.

If you really can't buy a special pen, you can use an art pen instead, and a bristle pen is recommended, with more suitable hardness and absorption. The smallest brush is 000, 000 needs to have, up according to your needs to prepare a few.

Another: model pen consumables, after solvent corrosion, a pen is not used for long, so it needs to be carefully cleaned after use to prolong the service life.

It is better to use a watercolor pen. Marley's round-headed watercolor or drawing pen. The size depends on the size of your model. The brush is too soft. Preferably one for large, medium and one for small.

Painting the model is generally good with paint, and if you want to paint evenly, you can use the spray method, and if you want to paint in small places, you can use a marker.

Models can be divided into physical models (physical forms, concepts, physical objects with volume and weight) and virtual models (shapes and other practical expressions formed by digital representation using electronic data). The model display form is divided into plane display and three-dimensional display.

The solid model can be divided into static mode (a dynamic system that is physically relatively static and does not have energy conversion, and does not express the integrity of the structure and body composition under external forces), a booster model (based on the static model, which can be based on the action of external kinetic energy, does not change its own performance structure, and is detected by physical motion) and dynamic model (can generate kinetic energy through energy conversion, and has a power conversion system in its own structure. a relatively continuous form of physical motion that can be exhibited during the energy conversion process).

Virtual models are divided into virtual static models, virtual dynamic models, and virtual fantasy models.

It stands to reason that you should use an airbrush to paint a model. However, the price of this one is relatively high.

First of all, the pen has to be 300-500 and the color. It's not cheap, but the pump is generally above 1500.

The legend is like this.

Airbrush 130, air pump 250, a mg of **, will it be expensive?

Markers are used to draw lines and small areas of color, and places that cannot be touched, such as eyes, are not only unevenly applied to the table, but can also be erased by hand.

Markers are available in very fine and thick ones.

You can go to the art supply store and buy a small row pen.

When applying, dilute the pigment a little more, and when it is dry after painting, it is okay if it is uneven, and then apply it again, and so on until it is uniform.

However, there will be pen marks.

Or you simply use a spray can, about 7 yuan for domestic production, buy a Tamiya masking tape, the effect is okay, it's better than using a pen.

Friend, the soft-headed marker pen is not ordinarily expensive, just look at it, I'm also worried about it.

Dwarf oil, it's hard to repaint Transformers, I've been playing for four or five years, it's not that the process of spraying is difficult, but the process of disassembling is difficult, if you want to spray, you have to disassemble, and Transformers are not assembled, many rivets are not easy to disassemble, and if you don't dismantle well, the toy will be damaged, so let's start with Gundam spray, you don't need too complicated processes, you can practice slowly, tools first air pump and airbrush, if you are ready to play for a long time, it is recommended to buy a Yousuda air pump with self-shutdown in one step, six or seven hundred. There are all kinds of paints, water refills, matting paint, varnish, face pen, palette cuvette, covering tape, plain group tools are necessary for the Tamiya gold medal scissors, this needless to say that everyone in the circle knows, pen knife, water sandpaper, 800 marks to 1500 marks, if you want to save trouble and have money, you can directly buy a ghost chop grinder, more than two hundred, the effect is outstanding, can replace sandpaper, and tweezers, used to paste water stickers, all kinds of glue, model tools to identify Tamiya on the line, and outline pencils, Tamiya ultra-fine oily, or hook line mechanical pencil, Buy a few markers to use for details and color, but I don't think markers are very useful, so you can use a face reading pen instead.

Spraying and coloring are basically divided into the following types, please choose according to your personal situation:

1. Tool part:

1. Spraying: air pump (Haosheng can be), spray pen (if you have the ability to buy a county soldier, it is indeed different from a domestic pen, two can be), gas mask + exhaust fan (or you have the conditions to ventilate and do not need these), paint mixing dishes, etc. (you can consult the seller);

2. Hand painting: various types of pens, including those like brushes and brushes, are selected according to the position and size of the individual painting;

Second, the paint part:

Basically, choose specific paints according to your needs, but the paint is divided into so many kinds 1, water-based paint, can be hand-painted, low toxicity, low paint film strength, hand coating effect is generally 2, enamel paint, hand coating is the best to use, high toxicity, paint film strength is OK, hand coating effect is good 3, oil-based paint, high toxicity, suitable spraying, high paint film strength.

Spray gun model K3 Spray mold and auxiliary tools are designed and manufactured according to the spraying position and oil level, and the color and adhesion are OK paint. Turn on the air compressor and air hose After the spray gun is connected to the air pipe, turn on the air compressor to keep the air pressure stable. Adjust the air pressure and oil output of the spray gun according to the size of the product and the spraying area, and use boiling oil and paint according to 1:

1. The ratio is blended to the appropriate concentration, and the viscosity measuring cup can be used to test.

**Bar, there is a set of buys,

If you want to learn systematically, you can consider signing up for a live online class, and recommend CGWANG's online class. The teacher speaks carefully, you can watch it back after the class, and there are also the same type of recorded classes that you can learn for free (give away lifelong VIP).

Teach you how to color with a marker. No need to spray paint to make the model shine on the eyes.

If you're using a model with lacquer, if you're hand-painting, use a face brush, similar to the kind of gouache used for art... But it's a lot softer than that hair

What is ordinary? hg mg pg？Also How do you use pigments for coloring? With model paint? Or marker? The dark color on the marker should be replenished before water, and it is not possible to apply it with white.

Marker bar! It seems that some madmen don't use air pumps or airbrushes to make GUNPLA! Marker pen + pencil + finished GUNPLA!

Airbrushes are recommended.

If you use a marker, use 800 sandpaper to hit the surface of the model.

If the surface is rough, the paint will be able to hang.

The Gundam is available in a normal version, a deluxe version (joint plating only), an electroplating version, and a clear version. There is also a limited edition.

If you want to color, you can use a marker. However, when applying the paint, you must wait for the paint to dry completely before installation. Otherwise, it is easy to have the tragedy of cookie-making.

The lacquer of a marker pen usually starts to dry from the outside, which means that when you notice that the lacquer looks dry, the lacquer on the inside may not be completely dry. Be patient when applying the color and wait for it to dry completely.

One of the drawbacks of marker coloring is that it is easy to leave marks on the colored part.

Marker usage tutorial.

Therefore, many people will choose to use an air pump for painting, so that the color is even.

Spraying is simpler than hand coating, hand coating methods seem to be easy, but the coating effect is often not ideal, the requirements for paint mixing and brushes are relatively high, if you make do with military models, civilian definitely not.