Why did the man hide in the sugarcane field, dismantle the license plate and hide the car?

At 6:29 a.m. on October 21, the Traffic Police Brigade of the Binyang County Public Security Bureau received a report from sanitation workers, saying that a car had knocked down a female sanitation worker in the section near Lixinting on Kunlun Road, and the license plate was not clear, and the vehicle that caused the accident had fled the scene. The police on duty and 120 ambulance personnel quickly rushed to the scene for disposal. The sanitation worker (surnamed Lu, from Silong Town, in his 40s) who was hit died of a serious head injury.

At the scene of the accident, in addition to the deceased, a three-wheeled electric sanitation truck, and a broom, a small piece of silver-gray plastic fragments dropped by the vehicle involved in the accident were found on the ground. According to the sanitation workers at the scene, the vehicle involved in the accident was a silver-gray car similar to a van, and there was no tarpaulin in the rear compartment.

The police retrieved thousands of ** photos from several intersections near the accident scene to find the whereabouts of the vehicle that caused the accident. At 8 o'clock in the morning, the police who handled the case locked the suspect vehicle and found the contact information of the suspect owner. The police called the suspect's mobile phone, but no one answered, and the police sent a text message to the suspect asking him to go to the accident handling squadron for investigation as soon as possible.

The police handling the case went to the suspect's home twice in a row, patiently did the ideological mobilization work of the family, and demanded that Huang surrender as soon as possible. At around 2:40 p.m. that day, the suspect Huang surrendered to the Accident Handling Squadron of the Traffic Police Brigade of the County Public Security Bureau.

According to Huang's confession: At around 3 a.m. on October 21, when he drove to the Lixinting section of Kunlun Road in Binyang, he dozed off due to fatigue and did not see the traffic in front of him, and knocked down a sanitation worker who was sweeping the floor in the motorway in front of him.

After the accident, he did not stop for fear of being held legally responsible, but continued to drive along Huancheng East Road to escape. When he arrived at the intersection of Xinguicun on National Highway 324, Huang drove along the small mountain road into the village, hid the car in the sugarcane field, and then disassembled the license plate and hid it in the grass, and he had been hiding in the sugarcane field and did not dare to come out.

At 1:30 p.m., he walked from the sugarcane field to the side of National Highway 324 and took a bus to the accident squadron to surrender.

The process of rural housing reconstruction is mainly based on the following provisions of the Housing Registration Measures: Article 82 Villagers' houses built with homestead land in accordance with law and houses built with other collectively owned construction land in accordance with law may apply for housing registration in accordance with the provisions of these Measures. According to the current policy, rural villagers must first apply for homestead land to build houses, no matter where they are built, and only after obtaining approval can they build them.

However, it is policy to build a house on an existing homestead. First fill out the application for building a house in the village, and then go to the township for approval, and after approval, the county also has a record. A deposit is required.

It is best to use an angle grinder to cut the cover on the screw and cut it into a cross-shaped opening, and then you can put the screwdriver into the cut mouth, loosen the screw, and the license plate will be removed. Then go to the nearest repair department to sell the buckle cover, buy a few spare.

That thing is generally a one-time bad press will not go, to use the flat head to change the cone slowly get the round head in the middle into it, the master of the auto repair shop will generally get professional, do it and can be installed back, if you have a new or substitute you just use pliers to clip it off.

It's true, the new traffic law stipulates that license plates are not allowed to be on license plate racks, otherwise fines and points will be deducted.

Of course not, otherwise on the road, the traffic police will talk to you and drag the brigade.

That's tamper screws. Hard dismantling will destroy the protective cap.

As a last resort, many luxury cars had to remove the license plate holders because of traffic violations.

You also want to add a license plate holder.

Of course not, otherwise on the road, the traffic police will talk to you and drag the brigade.

1. Clamp the spring notch on the anti-theft screw seat on the spring seat.

2. Align the anti-theft screw cap at the spring notch just now, press one side to the bottom, and the other side will be warped because the spring is exposed.

3. Press the low end of the anti-theft screw cap with your hand, and use a hammer or vice to knock it on the cocked end.

Extended Materials. Car number plate.

Automobile license plate is a hard number plate with registration code issued by the vehicle management authority after the vehicle management authority has applied for a license plate after review, inspection and registration. First of all, look at the structure of the fixing screws of the car license plate, from the appearance of the car, the hidden screws are always more beautiful than the screws directly exposed outside, and the screws are not visible from the outside, and they are hidden in various ways. The fixing screws of the car license plate are like this, a small cylinder made of aluminum alloy material is added to the outside of the reinforcement screw, and then a cover is added in the middle of the small cylinder, and the reinforcement screws are covered, if you want to disassemble the cover, you can use a small screwdriver to insert it from the gap next to the cover, and then pry the cover out, and then use a suitable tool to loosen the screw of the car license plate.

As long as your sleeve doesn't obscure the number, you shouldn't remove it.

In the current police station, there are occasional few people who behave unscrupulously, and we also have a police station here, you can rely on him, brother, I support you,

Sue him, I support it. Only the DMV has the authority to remove license plates.

Because which license plate is 74110, it was removed.

It's not the location where you park, be careful next time.

It can be said that the vast majority of them are, especially on the highway, flying cars or something, don't die.

1. First of all, use an angle grinder to cut a straight mouth on the license plate one by one.

2. Then use a word change cone to extend into the license plate buckle straight mouth, and pry off the license plate.

3. Then use the cross cone to unscrew off the screws that fix the license plate.

4. Finally, use iron tongs to remove the entire license plate.

Precautions. A license plate, commonly known as a license plate, also refers to a vehicle number plate, which is a plate that is hung on the front and back of the car, usually made of aluminum, iron, plastic or paper, on which the registration number, registration area or other relevant information of the car is engraved.

The license plate is the number and information registration of each vehicle, and its main function is to know the area to which the vehicle belongs through the license plate, and the owner of the vehicle and the registration information of the vehicle can also be found according to the license plate.

If there are 8 holes in the front and rear of your car, but you are equipped with four when you are on the plate, then you do not need to charge when you apply again, if your car is damaged and fall off, at this time you will have to charge to apply for the vehicle management office, the specific charge situation is not the same as the standard of each province and city, generally 5 yuan 1.

How to remove the car license plate buckle cover:

To remove the license plate screw, a slotted cone is used, a cross cone and an angle grinder;

Plug in the power of the angle grinder, then hold the handle of the angle grinder with both hands, turn on the switch of the angle grinder with your right hand, and cut the screw cap on the license plate with an angle grinder. Note that when cutting, you must be stable to avoid damage to the license plate, there are a total of 8 screw caps, and use an angle grinder to cut a straight mouth one by one;

Use a slotted cone to reach into the straight mouth where the screw cap is cut by an angle grinder, and then pry off the screw cap;

After removing the screw cap, you can use the Phillips cone to unscrew the screw fixing the license plate, pay attention to the screw to be slower when screwing, to avoid the screw being screwed off;

If you don't have an angle grinder, you can try to use needle-nose pliers or duckbill pliers, clamp the screw ring firmly, and release the pliers after the screw ring is deformed;

Then use a straight cone to reach into the deformed place, and remove the cover of the screw cap with the help of inertia.

When the license plate arrives, do you install it yourself or go to the DMV to install it?

When the license plate arrives, you can choose to install it independently or in a 4S shop, and generally those who go to the traffic management office for installation are the people who go directly to the traffic management office to get the license plate. In fact, it is not difficult for the owner to install the license plate by himself, as long as a flathead screwdriver can be installed, there is no need to run a 4S shop. If you feel that you are more troublesome to install, you can choose to register at 4S points, because the license fee has been paid when buying a car, so they will not refuse you when you ask the 4S shop to help you get a license.

1. First of all, clean the surface of the screw, especially the rusty place, to facilitate the subsequent disassembly. The anti-theft screw cover issued by the vehicle management is generally made of steel as a whole, and it is generally difficult to pry it off without damage.

2. Find a small slotted screwdriver, poke it under the screw cover and pick it, mainly because there is a position to press the edge to do the bayonet, but it depends on luck, if you are lucky, you can loosen one or two bayonets, and then reach into the gap of the loose, and pry it out a little hard, you can pry the cover off.

3. If you can't pry it open with a flathead screwdriver, then use an electric drill, turn a hole in the screw cover, then make the hole bigger with pliers, and then put the Phillips screwdriver into the hole and unscrew the screws inside.

Twist the lid open, there are screws inside.

Pry the lid open and there are screws inside.