How much does floor tile waxing generally cost per square meter?

Generally, it is 4-6 yuan.

1. Wax at least three times, and rub the floor with a non-fluffy cloth or waxer each time to let the wax oil penetrate into the wood. 2. If you want to get a shiny effect, you should gently wipe and polish it with a soft cloth every time you wax it. 3. Or use polyester floor wax and brush it three times with a clean brush.

Pay special attention to floor joints. 4. Every time, after drying, polish the surface with very fine sandpaper, wipe it clean, and then hit it a second time, generally 4-6 yuan. 1. Wax at least three times, and rub the floor with a non-fluffy cloth or waxer each time to let the wax oil penetrate into the wood.

2. If you want to get a shiny effect, you should gently wipe and polish it with a soft cloth every time you wax it. 3. Or use polyester floor wax and brush it three times with a clean brush. Pay attention to floor seams.

4. After drying, polish the surface with fine sandpaper, wipe it clean, and then hit it a second time.

1. After waxing, it will be bright and bright. It is best to wash thoroughly before waxing to keep it free of dust and foreign matter. 2. Dry all of them, and if you can't leave a trace of water, you need to have no water residue.

Because where there is water, it is the first place to fade in the future. 3. Do not wax in the sun. It's okay to seal it a little, moderate ventilation is good for the cheering process.

Hope it helps.

Ground polishing, waxing how much is a square.

Ground polishing, waxing how much is a square town shirt pro! Hello, glad to answer for you. The ground throws the royal book cavity light, and the waxing is generally about 80 square meters.

In fact, waxing can be done by yourself, and no professional is required. Flow bend of waxing: 1. Wax at least three times, and rub the floor with a cloth or waxer without fluff each time to make the wax oil penetrate into the wood.

2. If you want to get a shiny effect, you should gently wipe and polish it with a soft cloth every time you wax it. 3. Or use polyesteramine floor wax and brush it three times with a clean brush. Pay special attention to floor joints.

4. Every time, after drying, polish the surface with very fine sandpaper, wipe it clean, and then hit it a second time, I hope mine can help you! Do you have any other questions?

Hello, dear. The question you inquired about will be answered here as follows: According to the ** of this procedure on my side, the normal square meter is 20 yuan.

Of course, the cost of working hours varies across the country, and ** is also different. Wood floor waxing method 1Remove garbage and dirt from the floor surface.

Use a vacuum cleaner to remove trash and dust from the surface of the floor. Wipe the stains on the floor with a diluted neutral detergent. Stains that are difficult to remove can be wiped with water.

2.Dry thoroughly. The moisture on the surface of the floor and the trenches is completely dry before waxing.

The time required varies depending on the season, but it usually takes more than half a day. 3.Cover the wall baseboards and furniture with tape and paper, purpose:

Prevents floor wax from contaminating walls, baseboards and furniture. 4.Shake the container with floor wax and stir well.

5.Apply carefully in the direction of the wood grain of the floor, and do not miss or unevenly thicken. Applying too little can cause uneven shading, and too much application can lead to poor film formation.

Keeping the thickness uniform is the key to waxing.