The Motorola L6g cannot be connected to the computer

Updated on technology 2024-06-13
11 answers
  1. Anonymous users2024-02-11

    Uninstall or reinstall the phonetools software Connect the phone (do not install the driver, and click to cancel the driver) Install the phonetools software (it will automatically install the driver of the connected phone model at the same time as the installation) After installation, you are in on the line!

    That's how mine works!

  2. Anonymous users2024-02-10

    Some of them are related to different data models, and your drivers don't match either!

  3. Anonymous users2024-02-09

    I've also encountered this problem.,You open the folder of the mpt software you installed and then open the folder called "inf".,There's a "file in it.,Run it and then plug in the phone.,Or it's okay to run with the phone.,Anyway, it's okay to try more That's the driver update.,It should be able to detect your phone.

    When I first bought the L6 1 year ago, it was the same, it couldn't be detected, and then I figured it out myself

  4. Anonymous users2024-02-08

    Is your cable plugged in?

  5. Anonymous users2024-02-07

    Maybe you're setting it up wrong.

    You can try shutting down before connecting.

    Or you check to see if there's a problem with the line connection.

    I've had cases before where I didn't connect because of a problem with the line.

  6. Anonymous users2024-02-06

    Crazy ......Brother, I've been in this situation ...... tooNever buy a Moto phone again in my life.

  7. Anonymous users2024-02-05

    Your machine is water refurbished.

  8. Anonymous users2024-02-04

    In the case of having an SD card.

    After setting "--connect to the computer" -- large-capacity storage "-complete", connect the data cable to the computer, and the data can be transferred. Before touching.

    In the case of no SD card, please install MPT, and then "Settings" - connect to the computer "- modem" - Complete", connect the data cable to the computer, and the data transfer can be realized.

    Use third-party software to make sure that you can find out how to connect with a 360 mobile phone assistant and automatically install the required controls.

    If the data cable is not well connected, it is recommended to change the data cable.

  9. Anonymous users2024-02-03

    In Settings - Connections - Select "Trap Beam Data Reservoir Orange Storage" or "Memory Card" mode, and then plug it into the computer, no driver is required.

    If the computer does not come out, refresh a simple shipment.

  10. Anonymous users2024-02-02

    Set it on your phone and set the connection to "mass storage" in the settings.

  11. Anonymous users2024-02-01

    First of all, your phone is sure that it is a motherboard problem, which is not easy to deal with!

    Judgment reason: the way you flash the phone is to go through the channel, and the reason why the E6 is better than the A1200 is because it supports transmission, and you use a data cable to connect the computer to go, so the situation you described will occur, the fault should appear on a separate chip on the motherboard of the mobile phone. If you have to repair it, go to the repair department and ask them to remove the chip, so that you only need to transmit, but the speed is slightly slower, and everything else is normal.

    But I advise you, just buy a memory card reader, it's cheap and save money!

    Good luck! If you have any questions, you can contact me!

Related questions
Which is better Nokia 5300 or Motorola L72 25
7 answers2024-06-13

Isn't E2 an arcade machine? Do you understand? As far as the landlord said about the two machines,It should be5300Better yet,After all, it's a serious ** machine,Although the pixel is only 1.3 million,But considering the current price,It's not easy。 >>>More

The Motorola L6 mobile phone can't turn on the machine to repair the phone, saying that the software
11 answers2024-06-13

It is recommended that you still don't mess up by yourself What he said about writing software is to flash the machine Of course, if you have friends around you who are relatively strong in computer knowledge, you can let them try it Go to L6 related forums to see **A brush package You can brush it yourself Of course, the premise is indeed a problem with mobile phone software In fact, flashing is a more mechanical operation Don't be scared by cumbersome steps As long as you have some computer knowledge, you can But for the sake of mobile phone security or find a computer knowledge strong to compare***.

Motorola L7 Common Faults 5
6 answers2024-06-13

The Motorola L7 is a straight version of the ultra-thin phone launched by Motorola in 2005. Motorola L7 uses sharp red to modify the fuselage, and the side effect looks amazingly thin L7, and returns to the theme of card thinning. With a delicate body and a net weight of 96g, the compact appearance is suitable for both men and women. >>>More

I forgot the unlock code for my Motorola L7
8 answers2024-06-13

**Motokit software, the mobile phone is connected to the computer, and you can directly view the unlock code, password, mobile phone password, etc.! It is a software specially designed for moto mobile phones, and you can also upload, **, delete (including the phone's own ringtones that you don't want), **, video screen, etc. You can also change settings, make backups, customize the sound of power on/off**, modify SEEM files, etc., which is very easy to use. >>>More

Motorola L71 flashing problem, how many points to give how many points!! Urgent!!! The master comes
14 answers2024-06-13

It's the boot version of your phone, which is a pretty high version, and generally speaking, the lower the version you want to flash, the better. >>>More