The Motorola L6 mobile phone can t turn on the machine to repair the phone, saying that the software

It is recommended that you still don't mess up by yourself What he said about writing software is to flash the machine Of course, if you have friends around you who are relatively strong in computer knowledge, you can let them try it Go to L6 related forums to see **A brush package You can brush it yourself Of course, the premise is indeed a problem with mobile phone software In fact, flashing is a more mechanical operation Don't be scared by cumbersome steps As long as you have some computer knowledge, you can But for the sake of mobile phone security or find a computer knowledge strong to compare***.

Find a friend who can brush the machine, let him teach you how to brush, if there is no one around who will do this, you can post on the Internet for help, let the master assist remotely.

There are a lot of failures caused by broken mobile phone software, including not turning on, and it is not difficult to write software, but you don't want to mess up yourself, because if you brush the mobile phone program badly, you may scrap the mobile phone font, then it's a little troublesome, to change to a new one, you can go to a professional place to go to a professional place, don't be afraid of wasting that little money, hehe.

If you want to change a few other mobile phone repairs, if you say the same, let them fix it, and you'd better not mess around.

Oh, then you don't have to look for a customer race within the warranty period. Hey, mess around, mess with a dead horse as a live horse doctor.

As long as the security forum said to find the right version number and be more main, you can do it.

Hehe, actually, I also want to brush the machine, but I haven't learned. Hehe.

Kiss <>

Check whether the battery is charged, the battery is dead, the mobile phone naturally has no power to turn on, if it won't start no matter how you rush it, you can check whether the charger is working, whether the interface is damaged, charge it with universal charge or detect the power. Step 2: Check whether the battery is damaged or the life has expired, the battery is a consumable, if it is damaged or improperly used causes the battery to be damaged prematurely, you can try to replace a battery to see if it can start, if the problem is solved, the battery needs to be replaced.

If you can't turn it on, there may be a problem with your mobile phone system, it is recommended that you can double clear your phone to try! The specific steps are as follows, <>

Press and hold the power button + volume up button to enter recovery mode in the shutdown state, select wipe date factory reset to clear data and restore factory settings, and wipe cache partition to clear cache data, all click OK.

Then select Reboot System Now to reboot the system, and the phone should be able to reboot automatically! If Shuangqing is useless for your phone, then there may be a problem with your phone's hardware! It is possible that your mobile phone motherboard is burned out or the screen cable is broken, it is possible, take it to the after-sales service point to test it!

Make sure the battery is charged, or powered on when charged. Enter the official recovery to restore factory settings, the method is to press the boot and volume down at the same time, release after the triangle exclamation mark appears, press the volume plus and minus at the same time, use the volume button to select wipe data factory reset, press the power button to confirm, after completion, the same method selects reboot system now to restart, generally doable.

1.First of all, you should judge whether the mobile phone is out of power, charge the mobile phone for a while, and then turn it on to try, the mobile phone can not be turned on due to no power, this situation is very common.

2.If it is a mobile phone with a replaceable battery, open the back cover of the phone to see if the battery is loose, causing poor contact, take off the battery and put it back in, or put a small piece of paper underneath it, and then try to turn it back on.

3.If it is a mobile phone that has not been used for a long time, it may be that the battery has entered a dormant state, and at this time, you can use the universal charge to charge the battery to activate, or to activate it after the sale, and then try to restart it.

4.Press and hold the power button and the volume (+) or (-) button, different manufacturers of mobile phones are different, see if you can enter the mobile phone engineering mode, if you can restore factory settings.

5.If the above methods do not work, you should go to the after-sales service to check whether there is a problem with the motherboard, the motherboard is broken, and the motherboard is generally replaced, if the motherboard is too expensive, you can only replace the machine.

If the Motorola mobile phone cannot be turned on, it is recommended to press and hold the power button for about 10s to force a restart attempt, or use the standard charger to charge the mobile phone for about 30 minutes before turning it on.

If there is still this problem, it is recommended to go to the repair point to see if there is a hardware problem, if this kind of problem occurs occasionally, you can refer to the method:

1.Factory reset or double clear data can solve this problem;

2.Flashing can completely solve the problem;

3.If none of the above methods work, it is recommended to send it to the after-sales service.

If it can't be turned on, it is recommended to press and hold the power button for about 10s to force restart it;

If not, please use the standard charger to charge the phone for about 30 minutes before trying to turn it on according to the appeal method;

If there is still a problem, it is recommended to contact the after-sales inspection for processing.

Double cleaning can also be carried out, and the operation is as follows:

Make sure the battery is charged, or powered on when charged.

If you can't turn on the machine as above, make sure that the battery has enough power to start the case, enter the official recovery to restore the factory settings, the method is to press the boot and volume down at the same time, release the triangle exclamation mark after the triangle exclamation mark appears, press the volume plus and minus at the same time, use the volume button to select wipe data factory reset, press the power button to confirm, after completion, the same method is to choose reboot system now restart, generally possible. Note that the first boot after WIPE will be slower than usual, and the WIPE operation will delete all user profiles and user-installed apps.