How to fix the USB flash drive that can t be read on the computer

You can try to use the disk check tool that comes with Windows: In the Windows operating system, you can use the disk check tool to scan and recover errors in the USB flash drive. Open the "My Computer" or "Computer" window, right-click on the USB flash drive, select "Properties", then select the "Tools" tab, click the "Check" button, and follow the prompts.

If the data of the USB flash drive is accidentally lost, it is recommended to use a professional data recovery tool to recover the data as soon as possible.

The specific operation demonstration process is as follows:

1. Open the software interface and click on the function setting option that needs to be restored.

2. Find the original storage location of the lost files, confirm that they are correct, and click the Start Scan function button.

<>4. After the file progress bar is successfully restored, click the "Open" button to view the successfully recovered files.

Note that the success rate of recovering files depends on a variety of factors, such as file size, storage device type, and how long the files were overwritten. Therefore, if you want to maximize your chances of a successful recovery, it is recommended that you stop using the device as soon as possible and carefully read the instructions of the recovery software before attempting to recover your files.

If the USB flash drive can be recognized on the computer, but it can't be opened, it's good to format it generally.

If the prompt cannot be formatted, you need to find the corresponding mass production tool to use.

Most of the problems of the USB flash drive can be fixed by using mass production tools.

Summary. Dear, Hello, USB flash drive on the computer does not read data recovery method.

Hold down the win+r key, open the run box, enter the command, click OK, open the management template, click the system, select removable storage access, find all removable storage classes, right-click the permissions of all removable storage classes, change this to the permissions of the unconfigured storage class, and click OK.

How to fix the USB flash drive that can't be read on the computer

Dear, hello, U disk on the computer does not read data recovery method Hold down the win+r key, open the run box, enter the command, click OK, open the management template, click the system, select removable storage access, find all removable storage classes, right-click the permissions of all removable storage classes, change here to the permissions of the storage classes that are not configured, click OK.

In addition, the U disk cannot be read, and there are many situations, which can be dealt with on a case-by-case basis: 1) the U disk is inserted into the computer, and there is no response, (1) In the computer management - disk management, the U disk device is not found. (2) In computer management - disk management, if you find that the U disk device needs to add a drive letter to the U disk (right-click menu - add a drive letter), it can be displayed and used 2) The U disk is inserted into the computer, and there is a response, (1) The prompt is not recognized in this case, generally the U disk is broken, the crystal oscillator or the main control is faulty, and it cannot be correctly identified.

2) There is a drive letter, indicating that it cannot be opened or not formatted, at this time, it needs to be in Computer Management - Disk Management. See if the size of the USB flash drive is normal; If it is abnormal, it means that there is a problem with the storage medium and needs to be re-produced to fix it. If the size is normal, it means that the partition is wrong, you can use WinHEX tool - open the disk, check the partition and file system on the USB flash drive, and use it after repairing the partition error.

This is the case.

The USB flash drive is normal. Dear, this situation is just fine with the first way I set it up.

In the case that the USB flash drive is not damaged, there are two solutions. Method 1: After plugging in the USB flash drive, open the Windows icon in the lower left corner, search for and open the "Device Manager", find the "Universal Serial Bus Controller", there will be a "Large-capacity device" in it, delete the display and restore it again.

Method 2: Press and hold the "Windows+I key" at the same time, find "Device" in the pop-up interface, click "Connected Device", delete "Disk", and plug it back in.

Ask about custom messages].

Summary. Depending on your problem, there are two solutions to make the following solutions for you in case the USB flash drive is not corrupted. After plugging in the USB flash drive, open the Windows icon in the lower left corner, search for and open the "Device Manager", and find the "Universal Serial Bus Controller", there will be a "Large-capacity device" in it, which can be restored after deleting the display.

At the same time, press and hold the "Windows+I key", find "Device" in the pop-up interface, click "Connected Device", delete "Disk", and plug it back in. If the above two methods are not available, the USB flash drive may be damaged, and it is recommended to copy the data first.

How to fix the USB flash drive that can't be read on the computer

Depending on your problem, there are two solutions to make the following solutions for you in case the USB flash drive is not corrupted. After plugging in the USB flash drive, open the Windows icon in the lower left corner, search for and open the "Device Manager", and find the "Universal Serial Bus Controller", there will be a "Large-capacity device" in it, which can be restored after deleting the display. At the same time, press and hold the "Windows+I key", find "Device" in the pop-up interface, click "Connected Device", delete "Disk", and plug it back in.

If the above two methods are not available, the USB flash drive may be damaged, and it is recommended to copy the data first.

If you think mine is helpful to you, please give it a thumbs up, I wish you a happy life, thank you!